[1] Buytoz, S. and Yildirim, M., "Microstructural and microhardness characterstics of gas tungsten arc synthesized Fe-Cr-C coating on AISI 4340", Materials Letters, Vol. 59, pp. 607-614, 2005.
[2] Udhayabanu, V. and Ravi, K. R., "Synthesis of in-situ NiAl-Al2O3 nanocomposite by reactive milling and subsequent heat treatment", Intermetallics, Vol. 18, pp. 353-358, 2010.
[3] Madadi, F. Ashrafizadeh, F. and Shamanian, M., "Optimization of pulsed TIG cladding process of stellite alloy on carbon steel using RSM", Journal of Alloy and Compounds, Vol. 510, pp. 71-77, 2012.
[4] Chen, Y. C., " Reinforcements affect mechanical properties and wear haviors of WC clad layer by gas tungsten arc welding" Materials and Design, Vol. 45, pp. 6-14, 2013.
[5] Lin, Y. C. and Chen, H. M., "Analysis of microstructure and wear performance of SiC clad layer on SKD61 die steel after gas tungsten arc welding", Materials and Design, Vol. 47, pp. 828-835, 2013.
[6] Buytoz, S. and Ulutan, M., "In situ synthesis of SiC reinforced MMC surface on AISI 304 stainless steel by TIG surface alloying", Surface & Coatings Technology, Vol. 200, pp. 3698-3704, 2006.
[7] Lin, Y. C., "Microstructure and tribological performance of Ti-6Al-4V cladding with SiC powder", Surface & Coatings Technology, Vol. 205, pp. 5400-5405, 2011.
[8] Nuri Celik, O. and Ulutun, M., "Effects of graphite content on the microstructure and wear properties of an AISI 8620 steel surface modified bytungsten inert gas (TIG)", Surface & Coatings Technology, Vol. 206, pp. 1423- 1429, 2011.
[9] ASTM A-106. Standard specification for seamless carbon steel pipe for high temperature service. USA: ASTM International, 2011.
[10] Tavares, S. S. M. and Pardal, J. M., "Failure of ASTM A-106 Gr.B tube by creep and erosive wear", Engineering Failure Analyses, Vol. 26, pp. 337-343, 2012.
[11] Lippold, J. and Koteecki, D., "Welding metalurgy and weld ability of stanless stells", John Wiley & Sons, New York, 2007.
[12] Buytoz, S., "Microstructural properties of SiC based hardfacing on low alloy steel" Surface & Coatings Technology, Vol. 200, pp. 3734-3742, 2006.
[13] Sindo, K., Welding Metallurgy,1987.
[14] Buchely, M. F. and Gutierrez, J. C., "The effect of microstructure on abrasive wear of hardfacing alloys", Wear, Vol. 259, pp. 52-61, 2005.
[15] Kia Jamali, N., "Increasing the wear resistance of the surface layer by Friction Stir Process (FSP) on aluminum alloy" In Persian, Fifth Joint Conference of Iranian Metallurgical Engineers Society, 2012.
[16] Majumdar, J., "Studies on compositionally graded silicon carbide dispersed composite surface on mild steel developed by laser surface cladding", Vol. 203, pp. 505-512, 2008.
[17] Yang, R. and Liu, Z., "Study of in-situ synthesis TiCp/Ti composite coating on alloy Ti6Al4V by TIG cladding", Vol. 36, pp. 349-354, 2012.
[18] Lin, Y. C., "Elucidating the microstiucture and wear behavior of tungsten carbide", Journal of Materials Processing Technology, Vol. 210, pp. 219-225, 2010.
[19] Amini, K. and Akhbarizadeh, A., "Investigating the effect of the quench environment on the final microstructure and wear behavior of 1.2080 tool steel after deepcryogenic heat treatment", Materials and design, Vol. 45, pp. 316-322, 2013.