[1] Hermann, A., T. Chaudhuri, and P. Spagnol," Bipolar Plates for PEM Fuel Cells A Review,". International Journal of Hydrogen Energy, 30(12): p. 1297-1302, 2005.
[2] Dhakate, S.R., et al., "Expanded Graphite-Based Electrically Conductive Composites as Bipolar Plate for PEM Fuel Cell,". International Journal of Hydrogen Energy, 33(23): p. 7146-7152,2008.
[3] Afshari, E, "Analysis of Function PEM Fuel Cell in Vehicle," In Persian, Journal of Engine Research, Vol. 5, No. 16, PP.3-15,2008.
[4] N. Mohammadtabar, M. Bakhshi-Jooybari, S.J. Hosseinipour, A.H. Gorji, "Study of Effective Parameters Inhydroforming of Fuel Cell Metallic Bipolar Plates with Parallelserpentine Flow Field," In Persian, Journal of Modares Mechanical Engineering, Vol. 14, No. 8, pp. 17 27, 2014
[5] Chunhui, S., P. Mu, and Y. Runzhang, "The Effect of Particle Size Gradation of Conductive Fillers on the Conductivity and the Flexural Strength of CompositeBipolar Plate,". International Journal of Hydrogen Energy, 33(3): p. 1035-1039,2008.
[6] Kang, S.-J., et al., "Solvent-Assisted Graphite Loading for Highly Conductive Phenolic Resin Bipolar Plates for Proton Exchange Membrane Fuel Cells,". Journal of Power Sources, 195(12): p. 3794-3801, 2010
[7] Taherian, R., "A Review of Composite and Metallic Bipolar Plates in Proton Exchange Membrane Fuel Cell: Materials, Fabrication, and Material Selection,". Journal of Power Sources, 265: p. 370-390, 2014
[8] Bourell, D.L., et al., "Graphite-Based Indirect Laser Sintered Fuel Cell Bipolar Plates Containing Carbon Fiber Additions,". CIRP Annals, 60(1): p. 275-278, 2011
[9] Kang, K., et al., "Development of Ultralight and Thin Bipolar Plates Using Epoxy-Carbon Fiber Prepregs andGraphite Composites," International Journal of Hydrogen Energy, 42(3): p. 1691-1697, 2017
[10] Heo, S.I., et al., "Development of Preform Moulding Technique Using Expanded Graphite for Proton Exchange Membrane Fuel Cell Bipolar Plates,". Journal of Power Sources, 171(2): p. 396-403, 2007.
[11] Lee, D. and D.G. Lee, "Carbon Composite Bipolar Plate for High-Temperature Proton Exchange Membrane Fuel Cells (HT-PEMFCs)," Journal of Power Sources, 327: p. 119-126, 2016
[12] Lee, D., et al., "Development of Non-Woven Carbon Felt Composite Bipolar Plates Using the Soft Layer Method," Composite Structures, 160: p. 976-982, 2017
[13] Adloo, A., et al., "High Performance Polymeric Bipolar Plate Based on Polypropylene/Graphite/Graphene/Nano-Carbon Black Composites for PEM FuelCells," Renewable Energy, 99: p. 867-874, 2016
[14] Bairan, A., et al., "Effect of Carbon Nanotubes Loading in Multifiller Polymer Composite as Bipolar Plate for PEM Fuel Cell," Procedia Chemistry, 19: p. 91-97, 2016.
[15] Jiang, B., et al., "Manufacturing andCharacterization of Bipolar Fuel Cell Plate with Textile Reinforced Polymer Composites," Materials & Design (1980-2015), 65: p. 1011-1020, 2015.
[16] Lim, J.W., M. Kim, and D.G. Lee, "Conductive Particles Embedded Carbon Composite Bipolar Plates for ProtonExchange Membrane Fuel Cells," Composite Structures, 2014. 108: p. 757-766, 2014.
[17] Maheshwari, P. H., Mathur R. B., Dhami T. L., "Fabrication of High Strength and a Low Weight Composite Bipolar Plate for Fuel Cell Applications," Journal of Power Sources, Vol. 173, No.1, pp. 394-403, 11/8/, 2007.
[18] Abdolahi, E.,"Experimental Analysis of Mechanical Behaviorof the CompositeBipolar Plates in Proton Exchange Membrane Fuel Cell" In Persian,. journals of.tabriz, No. 80, p149-458,2017.