[1] Golparvar, M. and Fasihi, M., "Investigation of mechanical properties of polypropylene-based hybrid nanocomposites using experimental design". In Persian, Journal of Science and Technology of Composites, In press. 2018.
[2] Esmaili, P., Azdast, T., Doniavi, A., Hasanzadeh, R., Mamaghan, S., and Lee, R.E., "Experimental investigation of mechanical properties of injected polymeric nanocomposites containing multi-walled carbon nanotubes according to design of experiments". In Persian, Journal of Science and Technology of Composites, Vol 2, No 3: pp. 67-74. 2015.
[3] Avazverdi, E., Vandalvand, M., and Shakeri, A., "The Mechanical Properties of Recycled Polyethylene-Polyethylene Terephthalate Composites". In Persian, Iranian Journal of Polymer Science and Technology, Vol 27, No 6: pp. 389-381. 2015.
[4] Habibi, S. and Elhami, M., "A Study on morphology of Poly(vinyl alcohol)- organoclay nanocomposite nanofibers". In Persian, Journal of Science and Technology of Composites, In press. 2018.
[5] Sahraeian, R., Esmizadeh, E., Esfandeh, M., Naderi, G., and Dubios, C., "Hybrid Effect of Nanoperlite and Nanoclay on Mechanical and Rheological Properties of Low-Density Polyethylene". Journal of Polymer & Composites, Vol 6, No 1. 2018.
[6] Sahraeian, R., Hashemi, S.A., Esfandeh, M., and Ghasemi, I., "Preparation of nanocomposites based on LDPE/Perlite: mechanical and morphological studies". Polymers & Polymer Composites, Vol 20, No 7: pp. 639. 2012.
[7] Irani, A.E.S., "Multiscale modeling of fracture in polymer nanocomposite reinforced by intact and functionalized CNTs". In Persian, Journal of Science and Technology of Composites, Vol 4, No 1: pp. 35-46. 2017.
[8] Sahebian, S., Zebarjad, S.M., and Sajjadi, S.A., "The Effect of Temperature and Nano-sized Calcium Carbonate on Tensile Properties of Medium Density Polyethylene". In Persian, Iranian Journal of Polymer Science and Technology, Vol 21, No 2: pp. 133-140. 2008.
[9] Rashmi, D., Tambe, S.P., Singh, S.K., Raja, V.S., and Kumar, D., "Thermally sprayable grafted LDPE/nanoclay composite coating for corrosion protection". Surface and Coatings Technology, Vol 205, No 23-24: pp. 5470-5477. 2011.
[10] Esmizadeh, E., Naderi, G., Ghoreishy, M.H.R., and Bakhshandeh, G.R., "Effect of Mixing Conditions on Mechanical and Physical Properties of Nanocomposites Based on NBR/PVC/Nanoclay". In Persian, Iranian Journal of Polymer Science and Technology, Vol 23, No 4: pp. 293-304. 2010.
[11] Karimpoor, M.H., "Applied Environmental Geology". Javid Publications of Iran, Vol, No: pp. 404. 1988.
[12] Sahraeian, R. and Esfandeh, M., "Mechanical and morphological properties of LDPE/perlite nanocomposite films". Polymer Bulletin, Vol 74, No 4: pp. 1327-1341. 2017.
[13] Sahraeian, R., Esfandeh, M., and Hashemi, S.A., "Rheological, Thermal and Dynamic Mechanical Studies of the LDPE/Perlite Nanocomposites". Polymers & Polymer Composites, Vol 21, No 4: pp. 243. 2013.
[14] Esmizadeh, E., Naderi, G., Yousefi, A.A., and Milone, C., "Thermal and Morphological Study of Epoxy Matrix with Chemical and Physical Hybrid of Nanoclay/Carbon Nanotube". JOM, Vol 68, No 1: pp. 362-373. 2016.
[15] Esmizadeh, E., Naderi, G., and Paran, S.M.R., "Preparation and characterization of hybrid nanocomposites based on NBR/Nanoclay/Carbon black". Polymer Composites, Vol 38, No S1: pp. E181-E188. 2017.
[16] Hotta, S. and Paul, D.R., "Nanocomposites formed from linear low density polyethylene and organoclays". Polymer, Vol 45, No 22: pp. 7639-7654. 2004.
[17] Ghoreishy, M.H.R., "Simulating Mechanical Behavior of a Tread Rubber Compound by a Hyperelastic/Hysteresis Model". In Persian, Iranian Journal of Polymer Science and Technology, Vol 24, No 5: pp. 369-377. 2013.
