[1]Babalola, P. O., Bolu, C., Inegbenebor, O., and Odunfa, K. M., “Development of Aluminium Matrix Composites: A review,” International Journal of Engineering and Technology Research, Vol. 2, pp. 1-11, 2014.
[2]Akhlaghi, F., Eslami-Farsani, R., and Sabet, S. M. M., “Synthesis and Characteristics of Continuous Basalt Fiber Reinforced Aluminum Matrix Composites,” Journal of Composite Materials, Vol. 47, No. 27, pp. 3379-3388, 2013.
[3]Sabet, S. M.M., Akhlaghi, F., and Eslami-Farsani, R., “Production and Optimization of Aluminum-Basalt Composites by Hand Lay-Out Technique,” Lecture Notes in Engineering and Computer Science, Vol. 3, pp. 1826-1829, 2012.
[4]Sabet, S. M. M., Akhlaghi, F., and Eslami-Farsani, R., “The Effect of Thermal Treatment on Tensile Properties of Basalt Fibers, Journal of Ceramic Science & Technology, Vol. 06, No. 03, pp. 245-248, 2015.
[5]Abd El-Azim, A. N., Kassem, M. A., El-Baradie, Z. M., and Waly, M., “Structure and Properties of Short Alumina Fibre Reinforced Alsi18cuni Produced by Stir Casting,” Materials Letters, Vol. 56, No. 6, pp. 936-969, 2002
[6]Babu, J. S. S., and Kang, C. G., “Nanoindentation Behaviour of Aluminium Based Hybrid Composites with Graphite Nanofiber/Alumina Short Fiber,” Materials and Design, Vol. 31, No. 10, pp. 4881-4885, 2010.
[7]Hajjari, E., Divandari, M., and Mirhabibi, A. R., “The Effect of Applied Pressure on Fracture Surface and Tensile Properties of Nickel Coated Continuous Carbon Fiber Reinforced Aluminum Composites Fabricated by Squeeze Casting,” Materials and Design, Vol. 31, No. 5, pp. 2381-2386, 2010.
[8]Kyono,T., Kuroda, E., Kitamura, E., Mori, T., and Taya, M., “Effects of Thermal Cycling on Properties of Carbon Fiber/Aluminum Composites,” Journal of Engineering Materials, Vol. 110, No. 2, pp. 89-95, 1988.
[9]Lee, W. S., Sue, W. C., and Lin, C. F., “The Effects of Temperature and Strain Rate on the Properties of Carbon-Fiber-Reinforced 7075 Aluminum Alloy Metal-Matrix Composite,” Composites Science and Technology, Vol. 60, No. 10, pp. 1975-1983, 2000.
[10]Akbarzadeh, E., “Characterization of Aluminum Silicon / Short Carbon Fiber Composites Fabricated by Novel Thixomixing Method”, PhD. Thesis, Universitat Polit`ecnica de Catalunya, Spain, 2016.
[11]Matsunaga, T., Matsuda, K., Hatayama, T., Shinozaki, K., and Yoshida, M., “Fabrication of Continuous Carbon Fiber-Reinforced Aluminum-Magnesium Alloy Composite Wires Using Ultrasonic Infiltration Method,” Composites Part A: Applied Science and Manufacturing, Vol 38, No. 8, pp. 1902-1911, 2007.
[12]Lucas, G. E., Sheckherd, J. W., Odette G. R., and Panchanadeeswaran, S., "Shear Punch Tests for Mechanical Property Measurements in TEM Disc-Sized Specimens," Journal of Nuclear Materials, V. 122, No. 1–3, pp. 429-434, 1984.
[13]Wanjara, P., Drew R. A. L., and Yue, S., "Application of Small Specimen Testing Technique for Mechanical Property Assessment of Discontinuously Reinforced Composites," Materials Science and Technology, Vol. 22, No. 1, pp. 61-71, 2006.
[14]Hosur, M. V., Waliul Islam, S. M., Vaidya U. K., and Kumar, A., "Dynamic Punch Shear Characterization of Plain Weave Graphite/Epoxy Composites at Room and Elevated Temperatures," Composite Structures, Vol. 70, No. 3, pp. 295-307, 2005.
[15]Toloczko, M. B., Hamilton, M. L., and Lucas, G. E., "Ductility Correlations between Shear Punch and Uniaxial Tensile Test Data," Journal of Nuclear Materials, Vol. 283-287, pp. 987-991, 2000.
[16]Guduru, R. K., Nagasekhar, A. V., Scattergood, R. O., Koch C. C., and Murty, K. L., "Finite Element Analysis of a Shear Punch Test," Metallurgical and Materials Transactions A, Vol. 37A, pp. 1477-1483, 2006.
[17]Tavighi, K., Emamy, M., Emami, A.R., "Effects of extrusion temperature on the microstructure and tensile properties of Al–16 wt% Al4Sr metal matrix composite," Materials and Design,Vol 46,pp. 598-604, 2013.
[18]Guduru, R. K., Darling, K. A., Kishore, R., Scattergood, R. O., Koch C. C., and Murty, K. L., "Evaluation of Mechanical Properties Using Shear-Punch Testing," Materials Science and Engineering A, Vol. 395, No. 1–2, pp. 307-314, 2005.
[19]Hendronursito, Y., Ojahan, T., Rajagukguk, Sofii, R. N. S. A., Isnugroho, K., Birawidha, D. C., and Al Muttaqii, M. A. M., "Analysis of Aluminum Basalt Particulate Composite Using Stirring Casting Method Through Taguchi Method Approach," IOP Conference Series: Materials Science and Engineering, Vol. 807, No. 1, p. 012003, 2020.
[20]Karthigeyan, R., Ranganath, G., and Sankaranarayanan, S., "Mechanical Properties and Microstructure Studies of Aluminium (7075) Alloy Matrix Composite Reinforced with Short Basalt Fibre," European Journal of Scientific Research, Vol. 68, No. 4, pp. 606-615, 2012.
[21]Bazilah, N. F., Kamal, M. R. M., Maidin, N. A., Marjom, Z., Ali, M. A. M., and Ahmad, U. H., "T6 Solutionizing Heat Treatment Parameter of A356 Alloy by Investment Casting," IOP Conference Series: Materials Science and Engineering, Vol. 834, No. 1, p. 012005, 2020.
[22]Abbaschian, R., and Reed-Hill, R.E., "Physical Metallurgy Principles - SI Version," Cengage Learning, pp. 411-418, 2009.
[23]Akbarzadeh, A., Picas, J. A., and Baile, M. T., “Orthogonal Experimental Design Applied for Wear Characterization of Aluminum/Csf Metal Composite Fabricated by The Thixomixing Method,” International Journal of Material Forming, Vol. 9, No. 5, pp. 601-612, 2016.
[24]Akbarzadeh, E., Barrachina, J. A. P., and Puig, M. B., “Thixomixing as Novel Method for Fabrication Aluminum Composite with Carbon and Alumina Fibers, International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, Vol. 9, No. 8, pp. 822-826, 2015.