[1] McMahon, P.E., “Thermoplastic carbon fibre composites”, Developments in Reinforced Plastics 4, pp. 1-30, 1984.
[2] Cogswell, F.N., “Continuous fibre reinforced thermoplastics. in Mechanical Properties of Reinforced Thermoplastics edited by D.W”, Clegg and A.A. Collyer. Elsevier Applied Science Publishers, London, 1986.
[3] Cattanach, J.B. Cuff, G. and Cogswell, F.N., “The processing of thermoplastics containing high loadings of long and continuous reinforcing fibres”, J Polym Engng ,Vol. 6, pp. 345-362, 1986.
[4] Leach, D.C., “Continuous fibre reinforced thermoplastics matrix composites. in Aduanced Composites edited by I.K. Partridge”, Elsevier Applied Science Publishers, London, 1989.
[5] Quinn, J.A., Pultrusion: an economic manufacturing technique. Metals and Materials, Vol. 5, pp 270-273, 1989.
[6] Chandler, H.W. Devlin, B.J. and Gibson, A.G.: A model for the continuous impregnation of fibre tows in a resin bath with pins. Plastics, Rubber and Composites Processing and Applications, pp 215-220, 1992.
[7] Bijsterbosch, H. and Gaymans, R.J., “Impregnation of glass rovings with a polyamide melt. Part 1: Impregnation bath”, Composites Manufacturing, Vol. 2, 1993.
[8] Bijsterbosch, H. and Gaymans, R.J., “Impregnation of glass rovings with a polyamide melt. Part 2: Wipe-off die”, Composites Manufacturing, Vol. 3, 1993.
[9] Beever, W.H. and O’Connor, J.E., “Pultruded Thermoplastic Composite Structures”, Int.SAMPE Symp. Proc, Vol. 32, 1309,1987.
[10] FANUCCI, J.P. and NOLET, S.C., “Fiber Reinforced Nylon-6 Composites Produced by the Reaction Injection Pultrusion Process”, Polimer Composite, Vol. 77, no. 5, OCTOBER 1996.
[11] Kulshreshtha, A.K. Vasile, C., “Handbook of Polymer Blends and Composites”, Rapra technology limited. Vol. 2, 2001.
[12] Michaeli, W. and Jürss, D., “Composites Part A: Applied Science and Manufacturing”, 1996.
[13] Akovali, G., “Handbook of Composite Fabrication”, Ankara , pp134-136, 5 June 2001.
[14] Mazumdar, S.K.: “Composites Manufacturing”, Crc Press, pp 223 and 224, 2001.
[15] Wilson, M.L. and Buckley, J.D., Journal of Reinforced Plastics and Composites,1994.
[16] Bates, P. J., “Melt impregnation of glass roving in a thermoplastic”, Chemical Engineering Department McGill University, Montréal, March, pp. 15, 1993.
[17] Gibson, A.G. and Manson, J.A., “Impregnation technology for thermoplastic matrix composites”, Composites Manufacturing, Vol. 3, No. 4, pp. 223–233, 1992.
[18] Gaymans, R. J. and Wevers, E., “Impregnation of a glass fibre roving with a polypropylene melt in a pin assisted process”, Elsevier Science Limited, Composites Part A 29A, pp 633-670, 1998.
[19] Tutunchi, M. golzar, M. and behravesh, A.H., Study of parameters, involved in the production of impregnated glass fiber composite and high-density polyethylene to Pultrusion method, 7th student conferrence on mechanical engineering, University of tehran, 2013, (In Persian).
[20] Kaw, K., “Mechanics of composite materials”, 2nd ed, pp 212, 2006.
[21] Tutunchi, M., “Design and manufacture of circular pultrusion section HDPE/GF(Roving)”, MSc thesis, Tarbiat Modares University. Tir 1392, (In Persian).