[1] Payandehpeyman, J., Parvini, N., Moradi, K., and Hashemian, N., “Detection of SARS-CoV-2 Using Antibody–Antigen Interactions with Graphene-Based Nanomechanical Resonator Sensors,” ACS Appl. Nano Mater. , Vol. 4, No. 6, pp. 6189–6200, 2021.
[2] Payandehpeyman, javad, Majzoobi, G., and Bagheri, R., “Deriving Parameters of Pressure-Dependent Yield Surface for Polymeric Composites Using Kriging-based Optimization Method,” Modares Mech. Eng. , Vol. Inpress, 2015.
[3] Malek-mohammadi, H., Majzoobi, G., and Payandehpeyman, J., “Experimental and analytical study of the compression behavior of graphene oxide and nano-clay reinforced polycarbonate nanocomposites at low strain rates,” , Vol. 6, No. 3, pp. 427–434, 2019.
[4] Shokrieh, M.M. and Zeinedini, A., “Effect of CNTs debonding on mode I fracture toughness of polymeric nanocomposites,” JMADE , Vol. 101, pp. 56–65, 2016.
[5] Zeinedini, A., Shokrieh, M.M., and Ebrahimi, A., “The e ff ect of agglomeration on the fracture toughness of CNTs-reinforced nanocomposites,” Theor. Appl. Fract. Mech. , Vol. 94, No. January, pp. 84–94, 2018.
[6] Wernik, J.M. and Meguid, S.A., “Recent developments in multifunctional nanocomposites using carbon nanotubes,” Appl. Mech. Rev. , Vol. 63, No. 5, pp. 1–40, 2010.
[7] Verma, P., Saini, P., Malik, R.S., and Choudhary, V., “Excellent electromagnetic interference shielding and mechanical properties of high loading carbon-nanotubes/polymer composites designed using melt recirculation equipped twin-screw extruder,” Carbon N. Y. , Vol. 89, pp. 308–317, 2015.
[8] Sanli, A., Benchirouf, A., Müller, C., and Kanoun, O., “Piezoresistive performance characterization of strain sensitive multi-walled carbon nanotube-epoxy nanocomposites,” Sensors Actuators, A Phys. , Vol. 254, No. 2017, pp. 61–68, 2017.
[9] Dietrich Stauffer, A.A., Dietrich Stauffer, Ammon Aharony - Introduction to percolation theory-CRC Press (1994).pdf, , pp. 192.
[10] Feng, C. and Jiang, L., “Micromechanics modeling of the electrical conductivity of carbon nanotube (CNT)-polymer nanocomposites,” Compos. Part A Appl. Sci. Manuf. , Vol. 47, No. 1, pp. 143–149, 2013.
[11] Tabatabaee, M., Taheri-Behrooz, F., Razavi, S.M., and Liaghat, G.H., “Electrical conductivity enhancement of Carbon/Epoxy composites using nanoparticles,” J. Sci. Technol. Compos. , Vol. 5, No. 4, pp. 605–614, 2019.
[12] Mora, A., Han, F., and Lubineau, G., “Computational modeling of electrically conductive networks formed by graphene nanoplatelet-carbon nanotube hybrid particles,” Model. Simul. Mater. Sci. Eng. , Vol. 26, No. 3, 2018.
[13] Fang, C., Zhang, J., Chen, X., and Weng, G.J., “A Monte Carlo model with equipotential approximation and tunneling resistance for the electrical conductivity of carbon nanotube polymer composites,” Carbon N. Y. , Vol. 146, pp. 125–138, 2019.
[14] Lu, X., Yvonnet, J., Detrez, F., and Bai, J., “Multiscale modeling of nonlinear electric conductivity in graphene-reinforced nanocomposites taking into account tunnelling effect,” J. Comput. Phys. , Vol. 337, pp. 116–131, 2017.
[15] Taherian, R., “Experimental and analytical model for the electrical conductivity of polymer-based nanocomposites,” Compos. Sci. Technol. , Vol. 123, pp. 17–31, 2016.
