[1] Miller, W. S., Zhuang, L., Bottema, J., Wittebrood, A. J., Smet, P. D., Haszler, A., “Recent Development in Aluminium Alloys for the Automotive Industry,” Mater Sci Eng A, Vol. 280, pp. 37–49, 2000.
[2] Smerd, R., Winkler, S., Salisbury, C., Worswick, M., Lloyd, D., Finn, M., “High Strain Rate Tensile Testing of Automotive Aluminum Alloy Sheet,” Int J Impact Eng, Vol. 32, pp. 541–560, 2005.
[3] Rodr´ıguez-Mill´an, M., Vaz-Romero, A., Rusinek, A., Rodríguez-Martínez, J. A., Arias, A., “Experimental Study on the Perforation Process of 5754-H111 and 6082-T6 Aluminium Plates Subjected to Normal Impact by Conical, Hemispherical and Blunt Projectiles,” Exp. Mech., Vol. 54,
No. 1, pp. 729–742, 2014.
[4] Corran, R. S. J., Shadbolt, P. J., Ruiz, C., “Impact Loading of Plates –an Experimental Investigation,” Int J lmpact Eng, Vol. 1, pp. 13–22, 2009.
[5] Fagerholt, E., Grytten, F., Gihleengen, B. E., Langseth, M., Børvik, T., “Continuous Out-of-Plane Deformation Measurements of AA5083-H116 Plates Subjected to Low-Velocity Impact Loading,” Int J Mech Sci, Vol. 52, pp. 689–705, 2010.
[6] Mohotti, D., Ngo, T., Mendis, P., Raman, S. N., “Polyurea Coated Composite Aluminium Plates Subjected to High Velocity Projectile Impact,” Int J Mater Des, Vol. 52, pp. 1–16, 2013.
[7] Iqbal, M. A., Khan, S. H., Ansari, R., Gupta, N. K., “Experimental and Numerical Studies of Double Nosed Projectile Impact on Aluminum Plates,” Int J lmpact Eng, Vol. 54, pp. 232–45, 2013.
[8] Antoinat, L., Kubler, R., Barou, J. L., Viot, P., Barrallier, L., “Perforation of Aluminium Alloy Thin Plates,” Int J Impact Eng, Vol. 75, pp. 255–67, 2015.
[9] Børvik, T., Langseth, M., Hopperstad, O. S. S., Malo, K. A., Berstad, T., “Perforation of 12 mm Tthick Steel Plates by 20 mm Diameter Projectiles with Flat, Hemispherical and Conical Noses Part II: Numerical Simulations,” Int. J. Impact Eng, Vol. 27, pp. 37–64, 2002.
[10] Børvik, T., Hopperstad, O. S., Langseth, M., Malo, K. A., “Effect of Target Thickness in Blunt Projectile Penetration of Weldox 460 E Steel Plates,” Int. J. Impact Eng, Vol. 28 (4), pp. 413–464, 2003.
[11] Børvik, T., Clausen, A. H., Hopperstad, O. S., Langseth, M., “Perforation of AA5083-H116 Aluminium Plates with Conical-Nose Steel Projectiles—Experimental Study,” Int. J. Impact Eng, Vol. 30 (4), pp. 367–384, 2004.
[12] Gupta, N. K., Madhu, V., “Normal and Oblique Impact of Kinetic Energy Projectile on Mild Steel Plates,” Int. J. Impact Eng, Vol. 12 (3), pp. 333–343, 1992.
[13] Gupta, N. K., Iqbal, M. A., Sekhon, G. S., “Experimental and Numerical Studies on the Behavior of Thin Aluminum Plates Subjected to Impact by Blunt- and Hemispherical-Nosed Projectiles,” Int. J. Impact Eng, Vol. 32 (12), pp. 1921–1944, 2006.
[14] Rodriguez-Millan, M., Garcia-Gonzalez, D., Rusinek, A., Abed, F., Arias, A., “Perforation Mechanics of 2024 Aluminum Protective Plates Subjected to Impact by Different Nose Shapes of Projectiles,” Thin-Walled Struct, Vol. 123, pp. 1–10, 2018.
[15] Taghipoor, H., Malekzade Fard, K., Bigdeli, A., “Experimental, Numerical and Analytical Study of Energy Absorption in High Velocity Penetration Phenomena on Composite Targets”, In Persian, Journal of Science and Technology of Composites, Vol. 5, No. 1, pp. 12-24, 2018.
[16] Alemi Ardakani, E., Kalantar, M., Mosallaee Pour, M., Ghasemi Banad Kouki, S. S., “Production and Characterization of in-situ Al-Mn-Al2O3 Composite Produced in Al-MnO2 System”, In Persian, Journal of Science and Technology of Composites, Vol. 3, No. 3, pp. 277-284, 2016.
[17] Khademian, M., Saeedi Heydari, M., Alizadeh, A., Baharvandi, H. R., “Investigation the Effect of Hot Rolling Process on Properties and Microstructure of Al-B4C Composite by Vorte,” In Persian, Modares Mechanical Engineering, Vol. 14, pp. 140-146, 2014.
[18] Onoro, J., Salvador, M., Cambronero, L., “High-Temperature Mechanical Properties of Aluminium Alloys Reinforced with Boron Carbide Particles,” Mater. Sci. Eng. A, Vol. 499, pp. 421-426, 2009.
