[1] Abrate, H., “Impact on Composite Structures,” Cambridge (UK): Cambridge University Press, 1998.
[2] Matthews, F. L., “Finite Element Modelling of Composite Materials and Structures,” Taylor & Francis, 2000.
[3] Tan, S. C., “A Progressive Failure Model for Composite Laminates Containing Openings,” Journal of composite material, Vol. 25, No. 5 pp. 556–577, 1991.
[4] Chang, F. K., “A Progressive Damage Model for Laminated Composites Containing Stress Concentrations,” Journal of Composite Materials, Vol. 21, No. 9, pp. 834–855, 1987.
[5] Camanho, P. P. and Davila, C.G., “Mixed-Mode Decohesion Finite Elements For The Simulation Of Delamination In Composite Material,” NASA-Technical paper, Vol. 211737, No. 1, pp. 1-37, 2002.
[6] Kachanov, L. M., ” Introduction to Continuum Damage Mechanics,” Boston: Martinus Nijhoff Publsihers, 1987.
[7] Lemaitre, J. and Chaboche, J. L., “Mechanics of Solid Materials,” Cambridge: Cambridge University Press, 1990.
[8] Iannucci, L., Dechaene, R. Willows, M. and Degrieck, J., “A Failure Model for the Analysis of Thin Woven Glass Composite Structures Under Impact Loadings,” Computers and Structures, Vol. 79, No. 8, pp. 785–99, 2001.
[9] Donadon, M. V. Iannucci, L. Falzon, B.G. Hodgkinson, J. M. and Almeida, S. F. M., “ A Progressive Failure Model for Composite Laminates Subjected to Low Velocity Impact Damage,”
Computers & Structures; Vol. 86, No. 11, pp.1232–1252, 2008.
[10] Zhang, Y. and Zhu, P., “Finite Element Analysis of Low-velocity Impact Damage in Composite Laminated Plates,” Materials & Design, Vol. 27, No. 6, pp. 513–519, 2006.
[11] Hashin, Z., “ Failure Criteria For Unidirectional Fiber Composites,” Journal of Applied Mechanics, Vol. 47, No. 2, pp. 329–334, 1980.
[12] Lapczyk, I. and Hurtado, U. A., “Progressive Damage Modeling in Fiber-Reinforced Materials,” Composites: Part A , Vol. 38, No. 11, pp. 2333–2341, 2007.
[13]Torabizadeh, M. A. Shokrieh, M. M. and Fereidoon, A., “Progressive Damage Modeling Of Glass/Epoxy Laminated Composites Under Static Load At Low Temperature,” In Persian, Journal of Modeling in Engineering, Vol. 8, No. 21, pp. 33-43, 2010.
[14] Hassanifard, S. and Feyzi, M., “Progressive Damage Investigation of Glass-Epoxy Composite Laminates under Fatigue Loading ” In Persian, Modares Mechanical Engineering,, Vol. 15, No. 4, pp. 339-347, 2015.
[15]Shokrieh, M. M. Ghajar, M. Salamattalab, M. and Madoliat, R., “Progressive Damage Modeling of Laminated Composites by ConsideringSimultaneous Effects of Interlaminar and Intralaminar DamageMechanisms,” In Persian, Journal of Science and Technology of Composites, Vol. 2, No. 2, pp. 1-8, 2015.
[16] Guo, W. Xue, P. and Yang, J., “Nonlinear Progressive Damage Model for Composite Laminates Used For Low-velocity Impact,” Applied Mathematics and Mechanics, Vol. 34, No. 9, pp. 1145-1154, 2013.
[17] Singh, H. Namala, K. K. and Mahanjan, P., “A Damage Evolution Study of Eglass/epoxy Composite Under Low Velocity Impact,” Composites Part B: engineering, Vol. 76, pp. 235–248, 2015.
[18] Lee, C.S. Kim, J.H. Kim, S. Ryu, D.M. and Lee, J. M., “Initial and Progressive Failure Analyses for Composite Laminates Using Puck Failure Criterion and Damage-coupled Finite Element Method,” Composite Structures, Vol. 121, pp. 406–419, 2015.
[19] Xin, S.H. and Wen, H.M., “A Progressive Damage Model for Fiber Reinforced Plastic Composites Subjected to Impact Loading,“ International Journal of Impact Engineering, Vol. 75, pp. 40-52, 2015.
[20] Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials, ASTM International, D3039/D3039M-08, West Conshohocken, PA, 2008.
[21] Namala, K. K. Mahajan, P. and Bhatnagar, N., “Digital image Correlation of Low-velocity Impact on a Glass/epoxy Composite,” International Journal for Computational Methods in Engineering Science and Mechanics, Vol.7, No. 3-4, pp. 203-217, 2014