[1] Rahmatabadi, D., Hashemi, R., Mohammadi, B. and Shojaee, T., “Experimental Evaluation of the Plane Stress Fracture Toughness for Ultra-Fine Grained Aluminum Specimens Prepared by Accumulative Roll Bonding Process“ Materials Science and Engineering: A, Vol. 708, pp. 301-310, 2017.
[2] Rahmatabadi, D. and Hashemi, R., “Experimental Investigation of Fracture Surfaces and Mechanical Properties of Aa1050 Aluminum Produced by Accumulative Roll Bonding Process“ Modares Mechanical Engineering, Vol. 16, No. 10, pp. 305-312, 2016.
[3] Rahmatabadi, D., Mohammadi, B., Hashemi, R. and Shojaee, T., “Experimental Investigation of Plane Stress Fracture Toughness for Al/Cu/Al Multilayer Produced by Cold Roll Bonding Method“ Modares Mechanical Engineering, Vol. 17, No. 5, pp. 166-174, 2017.
[4] Rahmatabadi, D., Mohammadi, B., Hashemi, R. and Shojaee, T., “An Experimental Study of Fracture Toughness for Nano/Ultrafine Grained Al5052/Cu Multilayered Composite Processed by Accumulative Roll Bonding“ Journal of Manufacturing Science and Engineering, Vol. 140, No. 10, pp. 101001-101001-11, 2018.
[5] Milner, D. and VAIDYANATH, L., “Significance of Surface Preparation in Cold Pressure Welding“ MET CONSTR BR WELD J, Vol. 7, pp. 1-6, 1960.
[6] Rahmatabadi, D., Tayyebi, M. and Hashemi, R., “Investigation of Mechanical Properties, Fractographyand Microstructure of Layered Al/Cu Composite Produced by Cold Roll Bonding“, 2017.
[7] Rahmatabadi, D. and Hashemi, R., “Experimental Investigation of Formability of Aluminum Sheets Produced by Cold Roll Bonding Process Used by Nakazima Test“ Modares Mechanical Engineering, Vol. 17, No. 3, pp. 451-454, 2017.
[8] Rahmatabadi, D., Hashemi, R., Mohammadi, B. and Shojaee, T., “Experiment Investigation of Plane Stress Fracture Toughness for Aluminum Sheets Produced by Cold Roll Bonding Process“ Modares Mechanical Engineering, Vol. 17, No. 2, pp. 101-108, 2017.
[9] Zhang, W. and Bay, N., “Influence of Different Surface Preparation Methods on the Bond Formation in Cold Pressure Welding“ in Proceeding of 379-388.
[10] Vaidyarath, L., Nicholas, M. and Milner, D., “Pressure Welding by Rolling Brit“ Welding J, Vol. 6, pp. 13-28, 1959.
[11] Pan, D., Gao, K. and Yu, J., “Cold Roll Bonding of Bimetallic Sheets and Strips“ Materials science and technology, Vol. 5, No. 9, pp. 934-939, 1989.
[12] Danesh Manesh, H. and Karimi Taheri, A., “Study of Mechanisms of Cold Roll Welding of Aluminium Alloy to Steel Strip“ Materials science and technology, Vol. 20, No. 8, pp. 1064-1068, 2004.
[13] Mohamed, H. and Washburn, J., “Mechanism of Solid State Pressure Welding“ Welding J, Vol. 55, pp. 302s-310s, 1975.
[14] Nguyen, V.-T., Kwon, S.-J., Kwon, O.-H. and Kim, Y.-S., “Mechanical Properties Identification of Sheet Metals by 2d-Digital Image Correlation Method“ Procedia Engineering, Vol. 184, pp. 381-389, 2017/01/01/, 2017.
[15] Shahmirzaloo, A. and Farahani, M., “Determination of Local Constitutive Properties of Aluminum Using Digital Image Correlation: A Comparative Study between Uniform Stress and Virtual Fields“.
[16] Foehring, D., Chew, H. B. and Lambros, J., “Characterizing the Tensile Behavior of Additively Manufactured Ti-6al-4v Using Multiscale Digital Image Correlation“ Materials Science and Engineering: A, Vol. 724, pp. 536-546, 2018/05/02/, 2018.
[17] Orell, O., Vuorinen, J., Jokinen, J., Kettunen, H., Hytönen, P., Turunen, J. and Kanerva, M., “Characterization of Elastic Constants of Anisotropic Composites in Compression Using Digital Image Correlation“ Composite Structures, Vol. 185, pp. 176-185, 2018/02/01/, 2018.