[19] Yazdani, A., Salahinejad, E., “Evolution of Reinforcement Distribution in Al–B4C Composites During Accumulative Roll Bonding,” Materials & Design, Vol. 32, No. 6, pp. 3137-3142, 2011.
[20] Lee, Y. S., Wetzel, E. D., Egres, R. G., Wagner, N. J., “Advanced Body Armor Utilizing Shear Thickening Fluids,” 23rd Army Science Conference, Orlando, pp. 29-40, 2002.
[21] Sun, L., Gibson, R. F., Gordaninejad, F., Suhr, J., “Energy Absorption Capability of Nanocomposites: A Review,” Compos. Sci. Technol., Vol. 69, pp. 2392–2409, 2009.
[22] Sinmazçelik, T., Avcu, E., Bora, M. Ö., Çoban, O., “A Review: Fibre Metal Laminates, Background, Bonding Types and Applied Test Methods,” Materials & Design, Vol. 32, No. 7, pp. 3671-3685, 2011.
[23] Parhizkar, M., Vaziri, A., “Study of Mechanical and Ballistic Properties of Nano Armor”, In Persian, Iranian Journal of Mechanical Engineering, Vol. 23, No. 99, pp. 62-73, 2014.
[24] Geim, A. K., Novoselov, K. S., “The Rise of Graphene”, Nature Materials, Vol. 6, No. 3, pp. 183-191, 2007.
[25] Kim, H., Abdala, A. A., Macosko, C. W., “Graphene/Polymer Nanocomposites”, Macromolecules, Vol. 43, No. 6, pp. 6515-6530, 2010.
[26] Kalaitzidou, K., Fukushima, H., Drzal, L. T., “Mechanical Properties and Morphological Characterization of Exfoliated Graphite–Polypropylene Nanocomposites”, Compos. Part A Appl. Sci. Manuf., Vol. 38, No. 7, pp. 1675-1682, 2007.
[27] Shokrieh, M. M., Ahmadi Joneidi, V., “Manufacturing and Experimental Characterization of Graphene/Polypropylene Nanocomposites”, In Persian, Modares Mechanical Engineering, Vol. 13, No. 11, pp. 55-63, 2014.
[28] Zarei Darani, S., Naghdabadi, R., Jokar, E., Irajizad, A., “Experimental Study on Mechanical Properties of Graphene Oxide/Epoxy Nanocomposites in Different Strain rates,” In Persian, Modares Mechanical Engineering, Vol. 16, No. 12, pp. 61-66, 2016.
[29] Khansari, M., Khodarahmi, H., Vaziri, A., “Experimental Study of Ballistic Properties of Hybrid Aluminum and Epoxy Matrix Composite Reinforced with Carbon Nanotube,” In Persian, Modares Mechanical Engineering, Vol. 17, No. 8, pp. 126-132, 2017.
[30] Shin, S. E., Choi, H. J., Shin, J. H., Bae, D. H., “Strengthening Behavior of Few-Layered Graphene/Aluminum Composites,” Carbon, Vol. 82, pp. 143-151, 2015.
[31] Milliere, C., Suery, M., “Fabrication and Properties of Metal Matrix Composites Based on SiC Reinforcement Reinforced Aluminum Alloys,” Mater. Sci. Technol. Vol. 4, pp. 41-51, 2013.
[32] Tabesh, A. Ebrahimi, Gh.and Ezatpour, H.R., “The Investigation and Comparison of Mechanical Properties and Microstructure Al/CNT and Al/CNT/Al2O3 Composites Produced by Mixed Accumulative Roll Bounding ”, In Persian, Journal of Science and Technology of Composites, Vol. 4, No. 4, pp. 464-470, 2018.
[33] Zukas, J. A., Nicholas, R., Swift, H. F., Greszczuk, L. B., Curran, D. R., “Impact Dynamics,” John Wiley & Sons, New York, chapter 5, 1982.
[34] Raguramana, M., Debb, A., Gupta, N. K., “Semi-Empirical Procedures for Estimation of Residual Velocity and Ballistic Limit for Impact on Mild Steel Plates by Projectiles,” Lat. Am. J. Solids Struct., Vol. 7, pp. 63–76, 2010.
[35] Khoramishad, H., Khodaei, M. and Bagheri Tofighi, M., “Sensitivity of the Impact Behavior of Multi-layered Metal Laminates to the Position of Material Parameters Variations”, in Persian, Journal of Science and Technology of Composites, Vol. 1, No. 1, pp. 23-34, 2014.
[36] Nouri Niyaraki, M., Ashenai Ghasemi, F., Ghasemi, I., and Daneshpayeh, S., “Experimental Analysis of Graphene Nanoparticles and Glass Fibers Effect on Mechanical and Thermal Properties of Polypropylene/EPDM Based Nanocomposites”, In Persian, Journal of Science and Technology of Composites, Vol. 5, No. 2, pp. 169-176, 2018.
[37] Kazemi khasrag, E. Siadati, M.H. and Eslami-Farsani, R., “Effect of Surface Modification of Graphene Nanoplatelets on the High Velocity Impact Behavior of Basalt Fibers Reinforced Polymer-Based Composites”, In Persian, Journal of Science and Technology of Composites, Vol. 5, No. 1, pp. 109-116, 2018.
)