[1]Mazumdar, S.K., Composites Manufacturing Materials, Product, and Process Engineering, 1st ed., CRC Press LLC, USA, 2002.
[2]Ibrahim, I. A., Mohamed F.A. and Lavernia E.J., “Particulate Reinforced Metal Matrix Composite”, Journal of Materials Science, Vol. 26, pp. 1137-1156, 1991.
[3]Sedighi, M. Shakibaei-Nasab, M. and Jabbari-Mostahsan, A.H., “Fabrication of FGM sheet of aluminum matrix composite using powder metallurgy and hot-rolling processes”, In Persian, Journal of Science and Technology of Composites, Vol. 6, No. 1, pp. 69-78, 2019.
[4]Miracle, D.B., “Metal Matrix Composite – From Science to Technological Significance”, Composites Science and Technology, Vol. 65, pp. 2526-2540, 2005.
[5]Rousta, Z., Khosravi, H., Tohidlou, E.,“Effect of Er addition on the microstructural characteristics and compressive behavior of insitu Al-15 wt.% Mg2Si composites”, In Persian, Journal of Science and Technology of Composites, Vol. 6, No. 2, pp. 242-247, 2019.
[6]JenabaliJahromi, S.A., MoazamiGoudarzi, M. and Nazarboland, A., “Failure Analysis ofGE-F9 Gas Turbine Journal Bearings”, Iranian Journal of Science and Technology, Vol. 32, No. B1, pp. 61-66, 2008.
[7]MoazamiGoudarzi, M., JenabaliJahromi, S.A. and Nazarboland, A., “Investigation of Characteristics of Tin-Based White Metals as a Bearing Material”, Materials and Design, Vol. 30, pp. 2283–2288, 2009.
[8]Wu, H., Zhu, Sh., Cheng, J., Qiao, Zh. and Yang, J., “Tribological Behavior of Tin-Based Babbitt Alloy Lubricated by Seawater”, Tribology Transactions, Vol. 59, pp. 838-844, 2016.
[9]Ho, C.T., “Coated Carbon Fibres and their Composites with Tin-Lead Matrix”, Journal of Materials Science Letters, Vol. 14, pp. 135-138, 1995.
[10]Leszczynśka-Madej, B., Madej, M. and Hrabia-Wiśnios, J., “Effect of Chemical Composition on the Microstructure and Tribological Properties of Sn-Based Alloys”, Journal of Materials Engineering and Performance, Vol. 28, pp. 4065-4073, 2019.
[11]Junior, P.R.C.A. and Pukasiewicz, A.G.M., “Evaluation of Microstructure, Mechanical and Tribological Properties of a Babbitt Alloy Deposited By Arc and Flame Spray Processes”, Tribology International, Vol. 131, pp. 148-157, 2019.
[12]Ni, Y., Li, X., Dong, G., Tong, Zh. and Mei, T., “The Combined Effect of La and Heat Treatment on The Tribological Performances of Tin-Babbitt Alloy”, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology Vol. 233, pp. 117-1126, 2019.
[13]Dhanabalakrishnan, M., Sangaravadivel, P., Babu,N.and Shenbagaraj, R., “Development of Particulate Reinforced MMC to Improve Tribological Properties for Bush Bearing”, International Journal of Scientific and Engineering Research, Vol. 4, pp. 1-8, 2013.
[14]Gujar, R.S. and Navthar, R.R., “Tribological Investigation and Development of Tin Based Babbitt Composite Material”, International Research Journal of Engineering and Technology, Vol. 4, pp. 3190-3196, 2017.
[15]Tasgin, Y., “Effect of MgO, Al2O3 and FeCr2O4 on Microstructure and Wear Resistance of Babbitt Metal (Sn–Sb–Cu)”, Materials Research Express, Vol. 6, 046548, 2019.
[16]HO, C.T.,” Wear of Carbon Fibres – Reinforced Tin-Lead Alloy Composites”, Journal of Materials Science Letters, Vol. 16, pp. 1767-1770, 1997.
[17]ASTM G99-05, Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus.
[18]Khonsari, M.M. and Booser, E.R., Applied Tribology: Bearing Design and Lubrication, 2nd ed., John Wiley & Sons, New York, 2008.
[19]Rouhi, M., Moazami-Goudarzi, M. and Ardestani, M., “Comparison of effect of SiC and MoS2 on wear behavior of Al matrix composites”, Transactions of Nonferrous Metals Society of China, Volume 29, pp. 1169-1183, 2019.
[20]Moazami-Goudarzi, M. and Nemati, A., “Tribological behavior of self lubricating Cu/MoS2 composites fabricated by powder metallurgy”, Transactions of Nonferrous Metals Society of China, Volume 28, pp. 946-956, 2018.
[21]Bhushan, B., Principles and Applications of Tribology, 2nd ed., John Wiley & Sons, New York, 2013.
[22]Matucha, K.H., Materials Science and Technology, Structure and Properties of Nonferrous Alloys, 1st ed., Wiley, USA, 1996.
[23]Moazami-Goudarzi,M. and Akhlaghi, F., “Wear Behaviour of Al 5252 Alloy Reinforced with Micrometric and Nanometric SiC Particles”, Tribology International, Vol. 102, pp. 28-37, 2016.
[24]Lopez, A.J., Rodrigo, P., Torres, B. and Rams, J., “Dry Sliding Wear Behavior of ZE41A Magnesium Alloy”, Wear, vol. 271, pp. 2836-2844, 2011.
[25]Taltavull, C., Torres, B., Lopez, A.J., and Rams, J., “Dry Sliding Wear Behavior Of AM60B Magnesium Alloy”, Wear, Vol. 301, pp. 615–625, 2013.