[1]Botelho, E. C., Silva, R. A., Pardini, L. C. and Rezende, M. C.,“A Review on the Development and Properties of Continuous Fiber/Epoxy/Aluminum Hybrid Composites for Aircraft Structures“, Materials Research, Vol. 9, No. 3, pp. 247-256, 2006
[2]Ghasemi, A. R., Mohandes, M., Dimitri, R. and Tornabene, F. J.,“Agglomeration Effects on the Vibrations of Cnts/Fiber/Polymer/Metal Hybrid Laminates Cylindrical Shell“, Composites Part B: Engineering, Vol. 167, pp. 700-716, 2019.
[3]Mohandes, M., Ghasemi, A. R., Irani-Rahagi, M., Torabi, K., Taheri-Behrooz, F. J, “Development of Beam Modal Function for Free Vibration Analysis of Fml Circular Cylindrical Shells“, Journal of Vibration and Control, Vol. 24, No. 14, pp. 3026-3035, 2018.
[4]Ghasemi, A. and Mohammadi, M. J., “Residual Stress Measurement of Fiber Metal Laminates Using Incremental Hole-Drilling Technique in Consideration of the Integral Method“, International Journal of Mechanical Sciences, Vol. 114, pp. 246-256, 2016.
[5]Botelho, E., Campos, A., De Barros, E., Pardini, L. and Rezende, M. C.., “Damping Behavior of Continuous Fiber/Metal Composite Materials by the Free Vibration Method“, Composites Part B: Engineering, Vol. 37, No. 2-3, pp. 255-263, 2005.
[6]Sinmazçelik, T., Avcu, E., Bora, M. Ö., Çoban, O., “A Review: Fibre Metal Laminates, Background, Bonding Types and Applied Test Methods“, Materials & Design, Vol. 32, No. 7, pp. 3671-3685, 2011.
[7]Vogelesang, L. B. and Vlot, A.., “Development of Fibre Metal Laminates for Advanced Aerospace Structures“, Journal of Materials Processing Technology, Vol. 103, No. 1, pp. 1-5, 2000..
[8]Caprino, G., Lopresto, V., Iaccarino, P., “A Simple Mechanistic Model to Predict the Macroscopic Response of Fibreglass–Aluminium Laminates under Low-Velocity Impact“, Composites Part A: Applied Science and Manufacturing, Vol. 38, No. 2, pp. 290-300, 2007.
[9]Abdullah, M., Cantwell, W, “The Impact Resistance of Polypropylene-Based Fibre–Metal Laminates“, Composites Science and Technology, Vol. 66, No. 11-12, pp. 1682-1693, 2006.
[10]Atas, C. J. J. o. R. P. and Composites, “An Experimental Investigation on the Impact Response of Fiberglass/Aluminum Composites“, Vol. 26, No. 14, pp. 1479-1491, 2007.
[11]Faramarz, A. G., Esmaeil, A. F. and Ali, P. A., “An Experimental Study of Temperature Effect on Low-Velocity Impact Response of Notched Aluminum Plates Repaired by Fml Composite Patches,“ In Persian, Modares Mechanical Engineering, Vol. 14, No. 9, pp. 175-182, 2014.
[12]Aksoylar, C., Ömercikoğlu, A., Mecitoğlu, Z. and Omurtag, M. H., “Nonlinear Transient Analysis of Fgm and Fml Plates under Blast Loads by Experimental and Mixed Fe Methods“, Composite Structures, Vol. 94, No. 2, pp. 731-744, 2012.
[13]Harras, B., Benamar, R., White, R. J., “Experimental and Theoretical Investigation of the Linear and Non-Linear Dynamic Behaviour of a Glare 3 Hybrid Composite Panel“, Journal of Sound and Vibration, Vol. 252, No. 2, pp. 281-315, 2002.
[14]Majid, J. O. and mohammadreza, M. S., “Numerical Investigation of the Behavior of Fml Composite Plates under Low Velocity Impact “ In Persian, Journal of Energetic Materials, Vol. 11, No. 2, pp. 23-38, 2016.
[15]Ghasemi, F. A., Raissi, S., Malekzadehfard, K. “Analytical and Mathematical Modeling and Optimization of Fiber Metal Laminates (Fmls) Subjected to Low-Velocity Impact Via Combined Response Surface Regression and Zero-One Programming“, Latin American Journal of Solids and Structures, Vol. 10, No. 2, pp. 391-408, 2013.
[16]Ashena, G. F., Malekzadeh, F. K. and Paknejad, R., “Response of Cantilever Fiber Metal Laminate (Fml) Plates Using an Analytical-Numerical Method“, In Persian, Modares Mechanical Engineering, Vol. 13, No. 3, pp. 57-67, 2013.
