[1] Johnson, A. F. and Holzapfel, M., “Modelling soft body impact on composite structures,” Composite Structures, Vol. 61,pp. 103-113, 2003.
[2] Woo, S. C. and Choi, N. S., “Analysis of Fracture Process in Single-Edge-Notched Laminated Composites Based on the High Amplitude Acoustic Emission Events,” Composites Science and Technology, Vol. 67, pp. 1451-1458, 2007.
[3] Deka, L. J. and Bartus, S. D. and Vaidya, U. K., “Multi-site impact response of S2- glass/epoxy composite laminates,” Composites Science and Technology, Vol. 69, pp. 725-735, 2009
[4] Oskouei, A. and Ahmadi, M., “ Fracture Strength Distribution in E-Glass Fiber Using Acoustic Emission ,” Journal of Composite Materials, Vol . 44, No. 6, pp. 693-705, 2009
[5] Fotouhi, M. and Heydari, H. and Ahmadi, M. and Pashmforoush, F., “Characterization of Composite Materials Damage Under Quasi-Static Three-Point Bending Test Using Wavelet and Fuzzy C-means Clustering” In Persion, Journal of Composite Materials, Vol. 46, pp. 1795-1808, 2012.
[6] Oskouei, A. Heidary, H. Ahmadi, M. and Farajpur, M., “Unsupervised acoustic emission data clustering for the analysis of damage mechanisms in glass/polyester composites,” Materials & Design, Vol. 37, pp. 416-422, 2012.
[7] Naderi, S. and Bushroa, A. R., “Low-velocity impact damage of woven fabric composites: Finite element simulation and experimental verification,” Materials & Design, Vol. 53, pp. 706-718, 2014.
[8] Fotouhi, M. Ahmadi, M. and Hosseini Toudeshky, H., “Prediction of Delamination Growth in Laminated Composites Using Acoustic Emission and Cohesive Zone Modeling Techniques” Composite Structures, Vol. 124, pp. 120-127, 2015.
[9] Roshanfar, M., “Analysis of the separation between the progressive layer in composite layers under the effect of repetitive load,” In Persion, MSc Thesis, Amir kabir University, Iran, 2015.
[10] Refahi Oskouei, A. and Yousefi, J., “Characterization of residual strength in transversely loaded glasspolyester composites by acoustic emission and sentry function,” Materials Today, pp. 381-387, 2016.
[11] Saidane, E. H. Scida, D. Assarar, M. and Ayad, R., “Damag Mechanisms Assessment of Hybrid Flax-Glass Fiber Composites Using Acoustic Emission” Composite Structures, Vol. 175, pp. 1-11, 2017.
[12] Ghasemi-Ghalebahman, A. and Sayyar, H., “Failure mechanisms in open-hole laminated composites under tensile loading using acoustic emission,”In Persion, Composites Science and Technology, Vol. 5, pp. 143-152, 2017.
[13] Refahi Oskouei, A. and Zakizadeh, A. and Hamzehloo, R., “Investigation Impact Behavior of Composite Sandwich Panels Foam-Glass/Polyester Using Acoustic Emission,” In Persian, 3rd International Conference on Mechanical & Aerospace Engineering, 2018.
[14] Standard Test Method for Primary Calibration of Acoustic Emission Sensors, Annual Book of ASTM Standard, 2017.
[15] R.K. Miller and P. Mcintire, “Handbook of Nondestructive testing,” 2nd Edition, Vol.5 , Acoustic Emission, American Society for Nondestructive Testing, 1987
[16] Oskouei, A. and Ahmadi, M., “Acoustic emission characteristics of mode I delamination in glass/polyester composites,” Journal of Composite Materials, Vol. 44, No. 7, pp. 793-807, 2010.