[1] Mishra, R. S., and Ma, Z. Y., “Friction stir welding and processing.” Materials science and engineering: R: reports, Vol. 50, No. 1-2, pp. 1-78, 2005.
[2] Węglowski, M. S., “Friction stir processing–State of the art,” Archives of civil and Mechanical Engineering, Vol. 18, No.1, pp. 114-129, 2018.
[3] El-Sayed, M. M., Shash, A. Y., Abd-Rabou, M., & ElSherbiny, M. G., “Welding and processing of metallic materials by using friction stir technique: A review,” Journal of Advanced Joining Processes, No. 3, pp. 100059, 2021.
[4] Khademi, A.R., and Afsari, A., “Fabrications of surface nanocomposite by friction stir processing to improve mechanical and microstructural properties of low carbon steel,” Transactions of the Indian Institute of Metals, Vol. 70, No.5, pp.1193-1198, 2017.
[5] Rabiezadeh, A., & Afsari, A, “Effect of nanoparticles addition on dissimilar joining of aluminum alloys by friction stir welding,” In Persian, Journal of Welding Science and Technology of Iran, Vol.4, No.2, pp. 23-34, 2019.
[6] Rabiezadeh, A., Afsari A., Bahmani A., and Sohrabizadeh S.,"Effects of friction stir processing on mechanical, tribological and corrosion resistance of low carbon steel." In Persian, Vol.48, No.3, pp.115-124, 2018.
[7] Rabiezadeh, A., and A. Afsari. "Effect of Strengthening Particles on Microstructure and Tribological Properties of Aluminum Based Nano-composites." In Persian, Nanomaterials, Vol. 8, No.25, pp. 1-10, 2016.
[8] Rabiezadeh, A., Afsari, A., Mohammadi M., “Production and investigation of properties of aluminum surface nanocomposite /carbon nanotube (Al-CNT) produced by friction-stir process,” In Persian, Journal of New Materials, Vol.3, No.2, pp. 13-23, 2012.
[9] Izadi, H. and Gerlich, A.P., “Distribution and stability of carbon nanotubes during multi-pass friction stir processing of carbon nanotube/aluminum composites”. Carbon, Vol. 50, No. 12, pp. 4744-4749. 2012.
[10] Rajakumar, S., Balasubramanian V., “Establishing relationships between mechanical properties of aluminum alloys and optimized friction stir welding process parameters,” Materials and Design, No. 40, pp.17-35. 2012.
[11] Zhang, Q., Xiao, B. L., Wang, Q. Z., & Ma, Z. Y., “In situ Al3Ti and Al2O3 nanoparticles reinforced Al composites produced by friction stir processing in an Al-TiO2 system.” Materials Letters, Vol. 65, No.13, pp. 2070-2072, 2011.
[12] Teo, G. S., Liew, K. W., & Kok, C. K., “A Study on Friction Stir Processing Parameters of Recycled AA 6063/TiO2 Surface Composites for Better Tribological Performance.” Metals, Vol. 12, No.6, pp. 973, 2022.
[13] Devaraju, A., Kumar A., Kotiveerachari B.,” Influence of rotational speed and reinforcements on wear and mechanical properties of aluminum hybrid compositest via friction stir processing.” Materials and Design, No.45, pp. 576-585, 2013.
[14] Rabiezadeh, A., and Afsari, A. "Production of Dispersed Ceramic Nano-Particles in Al Alloy Using Friction Stir Processing." Journal of Modern Processes in Manufacturing and Production, Vol.5, No. 3, pp. 41-57, 2016:
[15] Sadoun, A., Ibrahim, A., & Abdallah, A. W., “Fabrication and evaluation of tribological properties of Al2O3 coated Ag reinforced copper matrix nanocomposite by mechanical alloying.” Journal of Asian Ceramic Societies, Vol. 8, No.4, pp. 1228-1238, 2020.
[16] Devaraju, A., Kumar A., Kumaraswamy A, Kotiveerachari B.,” Influence of reinforcements (SiC and Al2O3) and rotational speed on wear and mechanical properties of aluminum alloy 6061-T6 based surface hybrid composites produced via friction stir processing.” Materials and Design, Vol. 51, pp.331-341. 2013.
[17] Yazdipour, A., and Dehghani, K., “Modeling the microstructural evolution and effect of cooling rate on the Nano-grains formed during the friction stir processing of Al5083.” Materials Science and Engineering: A, Vol. 527, No. 1-2, pp.192-197, 2009.
[18] Shadler, L. S., “Polymer based and polymer-filled nanocomposites’, Nanocomposites science and technology, Wiley-VCH Verlag GmbH & Co. KgaA, Weinheim, 2004
[19] Pradeep, P. Samuel Ratna Kumar, P. S., Lawrence D., Jayabal S., “Characterization of particulate reinforced aluminum 7075/Tib2 composites”, Int. J.of civil Eng. And Technology, Vol. 8, No.9, pp178-190, 2017