[1] Cruz, P. L., “Experimental and Numerical Study on Bolted/Bonded Composite Joints for Aircraft,” Ph.D. Thesis, Carleton University, Canada, 2016.
[2] Da Silva, L. F. M., Ochsner, A. and Adams, R. D., “Handbook of Adhesion Technology,” Heidelberg, Springer, 2011.
[3] Lang, T. P. and Mallick, P. K., “Effect of Spew Geometry on Stresses in Single Lap Adhesive Joints,” International Journal of Adhesion & Adhesives, Vol. 18, pp. 167–177, 1998.
[4] Frostig, Y., Thomsen, O. T. and Mortensen, F., “Analysis of Adhesive-Bonded Joints Squareend and Spew-Fillet-High-Order Theory Approach,” Journal of Engineering Mechanics, Vol. 125, pp. 1289–1307, 1999.
[5] Belingardi, G., Goglio, L. and Tarditi, A., “Investigating the Effect of Spew and Chamfer Size on the Stresses in Metal/Plastics Adhesive Joints,” International Journal of Adhesion & Adhesives, Vol. 22, pp. 273–282, 2002.
[6] Da Silva, L. F. M. and Adams, R. D., “Adhesive Joints at High and Low Temperatures Using Similar and Dissimilar Adherends and Dual Adhesives,” International Journal of Adhesion & Adhesives, Vol. 27, pp. 216–226, 2007.
[7] Da Silva, L. F. M. and Adams, R. D., “Joint Strength Predictions for Adhesive Joints to be Used Over a Wide Temperature Range,” International Journal of Adhesion & Adhesives, Vol. 27, pp. 362–379, 2007.
[8] Adams, R. D. and Harris, J. A., “The Influence of Local Geometry on the Strength of Adhesive Joints,” International Journal of Adhesion & Adhesives, Vol. 7, pp. 69–80, 1987.
[9] Adams, R. D., Comyn, J. and Wake, W. C., “Strucutural Adhesive Joints in Engineering,” Chapman & Hall, London, 2nd edition, 1997.
[10] Zhao, X., Adams, R. D. and Da Silva, L. F. M., “Single Lap Joints with Rounded Adherend Corners: Experimental Results and Strength Predictions,” Journal of Adhesion Science and Technology, Vol. 25, pp. 837–856, 2011.
[11] Zhao, X., Adams, R. D. and Da Silva, L. F. M., “Single Lap Joints with Rounded Adherend Corners: Stress and Strain Analysis,” Journal of Adhesion Science and Technology, Vol. 25, pp. 819–836, 2011
[12] Rispler, A. R., Tong, L., Steven, G. P. and Wisnom, M. R., “Shape Optimisation of Adhesive Fillets,” International Journal of Adhesion & Adhesives, Vol. 20, pp. 221–231, 2000.
[13] Da Silva, L. F. M. and Adams, R. D., “Techniques to Reduce the Peel Stresses in Adhesive Joints with Composites,” International Journal of Adhesion & Adhesives, Vol. 27, pp. 227–35, 2000.
[14] Marques, E. A. S. and Da Silva, L. F. M., “Joint Strength Optimization of Adhesively Bonded Patches,” The Journal of Adhesion, Vol. 84, pp. 917–936, 2008.
[15] Jansen, B. J. P., Tamminga, K.Y., Meijer, H.E.H. and Lemstra, P.J., “Preparation of Thermoset Rubbery Epoxy Particles as Novel Toughening Modifiers for Glassy Epoxy Resins,” Polymer, Vol. 40, pp. 5601-5607, 1999.
[16] Kaji, M. R., Farahani, M. R. and Ansari, M., “Investigation on the Effects of the Number and Diameter of the Wires on the Strength of the Reinforced Adhesive Joint of Composites,” In Persian, Iranian Journal of Manufacturing Engineering, Vol. 2, No, 4, pp. 28-35, 2015.
[17] Khalili, S. M. R., Shokuhfar, A., Hoseini, S. D., Bidkhori, M. and Mittal, R. K., “Experimental Study of the Influence of Adhesive Reinforcement in Lap Joints for Composite Structures Subjected to Mechanical Loads,” International Journal of Adhesion & Adhesives, Vol. 28, pp. 436-444, 2008.
[18] Parkes, P. N., Butler, R., Meyer, J. and De Oliveira, A., “Static Strength of Metal-Composite Joints with Penetrative Reinforcement,” Composite Structures, Vol. 118, pp. 250-256, 2014.
[19] Shahrohkinasab, S., Sahraeeyan, R. and Sabet, A., “Assessment of Mixed Adhesive in Single lap and Peel Joint with Composite Substrate,” In Persian, Journal of Science and Technology of Composites, Vol. 4, No. 2, pp. 189-194, 2014.
[20] Marques, E. A. S., Magalhães D. N. M. and Da Silva, L. F. M., “Experimental Study of Silicone Epoxy Dual Adhesive Joints for High Temperature Aerospace Applications,” Mater-Wiss Werkstofftech, Vol. 42, pp. 471–477, 2011.
[21] Da Silva, L. F. M. and Lopes, M. J. C. Q., “Joint Strength Optimization by the Mixed-Adhesive Technique,” International Journal of Adhesion & Adhesion, Vol. 29, pp. 509–514, 2009.
[22] Kumar, S. and Pandey, P.C., “Behaviour of Bi-Adhesive Joints,” Journal of Adhesion Science and Technology, Vol. 24, pp. 1251–1281, 2010.
[23] Carbas, R. J. C., Da Silva, L. F. M. and Andrés, L. F. S., “Functionally Graded Adhesive Joints by Graded Mixing of Nanoparticles”, International Journal of Adhesion & Adhesives, Vol. 76, pp. 30–37, 2017.
[24] E Glass Woven Roving 200, Technical Data Sheet, AMP Composites, 2009.
[25] CWUTM 300, Carbon Wrap Unidirectional, Technical Data Sheet, AFZIR Composites, 2008.
[26] EPON™ Resin 828, Technical Data Sheet, Hexion, 2005.
[27] Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding, Annual Book of ASTM Standard, D 5868 – 01, 2001.
[28] R. J. C. Carbas, L. F. M. Da Silva, and L. F. S. Andrés, “Functionally Ggraded Adhesive Joints by Graded Mixing of Nanoparticles”, International Journal of Adhesion & Adhesives, Vol. 76, pp. 30–37, 2017.
[29] R. Breto, A. Chiminelli, E. Duvivier, M. Lizaranzu, and M. A. Jimenez, “Finite Element Analysis of Functionally Graded Bond-Lines for Metal/Composite Joints”, The Journal of Adhesion, Vol. 91, pp. 920–936, 2015.
[30] Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints, Annual Book of ASTM Standard, D 5573 – 99, 2005.