Journal of Science and Technology of Composites

The first page

• Editorial
• PDF 437.08 K

Fabrication and mechanical characterization of Cu-Fe FGM produced by powder metallurgy method

Pages 335-342

10.22068/jstc.2018.60199.1289

Seyed Mohammad Reza Khalili, Maryam Torabian, Reza Eslami-Farsani

• View Article
• PDF 1.06 M

Improvement in interlaminar shear strength and flexural properties of carbon fiber/epoxy composite using surface-modified carbonate calcium

Pages 343-350

10.22068/jstc.2019.92187.1464

Soraya Shahbakhsh, Hamed Khosravi, Esmaeil Tohidlou

• View Article
• PDF 830.45 K

Experimental and numerical investigation of effect of shape of ribs on flexural behavior of curved composite sandwich panels with lattice core under

Pages 351-362

10.22068/jstc.2019.92523.1465

Soroush Masoumiasl, Gholamhossein Rahimi

• View Article
• PDF 1.63 M

Effect of heat treatment on microstructure and wear behavior of in-situ formed Al 3003/Al3Zr+ Al3Ti composite fabricated via friction stir processing

Pages 363-373

10.22068/jstc.2019.95983.1480

Mojtaba Zadali Mohammad kotiyani, khalil Ranjbar

• View Article
• PDF 1.83 M

Detection of Different Defects in Carbon Fiber Reinforced Polymer Matrix Laminated Composite under Tension by Vibration Analysis

Pages 373-384

10.22068/jstc.2019.97242.1489

Mohammad Azadi, Nezamoddin Raeisi, Seyed Ashkan Moosavian, Meysam Shakouri

• View Article
• PDF 1.53 M

The effects of SiC particles on the microstructure and hardness of cold sprayed Al-SiC composite coating

Pages 385-392

10.22068/jstc.2019.97600.1492

Zahra Eyvazi, Amir Abdollah-Zadeh, Hamid Ziaei, Rajabali Seraj, Firooz Kargar

• View Article
• PDF 886.63 K

Strength improvement of composite-steel lap joint by grading the joint area with carbon and glass fiber and also mechanical interference by reverse step

Pages 393-400

10.22068/jstc.2019.92109.1473

Alireza Dadian, Saeed Rahnama, Abbas Zolfaghari

• View Article
• PDF 952.63 K

Effect of graphene oxide reinforcement on the ballistic properties of Al6061-GO nanocomposite

Pages 401-410

10.22068/jstc.2019.96375.1482

Mahdi Hedayatian, Khodadad Vahedi, Alireza Nezamabadi, Amir Momeni

• View Article
• PDF 1.09 M

An experimental study of the effects of carbon nanotube and graphene addition on the impact strength of Epoxy/Basalt fiber composite

Pages 411-418

10.22068/jstc.2019.97533.1490

Hossein Bashiri Goodarzi, mehdi Yarmohammad Tooski

• View Article
• PDF 872.95 K

Experimental study of microstructure, thermal and mechanical properties of PA6/NBR nanocomposites reinforced with graphene nanoparticle

Pages 419-426

10.22068/jstc.2019.97568.1491

Mohammad -Reza Nakhaei, Shohreh Mohammadi, Ghasem Naderi, Mir -Hamidreza Ghoreishy, Ghasem Naderi

• View Article
• PDF 908.67 K

Experimental study of the compression behavior of Graphene Oxide and Nano-clay reinforced polycarbonate nanocomposites at low strain rates

Pages 427-434

10.22068/jstc.2019.98620.1499

Hossein Malekmohammadi, Gholamhossein majzoobi, Javad Payandehpeyman

• View Article
• PDF 851.99 K

A review of recent studies on self-healing smart composites for application in dentistry

Pages 435-450

10.22068/jstc.2019.99708.1501

Fatemeh Ahangaran, Amir H. Navarchian

• View Article
• PDF 1.58 M

New Hybrid Approach in Obtaining Plastic properties by Nanoindentation, Finite Element Method and Modified Dimensional Analysis

Pages 451-464

10.22068/jstc.2019.97778.1497

Abolfazl Darvizeh, Ehsan Bazzaz, Majid Alitavoli, Mehdi Yarmohammad Tooski

• View Article
• PDF 1.48 M

Fabrication and analysis of composite bipolar plates with expanded graphite to increase electrical conductivity of fuel cells

Pages 465-472

10.22068/jstc.2019.103279.1511

Poorya Poostan, Rasool Abdullah Mirzaie, Faramarz Ashenai Ghasemi, Elghar Abdullahi

• View Article
• PDF 1.21 M

The effects of Al2O3 particles on the microstructure and hardness of cold sprayed Al-Al2O3 composite coating

Pages 473-480

10.22068/jstc.2019.104435.1517

Hamid Ziaei, Amir Abdollah-zadeh, Zahra Eyvazi, Rajabali Seraj, Firooz Kargar

• View Article
• PDF 1.19 M

Design, preparation, characterization and biological investigation of Sodium Alginate/ Flourohydroxyapatite composite scaffold for bone tissue engineering application

Pages 481-490

10.22068/jstc.2019.98558.1498

Mohammad Soltani, Mardali Yousef-Pour, Zahra Taherian

• View Article
• PDF 891.35 K