[1]Sottos, N. White, S. and Bond, I., “Introduction: Self-Healing Polymers and Composites”, Journal of The Royal Society Interface, Vol. 4, pp. 347-353, 2007.
[2]Trask, R.S. Williams, H.R and Bond, I.P., “Self-Healing Polymer Composites: Mimicking Nature to Enhance Performance”, Bioinspiration & Biomimetics, Vol. 2, pp. 1-9, 2007.
[3]Wang, Y. Pham, T.D. and Ji, C., “Self-healing composites: A review”, Cogent Engineering, Vol. 2, pp. 107-121, 2015.
[4]Kanua, N.J. Gupta, E. Vates, U.K. and Singh, G.K., “Self-healing composites: A state-of-the-art review”, Composites Part A, Vol 121, pp. 474–486, 2019.
[5]Dry, C., “Matrix Cracking Repair and Filling Using Active and Passive Modes for Smart Timed Release of Chemicals from Fibers into Cement Matrices”, Smart Materials and Structures, Vol. 3, pp. 118-123, 1994.
[6]Dry, C., “Procedures Developed for Self-Repair of Polymeric Matrix Composite Materials”, Composite Structures, Vol. 35, pp. 263–269, 1996.
[7]White, S.R. Sottos, N.R. Geubelle, P.H. Moore, J.S. Kessler, M.R. Sriram, S.R. Brown, E.N. and Viswanathan, S., “Autonomic Healing of Polymer Composites, Nature”, Vol. 409, pp. 794–797, 2001.
[8]Brown, E.N. Sottos, N.R. and White, S.R., “Fracture Testing of a Self-Healing Polymer Composite”, Experimental Mechanics, Vol. 42, pp. 372-379, 2002.
[9]Jericho, L.M. Scott, R. White, S.R. and Sottos, N.R., “A Self-Sealing Fiber-Reinforced Composite”, Journal of Composite Materials, 2010, Vol. 44, pp. 1-13, 2010.
[10]Kessler, M. R. and White, S. R., “Self-Activated Healing of Delamination Damage in Woven Composites”, Composites Part A, Vol. 32, pp. 683-699, 2001.
[11]Kessler, M. R. Sottos, N. R. and White, S. R., “Self-Healing Structural Composite Materials”, Composites Part A, Vol. 34A, pp. 743–753, 2003.
[12]Hayes, S.A. Jones, F.R. Marshiya, K. and Zhang, W., “A self-healing thermosetting composite material”, Composites Part A, Vol. 38, pp. 1116–1120, 2007.
[13]Belay, S.M. Leader.C.B. Hawyes V.J. Humberstone.L. and Curits P.T., “A Smart Repair System for Polymer Matrix Composite”, Composite Part A, Vol. 32, pp. 1767-1776, 2001.
[14]Pang, J. W. C. and Bond, I. P., “Bleeding Composites-Damage Detection and Self-Repair Using a Biomimetic Approach”, Composites Part A, Vol. 36A, pp. 183–188, 2005.
[15]Pang, J. W. C. and Bond, I. P., “A Hollow Fibre Reinforced Polymer Composite Encompassing Self-Healing and Enhanced Damage Visibility”, Composites Science and Technology, Vol. 65, pp. 1791– 1799, 2005.
[16]Trask R. S. and Bond I. P., “Biomimetic Self-Healing of Advanced Composite Structures Using Hollow Glass Fibres”, Smart Materials and Structures, Vol. 15, pp. 704-710. 2006.
[17]Coppola, A.M. Thakre, P.R. Sottos, N.R. and White, S.R., “Tensile properties and damage evolution in vascular 3D woven glass/epoxy composites”, Composites Part A, Vol. 59, pp. 9-17, 2014.
[18]Williams, G. Trask, R. and Bond, I., “A Self-healing Carbon Fiber Reinforced Polymer for Aerospace Applications”, Composites Part A, Vol. 38, pp. 1525-1532, 2007.
[19]Zainuddin, S. Arefin, T. Fahim, A. Hosur, M. V. Tyson, J. D. Kumar, A. Trovillion, J. and Jeelani, S., “Recovery and Improvement in Low-Velocity Impact Properties of E-Glass/Epoxy Composites Through Novel Self-Healing Technique”, Composite Structures, Vol. 108, pp. 277-286, 2014.
[20]Nademi, M. Mozaffari, A. and Farrokhabadi, A., “A New Self Healing Method in Composite Laminates Using the HollowGlass”, Key Engineering Materials, Vol. 471, pp. 548-551, 2011.
[21]Eslami-Farsani, R. Sari, A. and Khosravi, H., “Mechanical properties of carbon fibers/epoxy composite containing anhydride self-healing material under transverse loading”, In Persian, Journal of Science and Technology of Composites, Vol. 3, No. 3, pp. 285-290, 2016.
[22]Abbasnia, Sh. Eslami-Farsani, R. and Khosravi, H. “Mechanical performance of self-healing fiber-metal laminates under transverse loading”, In Persian, Journal of Science and Technology of Composites, Vol. 5, No. 02, pp. 185-190, 2018.
[23]Eslami-Farsani, R. Mohabbati, F. and Khosravi, H., “Experimental study of tensile behavior of self-healing fiber-metal laminates composites with chopped hollow glass fibers”, In Persian, Journal of Science and Technology of Composites, Vol. 4, No. 4, pp. 399-404, 2018.
[24]Mohammadi, M. A. Babolhavaeji, M. Eslami-Farsani, R. and Zamani, M. R., “Effect of time on healing behavior of microvascular channels based self-healing E-glass fibers/epoxy composite under flexural and tensile loadings condition”, In Persian, Journal of Science and Technology of Composites, In-Press.
[25]Eslami-Farsani, R. Khalili, S. M. R. Khademoltoliati, A. and Saeedi, A., “Tensile and creep behavior of microvascular based self-healing composites: Experimental study”, Mechanics of Advanced Materials and Structures, 2019, DOI: 10.1080/15376494.1567882. In-Press.
[26]Saurabh, S. and Deepak, J., “The Effect of Healing Time on the Self-Healing Efficiency of Carbon Fiber Reinforced Polymer Composites”, Materials Today: Proceedings, Vol. 4, pp. 2903–2909, 2017.
[27]Khalili, S. M. R. Zarei, M. and Eslami-Farsani, R. , “Experimental study of the mechanical behavior of self-healing polymer composite under heating cycles”, In Persian, Journal of Science and Technology of Composites, In-Press.
[28]Norris, C. J. Bond, I. P. and Trask, R. S., “Interactions between Propagating Cracks and Bioinspired Self-Healing Vascules Embedded in Glass Fiber Reinforced Composites”, Composites Science and Technology, Vol. 71, pp. 847–853, 2011.
[29]Norris, C. J. Bond, I. P. and Trask, R. S., “Healing of Low-Velocity Impact Damage in Vascularised Composites”, Composites Part A, Vol. 44A, pp. 78–85, 2013.