[18] Rafei, M.H.R.G.G.N.M., "A Theoretical and Experimental Investigation of Mechanical Behavior of Steel-Rubber Long Fiber Composites Using Finite Element Method and Analytical Models". In Persian, Iranian Journal of Polymer Science and Technology, Vol 29, No 2: pp. 139-155. 2016.
[19] Ghasemi, I., Karrabi, M., and Ghorieshy, M.H.R., "Investigation into stress-strain behaviour of organoclay SBR composite using different constitutive models". Plastics, rubber and composites, Vol 37, No 7: pp. 305-310. 2008.
[20] Austrell, P.E. and Kari, L. A Constitutive Model for the fatigue life prediction of rubber. in Constitutive Models for Rubber IV: Proceedings of the Fourth European Conference on Constitutive Models for Rubber, ECCMR 2005, Stockholm, Sweden, 27-29 June 2005. 2005. Taylor & Francis.
[21] Dorfmann, A. and Muhr, A. Material law selection in the finite element simulation of rubber-like materials and its practical application in the industerial design process. in Constitutive Models for Rubber: Proceedings of the First European Conference on Constitutive Models for Rubber, Vienna, Austria, 9-10 September 1999. 1999. Balkema.
[22] Ali, A., Hosseini, M., and Sahari, B.B., "A review and comparison on some rubber elasticity models". Journal of Scientific & Industrial Research, Vol 69, No 7: pp. 495-500. 2010.
[23] Duncan, B.C., Crocker, L.E., and Urquhart, J.M., Evaluation of hyperelastic Finite Element models for flexible adhesive joints. 2000: National Physical Laboratory.
[24] Korochkina, T.V., Claypole, T.C., and Gethin, D.T. Choosing constitutive models for elastomers used in printing processes. in Constitutive Models for Rubber IV: Proceedings of the Fourth European Conference on Constitutive Models for Rubber, ECCMR 2005, Stockholm, Sweden, 27-29 June 2005
[25] Ghosh, P., Saha, A., and Mukhopadhyay, R. Prediction of tyre rolling resistance using FEA. in Constitutive Models for Rubber III: Proceedings of the Third European Conference on Constitutive Models for Rubber, London, UK, 15-17 September 2003. 2003. Balkema.
[26] Peng-Cheng, M., Ming-Yang, L., Hao, Z., Sheng-Qi, W., Rui, W., Kai, W., Yiu-Kei, W., Ben-Zhong, T., Soon-Hyung, H., and Kyung-Wook, P., "Enhanced electrical conductivity of nanocomposites containing hybrid fillers of carbon nanotubes and carbon black". ACS applied materials & interfaces, Vol 1, No 5: pp. 1090-1096. 2009.
[27] Esmizadeh, E., Naderi, G., and Barmar, M., "Effect of organo-clay on properties and mechanical behavior of Fluorosilicone rubber". Fibers and Polymers, Vol 15, No 11: pp. 2376-2385. 2014.
[28] Khonakdar, M.M.-T.S.H.J.H.A., "A Comparative Study on the Influence of Nanoalumina and Carbon Nanotubes on Thermal Stability, Adhesion Strength and Morphology of Epoxy Adhesives". In Persian, Iranian Journal of Polymer Science and Technology, Vol 27, No 6: pp. 369-361. 2015.
[29] Jafari, S.H., Kalati-Vahid, A., Khonakdar, H.A., Asadinezhad, A., Wagenknecht, U., and Jehnichen, D., "Crystallization and melting behavior of nanoclay-containing polypropylene/poly (trimethylene terephthalate) blends". eXPRESS Polymer Letters, Vol 6, No 2. 2012.
[30] Vahidifar, A., Khorasani, S., Park, C.B., Khonakdar, H.A., Reuter, U., Naguib, H.E., and Esmizadeh, E., "Towards the development of uniform closed cell nanocomposite foams using natural rubber containing pristine and organo-modified nanoclays". RSC Advances, Vol 6, No 59: pp. 53981-53990. 2016.
[31] Esmizadeh, E., Naderi, G., Ghoreishy, M.H.R., and Bakhshandeh, G.R., "Chemical and physical properties of self-crosslinked poly (vinyl chloride)/nitrile rubber nanocomposites prepared by melt-mixing process". Journal of Polymer Engineering, Vol 31, No 2-3: pp. 83-92. 2011.
[32] Hashemi, S.A., Arabi, H., Ahmadi, S., Sahraeian, R., and Khatibi, M.A., "The influence of dimethyl hydrogen siloxane on polypropylene-straw fibres interface". Vol, No. 2006.
[33] Boyce, M.C. and Arruda, E.M., "Constitutive models of rubber elasticity: a review". Rubber chemistry and technology, Vol 73, No 3: pp. 504-523. 2000.