[1] Kang, I., Heung, Y. Y., Kim, J. H., Lee, J. W., Gollapudi, R., Subramaniam, S., Narasimhadevara, S., Hurd, D., Kirikera, G. R., Shanov, V., Schulz, M. J., Shi, D., Boerio, J., Mall, S. and Ruggles-Wren, M., “Introduction to Carbon Nanotube and Nanofiber Smart Materials“ Composites Part B: Engineering, Vol. 37, No. 6, pp. 382-394, 2006.
[2] Yu, M. F., Files, B. S., Arepalli, S. and Ruoff, R. S., “Tensile Loading of Ropes of Single Wall Carbon Nanotubes and Their Mechanical Properties“ Physical Review Letters, Vol. 84, No. 24, pp. 5552-5555, 2000.
[3] Setoodeh, A. R., Sokhandani, N. and Zebarjad, S. M., “Theoretical and experimental study on the effect of multi-walled carbonnanotubes on improving the tensile properties and toughness of Vinyl ester resin“ In Persion, Journal of Science and Technology of Composites, Vol. 5, No. 4, pp. 539-550, 2019.
[4] Tabatabaee-Ghomi, M., Taheri-Behrooz, F., Razavi, M. and Liaghat, G. H., “Electrical conductivity enhancement of Carbon/Epoxy composites using nanoparticles“ In Persion, Journal of Science and Technology of Composites, Vol. 5, No. 4, pp. 605-614, 2019.
[5] Hosseini Abbandanak, S. N., Siadati, M. H. and eslami-farsani, R., “Effects of functionalized graphene nanoplatelets on the flexural behaviors of basalt fibers/epoxy composites“ In Persion, Journal of Science and Technology of Composites, Vol. 5, No. 3, pp. 315-324, 2018.
[6] Khanna, S. K., Winter, R. M., Ranganathan, P., Yedla, S. B., Kalukanimuttam, M. and Paruchuri, K., “Sample Preparation Techniques for Nano-Mechanical Characterization of Glass Fiber Reinforced Polyester Matrix Composites“ Composites Part A: Applied Science and Manufacturing, Vol. 34, No. 1, pp. 53-65, 2003.
[7] Tanoglu, M., McKnight, S. H., Palmese, G. R. and Gillespie, J. W., “A New Technique to Characterize the Fiber/Matrix Interphase Properties under High Strain Rates“ Composites Part A: Applied Science and Manufacturing, Vol. 31, No. 10, pp. 1127-1338, 2000.
[8] Godara, A., Gorbatikh, L., Kalinka, G., Warrier, A., Rochez, O., Mezzo, L., Luizi, F., van Vuure, A. W., Lomov, S. V. and Verpoest, I., “Interfacial Shear Strength of a Glass Fiber/Epoxy Bonding in Composites Modified with Carbon Nanotubes“ Composites Science and Technology, Vol. 70, No. 9, pp. 1346-1352, 2010.
[9] Barber, A. H., Zhao, Q., Wagner, H. D. and Baillie, C. A., “Characterization of E-Glass-Polypropylene Interfaces Using Carbon Nanotubes as Strain Sensors“ Composites Science and Technology, Vol. 64, No. 13-14, pp. 1915-1919, 2004.
[10] Chowdhury, S. C., Haque, B. Z. G., Okabe, T. and Gillespie Jr, J. W., “Modeling the Effect of Statistical Variations in Length and Diameter of Randomly Oriented Cnts on the Properties of Cnt Reinforced Nanocomposites“ Composites Part B: Engineering, Vol. 43, No. 4, pp. 1756-1762, 2012.
[11] Joshi, U. A., Sharma, S. C. and Harsha, S. P., “Effect of Carbon Nanotube Orientation on the Mechanical Properties of Nanocomposites“ Composites Part B: Engineering, Vol. 43, No. 4, pp. 2063-2071, 2012.
[12] Mahdavi, M., Yousefi, E., Baniassadi, M., Karimpour, M. and Baghani, M., “Effective Thermal and Mechanical Properties of Short Carbon Fiber/Natural Rubber Composites as a Function of Mechanical Loading“ Applied Thermal Engineering, Vol. 117, pp. 8-16, 2017.
[13] El Moumen, A., Tarfaoui, M. and Lafdi, K., “Computational Homogenization of Mechanical Properties for Laminate Composites Reinforced with Thin Film Made of Carbon Nanotubes“ Applied Composite Materials, Vol. 25, No. 3, pp. 1-20, 2018.
[14] Ghasemi, A. R. and Hosseinpour, K., “Thermo-Magneto-Mechanical Long-Term Creep Behavior of Three-Phase Nano-Composite Cylinder “ Composites Science and Technology, Vol. 167, No.83 pp. 71-78, 2018.
[15] Zabihpoor, M. and Adibnazari, S., “A Micromechanics Approach for Fatigue of Unidirectional Fibrous Composites“ Iranian Polymer Journal (English Edition), Vol. 16, No. 4, pp. 219-232, 2007.
[16] Rahimi, G.H., Zamani, R. and Pol, M.H., “Studies on the tensile and flexural properties of TETA-cured epoxy resins modified with clay“ In Persion, Modares Mechanical Engineering, Vol. 14, No. 6, pp. 29-34, 2014.
[17] Papanicolaou, G. C., Michalopoulou, M. V. and Anifantis, N. K., “Thermal Stresses in Fibrous Composites Incorporating Hybrid Interphase Regions“ Composites Science and Technology, Vol. 62, No. 14, pp. 1881-1894, 2002.
[18] Riaño, L., Belec, L., Chailan, J. F. and Joliff, Y., “Effect of Interphase Region on the Elastic Behavior of Unidirectional Glass-Fiber/Epoxy Composites“ Composite Structures, Vol. 198, pp. 109-116, 2018.
[19] Azad, E., “Mechanical reinforcement on glass/fiber sizing “ MSc Thesis, Iran University of Science & Technology, Iran, 2016.
[20] El-Hage, H., Mallick, P. K. and Zamani, N., “A Numerical Study on the Quasi-Static Axial Crush Characteristics of Square Aluminum–Composite Hybrid Tubes“ Composite Structures, Vol. 73, No. 4, pp. 505-514, 2006.
[21] Lapczyk, I. and Hurtado, J. A., “Progressive Damage Modeling in Fiber-Reinforced Materials“ Composites Part A: Applied Science and Manufacturing, Vol. 38, No. 11, pp. 2333-2341,2007.
[22] Hbaieb, K., Wang, Q. X., Chia, Y. H. J. and Cotterell, B., “Modelling Stiffness of Polymer/Clay Nanocomposites“ Polymer, Vol. 48, No. 3, pp. 901-909, 2007.
[23] Wang, J., Crouch, S. L. and Mogilevskaya, S. G., “Numerical Modeling of the Elastic Behavior of Fiber-Reinforced Composites with Inhomogeneous Interphases“ Composites Science and Technology, Vol. 66, No. 1, pp. 1-18, 2006.