[17]Kazancı, Z., Mecitoğlu, Z. J., “Nonlinear Dynamic Behavior of Simply Supported Laminated Composite Plates Subjected to Blast Load“, Journal of Sound and Vibration, Vol. 317, No. 3-5, pp. 883-897, 2008.
[18]Keramat, M.-F., hossein, A. A. and Naser, Z., “Analytical Modeling to Predict Dynamic Response of Fiber-Metal Laminated Panel Subjected to Low Velocity Impact“ In Persian, Journal of Science and Technology of Composites, Vol. 5, No. 3, pp. 331-342, 2018.
[19]Keramat, M.-F., Hasan, P. G. and Mansour, K., “Dynamic Response Analysis of a Sandwich Plate with a Flexible Core and Elastic Substrate under a Low Velocity Impact“ In Persian, Amirkabir Journal of Science & Research (Mechanical Engineering), Vol. 45, No. 2, pp. 27-42, 2013.
[20]Payeganeh, G. H., Ghasemi, F. A. and Malekzadeh, K., “Dynamic Response of Fiber–Metal Laminates (Fmls) Subjected to Low-Velocity Impact“, Thin-Walled Structures, Vol. 48, No. 1, pp. 62-70, 2010.
[21]Morinière, F., Alderliesten, R. and Benedictus, R., “Energy Distribution in Glare and 2024–T3 Aluminium During Low-Velocity Impact“, 2012.
[22]Morinière, F., Alderliesten, R., Sadighi, M. and Benedictus, R., “An Integrated Study on the Low-Velocity Impact Response of the Glare Fibre-Metal Laminate“, Composite Structures, Vol. 100, pp. 89-103, 2013.
[23]Reza, J. and Farzad, S. M., “Geometrically Nonlinear Dynamic Analysis of Fml Cylindrical Shells under Blast Loading“ In Persian, in Conference on Civil engineering, Architecture & Urban planning of the ISLAMIC COUNTRIES, Iran-Tabriz, 2018.
[24]Kazancı, Z. J. I. J. o. N.-L. M., “Dynamic Response of Composite Sandwich Plates Subjected to Time-Dependent Pressure Pulses“, International Journal of Non-Linear Mechanics, Vol. 46, No. 5, pp. 807-817, 2011.
[25]Setoodeh, A., Malekzadeh, P., Nikbin, K. J. M. and Design, “Low Velocity Impact Analysis of Laminated Composite Plates Using a 3d Elasticity Based Layerwise Fem“, Vol. 30, No. 9, pp. 3795-3801, 2009.
[26]Caprino, G., Spataro, G., Del Luongo, S.“Low-Velocity Impact Behaviour of Fibreglass–Aluminium Laminates“, Composites Part A: Applied Science and Manufacturing, Vol. 35, No. 5, pp. 605-616, 2004.
[27]Kumari, E. and Singha, M., “Nonlinear Response of Laminated Panels under Blast Load“, Procedia Engineering, Vol. 173, pp. 539-546, 2017.
[28]Dobyns, A.“Analysis of Simply-Supported Orthotropic Plates Subject to Static and Dynamic Loads“, AIAA Journal, Vol. 19, No. 5, pp. 642-650, 1981.
[29]Baştürk, S., Uyanık, H. and Kazancı, Z., “An Analytical Model for Predicting the Deflection of Laminated Basalt Composite Plates under Dynamic Loads“, Composite Structures, Vol. 116, pp. 273-285, 2014.
[30]Ghasemi, A., Taheri-Behrooz, F., Farahani, S., Mohandes, M., “Nonlinear Free Vibration of an Euler-Bernoulli Composite Beam Undergoing Finite Strain Subjected to Different Boundary Conditions“
, Journal of Vibration and Control, Vol. 22, No. 3, pp. 799-811, 2016.
[31]Mohandes, M., Ghasemi, A. R., “Finite Strain Analysis of Nonlinear Vibrations of Symmetric Laminated Composite Timoshenko Beams Using Generalized Differential Quadrature Method“, Journal of Vibration and Contro, Vol. 22, No. 4, pp. 940-954, 2016.
[32]Ghasemi, A., Mohandes, M., “Nonlinear Free Vibration of Laminated Composite Euler-Bernoulli Beams Based on Finite Strain Using Generalized Differential Quadrature Method“, Mechanics of Advanced Materials and Structures, Vol. 24, No. 11, pp. 917-923, 2017.
[33]Whitney, J. and Pagano, N., “Shear Deformation in Heterogeneous Anisotropic Plates“, Journal of Applied Mechanices, Vol. 37, No. 4, pp. 1031-1036, 1970.
[34]Yamaki, N., “Influence of Large Amplitudes on Flexural Vibrations of Elastic Plates“, Vol. 41, No. 12, pp. 501-510, 1961.