[1] Ashori, A. and Bahreini, Z., “Evaluation of Calotropis Gigantea as a Promising Raw Material for Fiber-Reinforced Composite“ Journal of Composite Materials, Vol. 43, No. 11, pp. 1297-1304, 2009.
[2] Al-Maadeed, M., Shabana, Y. M. and Khanam, P. N., “Processing, Characterization and Modeling of Recycled Polypropylene/Glass Fibre/Wood Flour Composites“ Materials & Design, Vol. 58, pp. 374-380, 2014.
[3] Bajracharya, R. M., Manalo, A. C., Karunasena, W. and Lau, K.-t., “An Overview of Mechanical Properties and Durability of Glass-Fibre Reinforced Recycled Mixed Plastic Waste Composites“ Materials & Design (1980-2015), Vol. 62, pp. 98-112, 2014.
[4] Nourbakhsh, A. and Ashori, A., “Wood Plastic Composites from Agro-Waste Materials: Analysis of Mechanical Properties“ Bioresource technology, Vol. 101, No. 7, pp. 2525-2528, 2010.
[5] Welle, F., “Twenty Years of Pet Bottle to Bottle Recycling—an Overview“ Resources, Conservation and Recycling, Vol. 55, No. 11, pp. 865-875, 2011.
[6] Ge, Z., Huang, D., Sun, R. and Gao, Z., “Properties of Plastic Mortar Made with Recycled Polyethylene Terephthalate“ Construction and Building Materials, Vol. 73, pp. 682-687, 2014.
[7] Lei, Y. and Wu, Q., “Wood Plastic Composites Based on Microfibrillar Blends of High Density Polyethylene/Poly (Ethylene Terephthalate)“ Bioresource technology, Vol. 101, No. 10, pp. 3665-3671, 2010.
[8] Rahman, K. S., Islam, M. N., Rahman, M. M., Hannan, M. O., Dungani, R. and Khalil, H. A., “Flat-Pressed Wood Plastic Composites from Sawdust and Recycled Polyethylene Terephthalate (Pet): Physical and Mechanical Properties“ SpringerPlus, Vol. 2, No. 1, pp. 629, 2013.
[9] Lei, Y. and Wu, Q., “High Density Polyethylene and Poly (Ethylene Terephthalate) in Situ Sub-Micro-Fibril Blends as a Matrix for Wood Plastic Composites“ Composites Part A: Applied Science and Manufacturing, Vol. 43, No. 1, pp. 73-78, 2012.
[10] Shahrajabian, H., and Maleki, A.R., “Investigation of the Physical and Mechanical Properties of Wood Plastic Composites Based on High Density Polyethylene/ Polypropylene/Recycled Poly (ethylene terephthalate)” In Persian, Journal of Science and Technology of Composites, Vol. *, No. *, pp. *-*, **.
[11] Soury, E., Behravesh, A., Esfahani, E. R. and Zolfaghari, A., “Design, Optimization and Manufacturing of Wood–Plastic Composite Pallet“ Materials & Design, Vol. 30, No. 10, pp. 4183-4191, 2009.
[12] Jafari, M. and Rohani, A., “Optimization of Perforated Composite Plates under Tensile Stress Using Genetic Algorithm“ Journal of Composite Materials, Vol. 50, No. 20, pp. 2773-2781, 2016.
[13] Shah, P., Halls, V., Zheng, J. and Batra, R., “Optimal Cure Cycle Parameters for Minimizing Residual Stresses in Fiber-Reinforced Polymer Composite Laminates“ Journal of Composite Materials, Vol. 0, No. 0, pp. 0021998317714317.
[14] Shahbazi karami, J., Sheikhi, M.M., Manafi, D., and Chaechi, O., “Optimization of Internal Pressure and Axial Feed in Metal composite Al-Cu Tubes Hydroforming Process with Genetic Algorithm” In Persian, Journal of Science and Technology of Composites, Vol. 4, No. 3, pp. 275-282, 2017.
[15] Mojabi, Sh.S., and Kheirikhah, M.M., “Modeling and Intelligent Control of Vibration of Cantilever Composite Plate Embedded with Shape Memory Alloy Wires” In Persian, Journal of Science and Technology of Composites, Vol. 4, No. 4, pp. 363-374, 2018.
[16] Shokrieh, M.M., Damirchiloo, S., and Salamat-talab, M., “Determination of Cohesive Zone Oarameters in Mode Idelamination Growth of a Double Cantilever Beam Specimen Using Inverse Method” In Persian, Journal of Science and Technology of Composites, Vol. 4, No. 1, pp. 83-90, 2017.
[17] Bhowmik, S. and Ray, A., “Prediction and Optimization of Process Parameters of Green Composites in Awjm Process Using Response Surface Methodology“ The International Journal of Advanced Manufacturing Technology, Vol. 87, No. 5-8, pp. 1359-1370, 2016.
[18] Vahdatazad, N., Ebrahimi, S., and Liaghat Gh., “Oblique Crashworthiness Optimization and Sensitivity Analysis of Tapered Sandwich Columns” In Persian, Journal of Science and Technology of Composites, Vol. 4, No. 1, pp. 25-34, 2017.
[19] Rao, S., Sethi, A., Das, A. K., Mandal, N., Kiran, P., Ghosh, R., Dixit, A. and Mandal, A., “Fiber Laser Cutting of Cfrp Composites and Process Optimization through Response Surface Methodology“ Materials and Manufacturing Processes, pp. 1-10, 2017.
[20] Shahrajabian, H. and Farahnakian, M., “Modeling and Multi-Constrained Optimization in Drilling Process of Carbon Fiber Reinforced Epoxy Composite“ International Journal of Precision Engineering and Manufacturing, Vol. 14, No. 10, pp. 1829-1837, October 01, 2013.
[21] Deb, K., “An Efficient Constraint Handling Method for Genetic Algorithms“ Computer methods in applied mechanics and engineering, Vol. 186, No. 2, pp. 311-338, 2000.