[1] Khalili, S.M.R., Eslami-Farsani, R., “Investigation of Tensile and Burning Rate Behavior of Hybrid Glass-Semicarbon Fibers/Epoxy Composite,” In Persian, Modares Mechanical Engineering Journal, Vol. 47, No. 1, pp. 29-36, 2017.
[2] Eslami-Farsani, R., Khalili, S.M.R., Zangiabadi, A. R. & Banaie, K. A., “The effect of single filament and tow test methods on the mechanical properties of carbon fibers,” In Persian, Journal of Solid and Fluid Mechanics, Vol. 3, No. 2, pp. 1-10, 2013.
[3] Xue, Y., Liu, J. & Liang, J., “Correlative study of critical reactions in polyacrylonitrile based carbon fiber precursors during thermal-oxidative stabilization,” Polym. Degrad. Stab. Journal, Vol. 98, pp. 219–229, 2013.
[4] Crook, V., Ebdon, J., Hunt, B., Joseph, P. & Wyman, P., “The influence of comonomers on the degradation and flammability of polyacrylonitrile: Design input for a new generation of flame retardants,” Polym. Degrad. Stab. Journal, Vol. 95, pp. 2260–2268, 2010.
[5] Molaee, M., Bahramian, A.R., Ahmadi, I., “Kinetic Theory of Fracture Strength in Prediction of Fatigue Lifetime of Epoxy/Carbon Fiber Composites,” In Persian, Iran. J. Polym. Sci. Technol. (Persian), Vol. 29, pp. 427–439, 2017.
[6] Khaljiri, H. E., Farsani, R. E., Khorsand, H & Banaie, K. A., “Hybridization effect of fibers reinforcement on tensile properties of epoxy composites,” In Persian, Journal of Science and Technology of Composite, Vol. 1, No. 2, pp. 21-28, 2015.
[7] Bashir, Z., “A critical review of the stabilisation of polyacrylonitrile,” Carbon N. Y. Journal, Vol. 29, pp. 1081–1090, 1991.
[8] Xiao, S., Lv, H.,, “Thermal behavior and kinetics during the stabilization of polyacrylonitrile precursor in inert gas,” Appl. Polym. Sci. Journal, Vol. 122, pp. 480–488, 2011.
[9] Shimada, I., Takahagi, T., Fukuhara, M., Morita, K. & Ishitani, “FT‐IR study of the stabilization reaction of polyacrylonitrile in the production of carbon fibers,” Polym. Sci. Journal, Part A Polym. Chem. Vol. 24, pp. 1989–1995, 1986.
[10]Gupta, A. K., Paliwal, D. K. & Bajaj, P., “Effect of an acidic comonomer on thermooxidative stabilization of polyacrylonitrile,” Appl. Polym. Sci. Journal, Vol. 58, pp. 1161–1174, 1995.
[11] Sen, K., Bajaj, P. & Sreekumar, T. V., “Thermal Behavior of Drawn Acrylic Fibers,” Polym. Sci. Journal, Part B Polym. Phys. Vol. 41, pp. 2949–2958, 2003.
[12] Rahaman, M. S. A., Ismail, A. F. & Mustafa, A., “A review of heat treatment on polyacrylonitrile fiber,” Polym. Degrad. Stab. Journal, Vol. 92, pp. 1421–1432, 2007.
[13] Lei, S., Cao, W., Fu, Z. & Xu, L., “The conjugated plane formed in polyacrylonitrile during thermal stabilization,” Appl. Polym. Sci. Journal, Vol. 133, 2016.
[14] Sabet, E. N., Nourpanah, P. & Arbab, S., “A Novel Method for Investigation of Entropic Stress in Prestabilization of PAN-Based Precursor Fibers,” Adv. Polym. Technol. Journal, Vol. 36, pp. 424–432, 2017.
[15] Arbab, S. & Zeinolebadi, A., “A procedure for precise determination of thermal stabilization reactions in carbon fiber precursors,” Polym. Degrad. Stab. Journal, Vol. 98, pp. 2537–2545, 2013.
[16] Banaie, K. A., Mirjalili, M. & Eslami-Farsani,, “The study of the correlation between ascending and descending rates of the imposed specific stress and transposition of chemical reactions during PAN precursor fibers stabilization,” Polym. Degrad. Stab. Journal, Vol. 156, pp.234–244, 2018.
[17] Sabet, E. N., Nourpanah, P. & Arbab, S., “Quantitative analysis of entropic stress effect on the structural rearrangement during pre-stabilization of PAN precursor fibers,” Polym. Journal, (United Kingdom). Vol. 90, pp. 138–146, 2016.
[18] Golkarnarenji, G., Naebe, M., Church, J.S., Badii, K., Bab-Hadiashar, A., Atkiss, S., Khayyam, H., “Development of a predictive model for study of skin-core phenomenon in stabilization process of PAN precursor,” J. Ind. Eng. Chem. Journal, Vol. 49, pp. 46–60, 2017.
[19] Ju, A., Yan, Y., Wang, D,. Luo, J., Ge, M., Li, M., “A high molecular weight acrylonitrile copolymer prepared by mixed solvent polymerization: I. effect of monomer feed ratios on polymerization and stabilization,” RSC Adv. Journal, Vol. 4, pp. 64043–64052, 2014.
[20] Jing, M., Wang, C. guo, Wang, Q., Bai, Y. jun & Zhu, B., “Chemical structure evolution and mechanism during pre-carbonization of PAN-based stabilized fiber in the temperature range of 350-600 °C,” Polym. Degrad. Stab. Journal, Vol. 92, pp. 1737–1742, 2007.
[21] Ko, T. H., “Preparation of flame resistant fibers from polyacrylonitrile fibers,” Mater. Chem. Phys. Journal, Vol. 38, pp. 289–296, 1994.
[22] Grassie, N. & McGuchan, R., “Pyrolysis of polyacrylonitrile and related polymers-VI. Acrylonitrile copolymers containing carboxylic acid and amide structures,” Eur. Polym. J. Journal, Vol. 8, pp. 257–269, 1972.
[23] Liu, S., Jiang, H., Du, W. & Pan, D., “Spinnability in pre-gelled gel spinning of polyacrylonitrile precursor fibers,” Fibers Polym. Journal, Vol. 13, pp. 846–849, 2012.
[24] Zhao, J., Zhang, J., Zhou, T., Liu, X., Yuan, Q., Zhang, A., “New understanding on the reaction pathways of the polyacrylonitrile copolymer fiber pre-oxidation: online tracking by two-dimensional correlation FTIR spectroscopy,” RSC Adv. Journal, Vol. 6, pp. 4397–4409, 2016.
[25] Wangxi, Z., Jie, L. & Gang, W., “Evolution of structure and properties of PAN precursors during their conversion to carbon fibers,” Carbon N. Y. Journal, Vol. 41, pp. 2805–2812, 2003.
[26] Bansal, R. C., Donet, J. B. & Stoeckli, H. F., Active carbon, Marcel Dekker AG, New York, 1988.