Number of Articles: 17
The first page
Experimental Prediction of Buckling Load of Rectangular composite Plate with through-the-width Delamination using Nondestructive Vibration Correlation Technique
Pages 813-822
Investigation of tribological properties of Zn/ZnO nanocomposite targets produced by cold spray process
Pages 823-832
Mathematical modeling of mechanical properties of PA6/NBR/Clay Nanocomposites Fabrication using the Thermal Friction Stirs Processing
Pages 833-842
An Experimental Investigation on the Effect of 3-D Stresses at Free Edges on the Failure of Composite Laminates under Distributed Lateral Load
Pages 843-854
Effect of processing parameters on tensile properties of FDM 3D printed of PLA specimens
Pages 855-862
Application of cotton/epoxy laminated composites to fabricate the uni- and bi-directional cosine corrugated cores sandwich panels
Pages 863-872
Enhanced wear resistance of pure tin by addition of bronze and Fe-C reinforcing particles
Pages 873-880
Experimental and Numerical Studies on the Effect of Hollow Glass Fiber Presence and Orientation on the Tensile Behavior of Epoxy/Glass Fiber Composite
Pages 881-890
The effect of modified zirconia nanoparticles on the mechanical response of basalt fibers- epoxy composite under tensile loading
Pages 891-896
Resistance of Singly-Curved Sandwich Shells with Metal Microlattice Core under Transverse Loading
Pages 897-906
Developing homotopy perturbation method to investigate the nonlinear vibration of a Porous FG-Beam subjected to the external excitation
Pages 907-916
An investigation on the effect of atmosphere, degree of compacting, heating rate, and presence of diluent on the mechanism of evolutions occurred in the Al+B2O3+Si+WO3 aluminothermic System
Pages 917-930
Young modulus and longitudinal damping coefficient of the composite copper reinforced by carbon nanotubes
Pages 931-940
Strength improvement by mean of adherend notching and adherend taper in the adhesive single lap joints
Pages 941-948
Study of the phase transformations in Al-V2O5 composite fabricated by spark plasma sintering process
Pages 949-960
In–situ synthesis of ZnFe2O4-Ce-doped/Carbon nanofiber composite via electrospinning approach
Pages 961-968