[1] Nerilli, F. Marino, M. and Vairo, G., “A Numerical Failure Analysis of Multi-Bolted Joints in FRP Laminates Based on Basalt Fibers,” Procedia Engineering, Vol. 109, pp. 492-506, 2015.
[2] Khalili, S. M. R. Daghigh, V. and Farsani, R. E., “Mechanical Behavior of Basalt Fiber-Reinforced and Basalt Fiber Metal Laminate Composites Under Tensile and Bending Loads,” Journal of Reinforced Plastics and Composites, Vol. 30, No. 8, pp. 647-659, 2011.
[3] Mostafa, N. H. Ismarrubie, Z. N. Sapuan, S. M. and Sultan, M. T. H., “Effect of Fabric Biaxial Prestress on the Fatigue of Woven E-Glass/Polyester Composites,” Materials and Design, Vol. 92, pp. 579-589, 2016.
[4] Wang, X. Song, L. Pornwannchai, W. Hu, Y. and Kandola, B., “ The Effect of Graphene Presence in Flame Retarded Epoxy Resin Matrix on the Mechanical and Flammability Properties of Glass Fiber-Reinforced Composites,” Composites Part A: Applied Science and Manufacturing, Vol. 53, pp.88-96, 2013.
[5] Subagia, I. D. G. A. Tijing, L. D. Kim, Y. Kim, C. S. Vista IV, F. P. and Shon, H. K., “Mechanical Performance of Multiscale Basalt Fiber–Epoxy Laminates Containing Tourmaline Micro/Nano Particles,” Composites: Part B, Vol. 58, pp. 611-617, 2014.
[6] Manikandan, V. Jappes, J. T. W. Kumar, S. M. S. and Amuthakkannan, P., “Investigation of the Effect of Surface Modifications on the Mechanical Properties of Basalt Fibre Reinforced Polymer Composites,” Composites Part B: Engineering, Vol. 43, No. 2, pp. 812-818, 2012.
[7] Khosravi, H. and Eslami-Farsani, R., “An Experimental Investigation Into The Effect Of Surface-Modified Silica Nanoparticles On The Mechanical Behavior Of E-Glass/Epoxy Grid Composite Panels Under Transverse Loading”, In Persian, Journal of Science and Technology of Composites, 2015, First online published.
[8] Khosravi, H. and Eslami-Farsani, R., “On The Mechanical Characterizations Of Unidirectional Basalt Fiber/Epoxy Laminated Composites With 3-Glycidoxypropyltrimethoxysilane Functionalized Multi-Walled Carbon Nanotubes-Enhanced Matrix,” Journal of Reinforced Plastics and Composites, 2015; Online published, DOI: 10.1177/0731684415619493.
[9] Shokrieh, M. M. Saeedi, A. and Chitsazzadeh, M., “Evaluating the Effects of Multi-Walled Carbon Nanotubes on the Mechanical Properties of Chopped Strand Mat/Polyester Composites,” Materials & Design, Vol. 56, pp. 274-279, 2014.
[10] Qiu, j. Zhang, C. Wang, B. and Liang, R., “Carbon Nanotube Integrated Multifunctional Multiscale Composites,” Nanotechnology, Vol. 18, No. 27, pp. 1-11, 2007.
[11] Zainuddin, S. Fahim, A. Arifin, T. Hosur, M.V. Rahman, M.M. Tyson, J.D. and Jeelani, S., “Optimization of Mechanical and Thermo-Mechanical Properties of Epoxy and E-Glass/Epoxy Composites Using NH2-MWCNTs, Acetone Solvent and Combined Dispersion Methods,” Composite Structures, Vol. 110, pp. 39–50, 2014.
[12] Wan Dalina, W.A.D. Mariatti, M. Ramlee, R. Mohd Ishak, Z. A. and Mohamed, A. R., “Comparison on the Properties of Glass Fiber/ MWCNT/ Epoxy and Carbon Fiber/ MWCNT/ Epoxy Composites,” Advanced Materials Research, Vol. 858, pp. 32-39, 2014.
[13] Zhang, J. Jua, S. Jiang, D. and Peng, H. X., “Reducing Dispersity of Mechanical Properties of Carbon Fiber/Epoxy Composites by Introducing Multi-Walled Carbon Nanotubes,” Composites,Part B, Vol. 54, pp. 371–376, 2013.
[14] Inam, F. Wong, D. W. Y. Kuwata, M. and Peijs, T., “Multiscale HybridMicro-Nanocomposites Based on Carbon Nanotubes and Carbon Fibers" Journal of Nanomaterials,” Vol. 2010, pp. 1-12, 2010.
[15] Kim, M. T. and Rhee, K. Y., “Flexural Behavior of Carbon Nanotube-Modified Epoxy/Basalt Composites,” Carbon Letters, Vol. 12, No. 3, pp. 177-179, 2011.
[16] Kim, M. T. Rhee, K. Y. Park, S. J. and Hui, D., “Effects of Silane-Modified Carbon Nanotubes on Flexural and Fracture Behaviors of Carbon Nanotube-Modified Epoxy/Basalt Composites,” Composites, Part B, Vol. 43, No. 5, pp. 2298–2302, 2012.
[17] Standard Test Methods for Flexural Properties of Un-reinforced and Reinforced Plastics and Electrical Insulating Materials, Annual Book of ASTM Standard, 08. 01, D 790 – 00, 2000.
[18] Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials, Annual Book of ASTM Standard, 08. 01, D3039/D3039M-00, 2002.
[19] Jen, Y. M. and Huang, C. Y., “Fatigue Characterization Of Acidtreated Carbon Nanotube/Epoxy Composites”, Journal of Composite Materials, Vol. 47, pp. 1665–1675, 2013.
[20] Brancato, V. Visco, A. A. and Pistone, A., “Effect Of Functional Groups On Multi-Walled Carbon Nanotubes On The Mechanical, Thermal And Electrical Performance Of Epoxy Resin Based Nanocomposites”, Journal of Composite Materials, Vol. 47, pp. 3091–3103, 2013.
[21] Tee, Y. B. Talib, R. A., and Abdan, K., “Thermally Grafting Aminosilane Onto Kenaf-Derived Cellulose And Its Influence On The Thermal Properties Of Poly (Lactic Acid) Composites”,. BioResources, Vol. 8, pp. 4468–4483, 2013.
[22] Rahman, M. M. Zainuddin, S. Hosur, M. V. Malone, J. E. Salam, M. B. A. Kumar, A. and Jeelani, S., “Improvements in Mechanical and Thermo-Mechanical Properties of E-Glass/Epoxy Composites Using Amino Functionalized MWCNTs,” Composite Structures, Vol. 94, No. 8, pp. 2397–2406, 2012.
[23] Brancato, V. Visco, A. M. and Pistone, A. “Effect Of Functional Groups Of Multi-Walled Carbon Nanotubes On The Mechanical, Thermal And Electrical Performance Of Epoxy Resin Based Nanocomposites”, Journal of Composite Materials, Vol. 47, pp.: 3091–3103, 2013..
[24] Seshadri, M. and Saigal, S., “Crack Bridging in Polymer Nanocomposites,” Journal of Engineering Mechanics, Vol. 133, No. 8, pp. 911-918, 2007.
[25] Eslami-Farsani, R. Khalili, S. M. R. Hedayatnasab, Z. and Soleimani, N., “Influence of Thermal Conditions on the Tensile Properties of Basalt Fiber Reinforced Polypropylene-Clay Nanocomposites”, Materials and Design, Vol. 53, pp. 540-549, 2014.