[1]Nakhaei, M.R. Mohammadi, Sh. Naderi, Gh. and Ghoreishy, M.H.R., Kh., “Experimental study of microstructure, thermal and mechanical properties of PA6/NBR nanocomposites reinforced with graphene nanoparticle”, In Persian, Journal of Science and Technology of Composites, In press.
[2]Jalilian, H. Naderi, G. and Shokoohi, S., “Investigation on the Microstructure and Properties of PVC Toughened with DOP/PMMA/Nano-Graphene”, In Persian, Journal of Science and Technology of Composites, Vol. 5, No. 3, pp. 451-456, 2018.
[3]Lim, S.-H., Dasari, A., Yu, Z.-Z., Mai, Y.-W., Liu, S. and Yong, M. S., “Fracture Toughness of Nylon 6/Organoclay/Elastomer Nanocomposites“ Composites Science and Technology, Vol. 67, No. 14, pp. 2914-2923, 2007.
[4]Esmizadeh, E. Sahraeian, R. Mosalmani, R. Naderi, Gh and Esfandeh, M., “Mechanical behavior of nanoperlite/nanoclay hybrid nanocomposites based on polyethylene: Experimental and numerical validation of hyperelastic models”, In Persian, Journal of Science and Technology of Composites.
[5]Attari, M., Arefazar, A. and Bakhshandeh, G., “Mechanical and Thermal Properties of Toughened PA6/HDPE/SEBs‐G‐Ma/Clay Nanocomposite“ Polymer Engineering & Science, Vol. 55, No. 1, pp. 29-33, 2015.
[6]payandehpeyman, J. Majzoobi, Gh. and Bagheri, R., “Experimental, Analytical and Numerical Investigation of Polypropylene Nanocomposites Microhardness”, In Persian, Journal of Science and Technology of Composites, Vol. 3, No. 2, pp. 165-176, 2016.
[7]Fakirov, S., “Handbook of Condensation Thermoplastic Elastomers“, John Wiley & Sons, 2006.
[8]Mahallati, P., Arefazar, A. and Naderi, G., “Thermal and Morphological Properties of Thermoplastic Elastomer Nanocomposites Based on PA6/NBR " International Polymer Processing. Vol. 25, No.2, pp.132-8, 2011.
[9]Lee, H.-s., Fasulo, P. D., Rodgers, W. R. and Paul, D., “TPO Based Nanocomposites. Part 1. Morphology and Mechanical Properties“ Polymer, Vol. 46, No. 25, pp. 11673-11689, 2005.
[10]Khosrokhavar, R., Naderi, G., Bakhshandeh, G. R. and Ghoreishy, M. H. R., “Effect of Processing Parameters on PP/EPDM/Organoclay Nanocomposites Using Taguchi Analysis Method“ Iran Polym J, Vol. 20, pp. 41-53, 2011.
[11]Mostafapour, A., Naderi, G. and Nakhaei, M. R., “Theoretical Models for Prediction of Mechanical Behaviour of the PP/EPDM Nanocomposites Fabricated by Friction Stir Process“ Polyolefins Journal, Vol. 4, No. 1, pp. 99-109, 2016.
[12]Mishra, R. S., Ma, Z. and Charit, I., “Friction Stir Processing: A Novel Technique for Fabrication of Surface Composite“ Materials Science and Engineering: A, Vol. 341, No. 1-2, pp. 307-310, 2003.
[13]Sharma, S. R., Ma, Z. and Mishra, R. S., “Effect of Friction Stir Processing on Fatigue Behavior of A356 Alloy“ Scripta Materialia, Vol. 51, No. 3, pp. 237-241, 2004.
[14]Azarsa, E. and Mostafapour, A., “On the Feasibility of Producing Polymer–Metal Composites Via Novel Variant of Friction Stir Processing“ Journal of Manufacturing Processes, Vol. 15, No. 4, pp. 682-688, 2013.
[15]Barmouz, M., Seyfi, J., Givi, M. K. B., Hejazi, I. and Davachi, S. M., “A Novel Approach for Producing Polymer Nanocomposites by in-Situ Dispersion of Clay Particles Via Friction Stir Processing“ Materials Science and Engineering: A, Vol. 528, No. 6, pp. 3003-3006, 2011.
[16]Zinati, R. F., “Experimental Evaluation of Ultrasonic-Assisted Friction Stir Process Effect on in Situ Dispersion of Multi-Walled Carbon Nanotubes Throughout Polyamide 6“ The International Journal of Advanced Manufacturing Technology, Vol. 81, No. 9-12, pp. 2087-2098, 2015.
[17]Mostafapour, A., Naderi, G. and Nakhaei, M. R., “Effect of Process Parameters on Fracture Toughness of PP/EPDM/Nanoclay Nanocomposite Fabricated by Novel Method of Heat Assisted Friction Stir Processing“ Polymer Composites, Vol. 39, No. 7, pp. 2336-2346, 2018.
[18]Mostafapour, A., Akbari, A. and Nakhaei, M., “Application of Response Surface Methodology for Optimization of Pulsating Blank Holder Parameters in Deep Drawing Process of Al 1050 Rectangular Parts“ The International Journal of Advanced Manufacturing Technology, Vol. 91, No. 1-4, pp. 731-737, 2017.
[19]Zhang, L., Wan, C. and Zhang, Y., “Investigation on Morphology and Mechanical Properties of Polyamide 6/Maleated Ethylene‐Propylene‐Diene Rubber/Organoclay Composites“ Polymer Engineering & Science, Vol. 49, No. 2, pp. 209-216, 2009.
[20]Nakhaei, M. R., Mostafapour, A. and Naderi, G., “Optimization of Mechanical Properties of PP/EPDM/Clay Nanocomposite Fabricated by Friction Stir Processing with Response Surface Methodology and Neural Networks“ Polymer Composites, Vol. 38, pp. E421-E432, 2017.
[21]Nakhaei, M., Naderi, G. and Mostafapour, A., “Effect of Processing Parameters on Morphology and Tensile Properties of PP/EPDM/Organoclay Nanocomposites Fabricated by Friction Stir Processing“ Iranian Polymer Journal, Vol. 25, No. 2, pp. 179-191, 2016.
[22]Huang, Y., Meng, X., Xie, Y., Wan, L., Lv, Z., Cao, J. and Feng, J., “Friction Stir Welding/Processing of Polymers and Polymer Matrix Composites“ Composites Part A: Applied Science and Manufacturing, Vol. 105, pp. 235-257, 2018.