[18] Sánchez-Arévalo, F. M. and Pulos, G., “Use of Digital Image Correlation to Determine the Mechanical Behavior of Materials“ Materials Characterization, Vol. 59, No. 11, pp. 1572-1579, 2008/11/01/, 2008.
[19] Claire, D., Hild, F. and Roux, S., “A Finite Element Formulation to Identify Damage Fields: The Equilibrium Gap Method“ International journal for numerical methods in engineering, Vol. 61, No. 2, pp. 189-208, 2004.
[20] Hedayati, N., Madoliat, R. and Hashemi, R., “Strain Measurement and Determining Coefficient of Plastic Anisotropy Using Digital Image Correlation (Dic)“ Mechanics & Industry, Vol. 18, No. 3, pp. 311, 2017.
[21] Peters, W. and Ranson, W., “Digital Imaging Techniques in Experimental Stress Analysis“ Optical engineering, Vol. 21, No. 3, pp. 213427, 1982.
[22] Tong, W., “Formulation of Lucas–Kanade Digital Image Correlation Algorithms for Non‐Contact Deformation Measurements: A Review“ Strain, Vol. 49, No. 4, pp. 313-334, 2013.
[23] Saranath, K. and Ramji, M., “Local Zone Wise Elastic and Plastic Properties of Electron Beam Welded Ti–6al–4v Alloy Using Digital Image Correlation Technique: A Comparative Study between Uniform Stress and Virtual Fields Method“ Optics and Lasers in Engineering, Vol. 68, pp. 222-234, 2015.
[24] Rahmatabadi, D., Tayyebi, M., Hashemi, R. and Faraji, G., “Microstructure and Mechanical Properties of Al/Cu/Mg Laminated Composite Sheets Produced by the Arb Proces“ International Journal of Minerals, Metallurgy, and Materials, Vol. 25, No. 5, pp. 564-572, 2018.
[25] Rahmatabadi, D. and Hashemi, R., “Experimental Evaluation of Forming Limit Diagram and Mechanical Properties of Nano/Ultra-Fine Grained Aluminum Strips Fabricated by Accumulative Roll Bonding“ International Journal of Materials Research, 2017.
[26] Jamaati, R. and Toroghinejad, M., “Cold Roll Bonding Bond Strengths: Review“ Materials Science and Technology, Vol. 27, No. 7, pp. 1101-1108, 2011.
[27] Valiev, R. Z., Islamgaliev, R. K. and Alexandrov, I. V., “Bulk Nanostructured Materials from Severe Plastic Deformation“ Progress in materials science, Vol. 45, No. 2, pp. 103-189, 2000.
[28] Pasebani, S. and Toroghinejad, M. R., “Nano-Grained 70/30 Brass Strip Produced by Accumulative Roll-Bonding (Arb) Process“ Materials Science and Engineering: A, Vol. 527, No. 3, pp. 491-497, 2010.
[29] Rahmatabadi, D., Tayyebi, M., Hashemi, R. and Eghbali, B., “Investigation of Mechanical Properties and Microstructure for Al/Cu/Sic Composite Produced by Cross Accumulative Roll Bonding Process“ Modares Mechanical Engineering, Vol. 17, No. 7, pp. 180-184, 2017.
[30] Motevalli, P. D. and Eghbali, B., “Microstructure and Mechanical Properties of Tri-Metal Al/Ti/Mg Laminated Composite Processed by Accumulative Roll Bonding“ Materials Science and Engineering: A, Vol. 628, pp. 135-142, 3/25/, 2015.
[31] tayyebi, m., Rahmatabadi, D., rashidi, r. and Hashemi, R., “Evaluation of Mechanical Properties and Microstructure for Al/Ni %5 Produced by Cross Accumulative Roll Bonding Process“ Journal of Science and Technology of Composites, Vol. 5, No. 2, pp. 279-288, 2018.
[32] tayyebi, M., Rahmatabadi, D. and Hashemi, R., “Review of Mechanical and Microstructural Properties of Aluminum Matrix Composites Reinforced with Ceramic Particles Produced by Spd Processes“ Journal of Science and Technology of Composites, pp. -, 2018.
[33] Rahmatabadi, D., Shahmirzaloo, A., Farahani, M. and Hashemi, R., “Characterization of the Plastic and Elastic Properties of Aluminum Sheet Produced by Crb Process Via Dic Method“ Modares Mechanical Engineering, Vol. 19, No. 2, pp. 505-513, 2019.
.