Document Type : Research Paper
Authors
1 MSc. Student, Department of Mechanical Engineering, K. N. Toosi University of Technology, Tehran, Iran.
2 Professor, Department of Mechanical Engineering, K. N. Toosi University of Technology, Tehran, Iran.
Abstract
In this research, the nonlinear free vibration analysis of functionally graded (FG) rectangular plate is investigated analytically using first order shear deformation theory (FSDT) for the first time. For this purpose, firstly, using Hamilton principle, the partial differential equations of motion are developed based on first order shear deformation theory (FSDT) and von Karman nonlinearity strain displacement relations. Afterward, by applying Galerkin method, the nonlinear partial differential equations are transformed into nonlinear ordinary differential equations. Then, using the modified Lindstedt-Poincare method, the nonlinear equation of transverse motion of the FG plate is solved analytically to determine nonlinear frequency ratio. The material properties of the plate are assumed to be graded continuously according to power law distribution in the thickness direction. The effects of some key system parameters such as vibration amplitude, volume fraction index and aspect ratio on the nonlinear natural frequency ratio to linear natural frequency are discussed. To validate the analysis, the results of this study are compared with the results of previously published papers and numerical solution and good agreement has been observed.
Keywords
- Nonlinear vibrations
- Rectangular plate
- Functionally graded materials
- First order shear deformation theory
- modified Lindstedt-Poincare method
Main Subjects
[2] Khorshidi, K., Asgari, T., & Fallah, A. “Free vibrations analysis of functionally graded rectangular nano-plates based on nonlocal exponential shear deformation theory,” Mechanics of Advanced Composite Structures, Vol. 2, No. 2, pp. 79- 93, 2015.
[3] Khorshidi, K., & Bakhsheshy, A. “Free vibration analysis of a functionally graded rectangular plate in contact with a bounded fluid,” Acta Mechanica, Vol. 226, No. 10, pp. 3401-3423, 2015.
[4] Zhang, D.G. and Zhou, Y.H., “A theoretical analysis of FGM thin plates based on physical neutral surface,” Computational Materials Science, Vol. 44, No. 2, pp. 716–720, 2008.
[5] Abrate, S., “Functionally graded plates behave like homogeneous plates,” Composites Part B: Engineering, Vol. 39, No. 1, pp. 151–158, 2008.
[8] Hosseini Hashemi, SH., Akhavan and Fadaee, M. “Exact closed-form free vibration analysis of moderately thick rectangular functionally graded plates with two bonded piezoelectric layers,” In Persian, Journal of Modares mechanical engineering, Vol. 11, No. 3, pp. 57-74, 2012.
[9] Abbasi, M., Najafizadeh, S.S.M. and Nezamabadi, A., “Vibration of two-dimensional functionally graded plate based on first-order shear deformation theory” International Conference on New Research Findings in Industrial Engineering and Mechanical Engineering, Tehran, Nikan Institute of Higher Education, 2015.
[10] Azimiaraghi, S., Najafizadeh, S.M.M. and Nezamabadi, A., “Vibration of two-dimensional functionally graded plate based on third-order shear deformation theory” International Conference on New Research Findings in Industrial Engineering and Mechanical Engineering, Tehran, Nikan Institute of Higher Education, 2015.
[11] Hosseini-Hashemi, S., Taher, H.R.,, Akhavan, H., and Omidi, M., “Free vibration of functionally graded rectangular plates using first-order shear deformation plate theory,” Applied Mathematical Modelling, Vol. 34, No. 5, pp. 1276–1291, 2010.
[12] Zhao, X., Lee, Y.Y. and Liew K.M., “Free vibration analysis of functionally graded plates using the element-free kp-Ritz method,” Journal of sound and Vibration, Vol. 319, No. 3-5, pp. 918–939, 2009.
[13] Yang, J. and Shen, H.S., “Vibration characteristics and transient response of shear-deformable functionally graded plates in thermal environments,” Journal of Sound and Vibration, Vol. 255, No. 3, pp. 579–602, 2002.