[16] Mazaheri, M., Payandehpeyman, J., and Khamehchi, M., “A developed theoretical model for effective electrical conductivity and percolation behavior of polymer-graphene nanocomposites with various exfoliated filleted nanoplatelets,” Carbon N. Y. , Vol. 169, pp. 264–275, 2020.
[17] García-Macías, E., D’Alessandro, A., Castro-Triguero, R., Pérez-Mira, D., and Ubertini, F., “Micromechanics modeling of the electrical conductivity of carbon nanotube cement-matrix composites,” Compos. Part B Eng. , Vol. 108, pp. 451–469, 2017.
[18] Payandehpeyman, J., Mazaheri, M., and Khamehchi, M., “Prediction of electrical conductivity of polymer-graphene nanocomposites by developing an analytical model considering interphase, tunneling and geometry effects,” Compos. Commun. , Vol. 21, No. March, pp. 100364, 2020.
[19] Payandehpeyman, J. and Mazaheri, M., “Parametric investigation of effective elastic properties of exfoliated polymer/clay nanocomposites using a developed mean-field model,” Mech. Adv. Mater. Struct. , Vol. 0, No. 0, pp. 1–12, 2021.
[20] Farhadpour, M., Jahanaray, B., Pircheraghi, G., and Bagheri, R., “Simultaneous use of physical and chemical dispersants for electrical conductivity enhancement in polyamide 6/carbon nanotube/conductive carbon black hybrid nanocomposites,” Polym. Technol. Mater. , Vol. 00, No. 00, pp. 1–13, 2021.
[21] Mazaheri, M., Payandehpeyman, J., and Jamasb, S., “Modeling of Effective Electrical Conductivity and Percolation Behavior in Conductive-Polymer Nanocomposites Reinforced with Spherical Carbon Black,” Appl. Compos. Mater. , No. 0123456789, 2021.
[22] Yan, K.Y., Xue, Q.Z., Zheng, Q.B., and Hao, L.Z., “The interface effect of the effective electrical conductivity of carbon nanotube composites,” Nanotechnology , Vol. 18, pp. 6, 2007.
[23] Xue, Q., “The influence of particle shape and size on electric conductivity of metal-polymer composites,” Eur. Polym. J. , Vol. 40, No. 2, pp. 323–327, 2004.
[24] J. Griffiths, D., “Introduction to Electrodynamics David J. Griffiths Fourth Edition,” ISBN 9788578110796, 2013.
[25] Simmons, J.G., “Generalized Formula for the Electric Tunnel Effect between Similar Electrodes Separated by a Thin Insulating Film,” J. Appl. Phys. , Vol. 34, No. 6, pp. 1793–1803, 1963.
[26] Shayesteh Zeraati, A. and Sundararaj, U., “Carbon nanotube/ZnO nanowire/polyvinylidene fluoride hybrid nanocomposites for enhanced electromagnetic interference shielding,” Can. J. Chem. Eng. , Vol. 98, No. 5, pp. 1036–1046, 2020.
[27] Kumar, S., Gupta, T.K., and Varadarajan, K.M., “Strong, stretchable and ultrasensitive MWCNT/TPU nanocomposites for piezoresistive strain sensing,” Compos. Part B Eng. , Vol. 177, pp. 107285, 2019.
[28] Maiti, S., Suin, S., Shrivastava, N.K., and Khatua, B.B., “Low percolation threshold in melt-blended PC/MWCNT nanocomposites in the presence of styrene acrylonitrile (SAN) copolymer: Preparation and characterizations,” Synth. Met. , Vol. 165, No. 1, pp. 40–50, 2013.
[29] Reddy, S.K., Kumar, S., Varadarajan, K.M., Marpu, P.R., Gupta, T.K., and Choosri, M., “Strain and damage-sensing performance of biocompatible smart CNT/UHMWPE nanocomposites,” Mater. Sci. Eng. C , Vol. 92, No. June, pp. 957–968, 2018.