[1] Srivastava, V. C., "An evaluation of desulfurization technologies for sulfur removal from liquid fuels", RSC Advances, Vol. 2, pp. 759–783, 2012.
[2] Sun, F. Wu, W. Wu, Z. Guo, J. Wei, Z. Yang, Y. Jiang, Z. Tian, F. and Li, C., "Dibenzothiophene hydrodesulfurization activity and surface sites of silica-supported MoP, Ni2P, and Ni–Mo–P catalysts", Journal of Catalysis, Vol. 228, pp. 298–310, 2004.
[3] Li, F. Liu, R. Wen, J. Zhao, D. Sun, Z. and Liu, Y., "Desulfurization of dibenzothiophene by chemical oxidation and solvent extraction with Me3NCH2C6H5Cl.2ZnCl2 ionic liquid", Green Chemistry, Vol. 11, pp. 883–888, 2009.
[4] Eber, J. Wasserscheid, P. and Jess, A., "Deep desulfurization of oil refinery streams by extraction with ionic liquids", Green Chemistry, Vol. 6, pp. 316–322, 2004.
[5] Li, J. Liu, X. Cao, C. Guo, J. and Pan, Z., "Silica-gel supported V complexes: preparation, characterization and catalytic oxidative desulfurization", Chinese Journal of Chemical Engineering, Vol. 21, pp. 860–866, 2013.
[6] Hernández-Maldonado, A. J. Yang, F. H. Qi, G. and Yang, R. T. "Desulfurization of transportation fuels by π-complexation sorbents: Cu (I), Ni(II), and Zn(II) zeolites", Applied Catalysis B: Environmental, Vol. 56, pp. 111–126, 2005.
[7] Takbiri, M. Mohamadi, T. and Pak, A. "Isolation of sulfur compounds from gasoline by evaporation process" In Persian, Iranian Chemical Chemistry and Chemical Engineering, Vol. 31, pp. 71–80, 2012.
[8] Shi, Y. Liu, G. Wang, L. and Zhang, X., "Efficient adsorptive removal of dibenzothiophene from model fuel over heteroatom doped porous carbon by carbonization of an organic salt", Chemical Engineering Journal, Vol. 259, pp. 771–778, 2015.
[9] Lim, S. H. Woo, E. J. Lee, H. and Lee, C. H., "Synthesis of magnetite-mesoporous silica composites as adsorbents for desulfurization from natural gas", Applied Catalysis B: Environmental, Vol. 85, pp. 71–76, 2008.
[10] Srivastav, A. and Srivastava, V. C., "Adsorptive desulfurization by activated alumina", Journal of Hazardous Materials, Vol. 170, pp. 1133–1140, 2009.
[11] Saedi, Z. Tangestaninejad, S. Moghadam, M. Mirkhani, V. and Mohammadpoor-Baltork, I., "MIL-101 metal organic framework: a highly efficient heterogeneouscatalyst for oxidative cleavage of alkenes with H2O2", Catalysis Communications, Vol. 17, pp. 18–22, 2012.
[12] Reddy, L. H. Arias, J. L. Nicolas, J. and Couvreur, P., "Magnetic nanoparticle design and characterization, toxicity and biocompatibility pharmaceutical and biomedical applications", Chemical Reviews, Vol. 112, pp. 5818–5887, 2012.
[13] Tavares, G. F. Xavier, M. R. Neri, D. F. M. and Oliveira, H. P., "Fe3O4@polypyrrole core-shell composites applied as nanoenvironment for galacto-oligosaccharides production", Chemical Engineering Journal, Vol. 306, pp. 816-825, 2016.
[14] Ershad langrodi, A. and Akaf, M. H. " Improvement of Mechanical Properties of Polyester Nanocomposites with Nanosilica Prepared by Sol Gel Method" In Persian, Iranian Chemical Chemistry and Chemical Engineering, Vol. 3, pp. 419–428, 2016.
[15] Ashnai ghasemi, F. Ghasemi, A. and Daneshpaie, S. "Investigation of the effect of titanium oxide nanoparticles on impact strength, tensile strength and elastic modulus of low density polypropylene / polyethylene base compounds " In Persian, Composite Science and Technology, Vol. 4, pp. 386–390, 2017.
[16] Gholami, H. Shakeri, E. and Mosavi, S. H. "Preparation and Evaluation of Properties of Polypropylene Nanoparticles of Zinc Oxide" In Persian, Composite Science and Technology, Vol. 2, pp. 7–12, 2015.
[17]
Bocchini, S.
Chiolerio, A.
Porro, S.
Accardo, D.
Garino, N.
Bejtka, K.
Perrone D. and
Pirri C. F. "Synthesis of polyaniline-based inks, doping thereof and test device printing towards electronic applications", Journal of Materials Chemistry C, Vol. 1, pp. 5101-5109, 2013.
[18] Xiong, L. Chen, F.-X. Yan, X.-M. Mei, P. J. "The adsorption of dibenzothiophene using activated carbon loaded with cerium",
Journal of Porous Materials, Vol. 19, pp. 713–719, 2012.
[19] Farzin Nejad, N. Shams, E. Amini, M. K. Bennett, J. C. "Synthesis of magnetic mesoporous carbon and its application for adsorption of dibenzothiophene",
Fuel Processing Technology, Vol. 106, pp. 376-384, 2013.
[20] Fayazi, M. Taher, M. A. Afzali D.and Mostafavi, A. "Removal of Dibenzothiophene Using Activated Carbon/γ-Fe2O3 Nano-Composite: Kinetic and Thermodynamic Investigation of the Removal Process", Analytical and Bioanalytical Chemistry Research,Vol. 2, pp. 72-83, 2015.
[21] Haji, S. Erkey, C. "Removal of Dibenzothiophene from Model Diesel by Adsorption on Carbon Aerogels for Fuel Cell Applications", Industrial & Engineering Chemistry Research, Vol. 42, pp. 6933–6937, 2003.
[22] Cheng, J. Jin, S. Zhang, R. Shao, X. Jin, M. " Enhanced adsorption selectivity of dibenzothiophene on ordered mesoporous carbon-silica nanocomposites via copper modification",
Microporous and Mesoporous Materials, Vol. 212, pp. 137-145, 2015.