[14] Gupta, A., Talha, M. and Singh, B.N., “Vibration characteristics of functionally graded material plate with various boundary constraints using higher order shear deformation theory,” Composites Part B: Engineering, Vol. 94, No. 1, pp. 64–74, 2016.
[15] Ghaheri, A. and Nosier, A., “Nonlinear forced vibrations of thin circular functionally graded plates,” In Persian, Journal of Science and Technology of Composite, Vol. 1, No. 2, pp. 1- 10, 2015.
[16] Khosravian, N., Tavakolpour, A., Roozegar, S. and Roozegar, J. “Dynamic simulation of nonlinear vibration of square plate with large displacement,” First National Conference on Mechanical and Mechatronics Engineering of Iran, Shahrekord, Islamic Azad University, Shahrekord Branch, 2016.
[17] Wang, Y.Q. and Zu, J.W., “Large-amplitude vibration of sigmoid functionally graded thin plates with porosities,” Thin-Walled Structures, Vol. 119, No. 1, pp. 911–924, 2017.
[18] Yazdi, A.A ., “Homotopy perturbation method for nonlinear vibration analysis of functionally graded plate,” Journal of Vibration and Acoustics, Vol. 135, No. 2, pp. 12–21, 2013.
[19] Lotfavar, A., Rafiei Pour, H., Hamze Shalamdari, S. and Mohammadi, T., “Nonlinear vibration analysis of laminated composite plates using approximate and analytical methods,”, In Persian, Iranian society of mechanical engineering, Vol. 1, No. 17, pp. 16- 39, 2015.
[20] Woo, J ., Meguid S.A . and Ong L.S., “Nonlinear free vibration behavior of functionally graded plates,” Journal of Sound and Vibration, Vol. 289, No. 3, pp. 595–611, 2006.
[21] Malekzadeh, P. and Monajjemzadeh S.M., “Nonlinear response of functionally graded plates under moving load,” Thin-Walled Structures, Vol. 96, No. 1, pp. 120–129, 2015.
[22] Duc, N.D. and Cong, P.H, “Nonlinear vibration of thick FGM plates on elastic foundation subjected to thermal and mechanical loads using the first-order shear deformation plate theory,” Cogent Engineering, Vol. 2, No. 1, pp. 1045222, 2015.
[23] Fung, C.P. and Chen, C.S., “Imperfection sensitivity in the nonlinear vibration of functionally graded plates,” European Journal of Mechanics-A/Solids, Vol. 25, No. 3, pp 425–461, 2006.
[24] Fakhari, V., Ohadi and A., Yousefian, P., “Nonlinear free and forced vibration behaviour of functionally graded plate with piezoelectric layers in thermal environment,” Composite Structures, 93 (2011) 2310–2321.
[25] Hao, Y.X., Zhang W., and Yang J., “Nonlinear oscillation of a cantilever FGM rectangular plate based on third-order plate theory and asymptotic perturbation method,” Composites Part B: Engineering, Vol. 42, No. 3, pp 402–413, 2011.
[26] Zhang, W., Hao, Y., Guo, X. and Chen, L., “Complicated nonlinear responses of a simply supported FGM rectangular plate under combined parametric and external excitations,” Meccanica, Vol. 47, No. 4, pp 985–1014, 2012.
[27] Dinh Duc, N., Tuan, N.D., Tran, P. and Quan, T.Q., “Nonlinear dynamic response and vibration of imperfect shear deformable functionally graded plates subjected to blast and thermal loads,” Mechanics of Advanced Materials and Structures, Vol. 24, No. 4, pp 318-329, 2017.
[28] Reddy JN, “Mechanics of laminated composite plates and shells: theory and analysis,” CRC press, 2004.
[29] Chia CY, “Nonlinear analysis of plates,” McGraw-Hill International, Book Company, 1980.
[30] Nayfeh, A.H. and Mook, D.T., “Nonlinear oscillation,” John Wiley & Sons, Inc, 1995.
[31] He, J.H., “Modified Lindstedt–Poincare methods for some strongly non-linear oscillations: Part I: expansion of a constant,” International Journal of Non-Linear Mechanics, Vol. 37, No. 2, pp 309-314, 2002.
)