[1] Gao, C., Peng, S., Feng, P., and Shuai, C., “Bone biomaterials and interactions with stem cells,” Bone research, Vol. 5, No. 1, pp. 1-33, 2017.
[2] Hasany, M., Thakur, A., Taebnia, N., Kadumudi, F. B., Shahbazi, M. A., Pierchala, M. K., “Combinatorial screening of nanoclay-reinforced hydrogels: a glimpse of the -holy grail- in orthopedic stem cell therapy,” ACS applied materials & interfaces, Vol. 10, No. 41, pp. 34924-34941, 2018.
[3] Gill, S. P. S., Raj, M., Singh, P., Kumar, D., Singh, J., & Rastogi, P., “Infected nonunion with implant in situ in long bone fractures, managed by retention of implant-our experience,” Journal of Orthopedics, Traumatology and Rehabilitation, Vol. 9, No.1, pp. 29, 2018.
[4] Saghiri, M. A., Orangi, J., Asatourian, A., Gutmann, J. L., Garcia-Godoy, F., Lotfi, M., & Sheibani, N., “Calcium silicate-based cements and functional impacts of various constituents,” Dental materials journal, Vol. 36, No.1, pp. 8-18, 2017.
[5] Jin, W., & Chu, P. K. “Orthopedic implants,” Vol. 17, No.20, pp. 1-15, 2017.
[6] Wan, X., Hu, A., Li, M., Chang, C., & Mao, D., “Performances of CaSiO3 ceramic sintered by Spark plasma sintering,” Materials Characterization, Vol. 59, No.3, pp. 256-260, 2008.
[7] Liu, W., Huan, Z., Xing, M., Tian, T., Xia, W., Wu, C., “Strontium-substituted dicalcium silicate bone cements with enhanced osteogenesis potential for orthopaedic applications,” Materials, Vol. 12, No. 14, pp. 2276, 2019.
[8] Beltrán, V., Lazzarini, M., Figueroa, R., Sousa, V., & Engelke, W., “In Situ Endoscopic Analysis of Vascular Supply and Regenerated Alveolar Bone in β-TCP Grafted and Ungrafted Postextraction Sites before Implant Placement: A Prospective Case Control Study.” BioMed Research International, 2019.
[9] Balasubramanian, R., Nagumothu, R., Parfenov, E., & Valiev, R., “Development of nanostructured titanium implants for biomedical implants–A short review,” Materials Today: Proceedings, Vol. 46, No. 1, pp. 1195-1200, 2021.
[10] Cao, H. C., & Liang, Y. L., “The microstructures and mechanical properties of graphene-reinforced titanium matrix composites,” Journal of Alloys and Compounds, Vol. 812, No. 1, pp. 152057, 2020.
[11] Dong, L., Chen, W., Deng, N., Song, J., & Wang, J., “Investigation on arc erosion behaviors and mechanism of W70Cu30 electrical contact materials adding graphene,” Journal of Alloys and Compounds, Vol. 696, No. 1, pp. 923-930, 2017.
[12] Pérez-Bustamante, R., Bolaños-Morales, D., Bonilla-Martínez, J., Estrada-Guel, I., & Martínez-Sánchez, R., “Microstructural and hardness behavior of graphene-nanoplatelets/aluminum composites synthesized by mechanical alloying,” Journal of alloys and compounds, Vol. 615, No. 1, pp. S578-S582, 2014.
[13] Khodabakhshi, F., Arab, S. M., Švec, P., & Gerlich, A. P., “Fabrication of a new Al-Mg/graphene nanocomposite by multi-pass friction-stir processing: Dispersion, microstructure, stability, and strengthening.” Materials Characterization, Vol. 132, No. 1, pp. 92-107, 2017.
[14] Lütjering, G., Williams, J.C., Gysler, A., “Titanium engineering materials and progresses,” 2nd ed. Berlin: Springle; Vol. 379, 2007.
[15] Luo, S. D., Li, Q., Tian, J., Wang, C., Yan, M., Schaffer, G. B., & Qian, M., “Self-assembled, aligned TiC nanoplatelet-reinforced titanium composites with outstanding compressive properties,” Scripta Materialia, Vol. 69, No. 1, pp. 29-32, 2013.
[16] Shufeng, L. I., Kondoh, K., Imai, H., Chen, B., Jia, L., & Umeda, J., “Microstructure and mechanical properties of P/M titanium matrix composites reinforced by in-situ synthesized TiC–TiB.” Materials Science and Engineering: A,Vol. 628, No. 1, pp. 75-83, 2015.
[17] Valiev, R. Z., & Langdon, T. G., “Principles of equal-channel angular pressing as a processing tool for grain refinement,” Progress in materials science, Vol. 51, No. 7, pp. 881-981, 2006.
[18] Zhilyaev, A. P., & Langdon, T. G., “Using high-pressure torsion for metal processing: Fundamentals and applications,” Progress in Materials science, Vol. 53, No. 6, pp. 893-979, 2008.
[19] Azushima, A., R. Kopp, A. Korhonen, D.Y. Yang, F. Micari, G.D. Lahoti, P. Groche, J. Yanagimoto, N. Tsuji, A. Rosochowski, A. Yanagida, “CIRP Ann,” Manuf & Technol, Vol. 57, No. 6, pp. 716–735, 2008.
[20] Valiev, R. Z., Islamgaliev, R. K., & Alexandrov, I. V., “Bulk nanostructured materials from severe plastic deformation,” Progress in materials science, Vol. 45, No. 2, pp. 103-189, 2000.
[21] A.P. Zhilyaev, T.G. Langdon, Prog. Mater Sci, Vol. 53, No. 2, pp. 881–981, 2008.
[22] Pardis, N., & Ebrahimi, R., “Deformation behavior in Simple Shear Extrusion (SSE) as a new severe plastic deformation technique,” Materials Science and Engineering: A, Vol. 527, No. 2, pp. 355-360, 2009.
[23] Sedehi, S. M. R., Khosravi, M., & Yaghoubinezhad, Y., “Mechanical properties and microstructures of reduced graphene oxide reinforced titanium matrix composites produced by spark plasma sintering and simple shear extrusion,” Ceramics International, Vol. 47, No. 23, pp. 33180-33190, 2021.
[24] Cengiz, B. "avuz Gokce." Y., Yildiz, N., Aktas, Z. and Calimli, A.,“Characterization of hydroxyapatite nanoparticles,” Colloids and Surfaces A: Physicochem”. Eng. Aspects, Vol. 156, pp. 29-33, 2008.
[25] Taheridoustabad, I., Khosravi, M., & Yaghoubinezhad, Y., “Fabrication of GO/RGO/TiC/TiB2 nanocomposite coating on Ti–6Al–4V alloy using electrical discharge coating and exploring its tribological properties,” Tribology International, Vol. 156, No. 23, pp. 106860, 2021.
[26] Zhang, Y., Chen, F., Zhang, Y., & Du, C., “1Influence of graphene oxide additive on the tribological and electrochemical corrosion properties of a PEO coating prepared on AZ31 magnesium alloy,” Tribology International, Vol. 146, No. 23, pp. 106135, 2020.
[27] Yaghoubinezhad, Y., & Afshar, A., “Experimental design for optimizing the corrosion resistance of pulse reverse electrodeposited graphene oxide thin film,” Journal of Solid State Electrochemistry, Vol. 19, No. 5, pp. 1367-1380, 2015