[1] Shafiei-Zarghani, A., Kashani-Bozorg, S.F. and Zarei-Hanzaki, A., ''Microstructures and Mechanical Properties of Al/Al2O3 Surface Nano-Composite Layer Produced by Friction Stir Processing'', Materials Science and Engineering A, Vol. 500, No. 1-2, pp. 84-91, 2009.
[2] Ahmadifard, S., Shahin, N., Kazemi, S., Heidarpour, A. and Shirazi, A., “Fabrication of A5083/SiC Surface Composite by Friction Stir Processing and its Characterization”, Journal of Science and Technology of Composites, Vol. 2, No. 4, pp. 31-36, 2016. (In Persian)
[3] Besharati Givi, M. K., Faraji, G. and Asadi, P., ''Fabrication of Fine Grained Magnesium Matrix Composite by FSP Method'' 10th international conference of manufacturing engineering of Iran, March 2010. (In Persian)
[4] Faraji, G. and Asadi, P., ''Characterization of AZ91/alumina Nanocomposite Produced by FSP'', Materials Science and Engineering A, Vol. 528, No. 6, pp. 2431-2440, 2011.
[5] Azizeh, M., Kokabi, A. H. and Abachi, P., ''Effect of Rotational Speed and Probe Profile on Microstructure and Hardness of AZ31/Al2O3 Nanocomposites Fabricated by Friction Stir Processing'', Materials and Design, Vol. 32, No. 32, pp. 2034–2041, 2011.
[6] Ahmadalidokht, S., Abdolahzadeh, A., Soleymani, S. and Asadi, H.,''Investigating the Wear Behaviour of Hybrid Aluminum Based Composite Produced by FSP'', 5th conference of metalurgy engineering of Iran, 2012. (In Persian)
[7] Khayyamin, D., Mostafapour, A. and Keshmiri, R.,''The Effect of Process Parameters on Microstructural Characteristics of AZ91/SiO2 Composite Fabricated by FSP'', Materials Science & Engineering A, Vol. 559, pp. 217–221, 2013.
[8] Solbi, E. and Kashani Bozorg, F., ''Investigating the Mechanical Properties of Nano Surface AZ31/TiC Composite Produced by FSP Method'', Paper of material and advanced technologies, Vol 2, No 4, 2014 (In Persian)
[9] Dadaei Dehkordi, M., Alimirzaei, F. and Omidvar, H., ''Investigation of Fracture in AZ91 Based Surface Composite Produced by FSP'', 2nd Annual national conference of mechanical engineering and industrial strategies, 2016. (In Persian)
[10] Dutta Majumdar, J., Ramesh Chandra, B., Galun, R., Mordike, B. L. and Manna, I., ''Laser Composite Surfacing of a Magnesium Alloy with Silicon Carbide'', Composites Science and Technology, Vol. 63, No. 6, pp. 771–778, 2003.
[11] Dutta Majumdar, J., Ramesh Chandra, B. and Manna, I., ''Friction and Wear Behavior of Laser Composite Surfaced Aluminium with Silicon Carbide'', Wear, Vol. 262, No. 5-6, pp. 641–648, 2007.
[12] Zheng, B. J., Chen, X. M. and Lian, J. S., ''Microstructure and Wear Property of Laser Cladding Al+SiC Powders on AZ91D Magnesium Alloy'', Optics and Lasers in Engineering, Vol. 48, No. 5, pp. 526–532, 2010.
[13] Vaziri, S. A., Shahverdi, H. R., Shabestari, S. G. Hazeli, K. and Torkamany, M. J., ''Effect of Re-scanning on Tribological Characterization of Laser Surface Alloyed Layers'', Materials and Design, Vol. 31, No. 8, pp. 3875–3879, 2010.
[14] Lin, P., Zhang, Zh. and Ren, L., ''The Mechanical Properties and Microstructures of AZ91D Magnesium Alloy Processed by Selective Laser Cladding with Al Powder'', Optics &Laser Technology, Vol. 60 pp. 61–68, 2014.
[15] Zhang, Zh., Lin, P. and Ren, L., ''Wear Resistance of AZ91D Magnesium Alloy Processed by Improved Laser Surface Remelting'', Optics and Lasers in Engineering, Vol. 55, pp. 237–242, 2014.
[16] Taltavull, C., López, A. J., Torres, B. and Rams, J., ''Dry Sliding Wear Behaviour of Laser Surface Melting Treated AM60B Magnesium Alloy'', Surface & Coatings Technology, Vol. 236, pp. 368–379, 2013.
[17] Meng, G., Yue, T. M., Lin, X., Yang, H., Xie, H. and Ding, X., ''Laser Surface Forming of AlCoCrCuFeNi Particle Reinforced AZ91D Matrix Composites'', Optics & Laser Technology, Vol. 70, pp. 119–127, 2015.
[18] Ren, X. D., Huang, J. J., Zhou, W. F., Xu, S. D. and Liu, F. F., ''Surface nano-crystallization of AZ91D magnesium alloy induced by laser shock processing'', Materials and Design, Vol. 86 , pp. 421–426, 2015.
[19] Riquelme, A., Rodrigo, P., Dolores Escalera-Rodríguez, M. and Rams, J., ''Analysis and Optimization of Process Parameters in Al–SiCp Laser Cladding'', Optics and Lasers in Engineering, Vol. 78, pp. 165–173, 2016.
[20] Yazdi, R. and Kashani Bozorg, F., ''Pure Titanium Surface Alloying with BN Powder by Using TIG Method'', 7th national seminar of surface engineering and heat treatment, 2006. (in Persian فارسی)
[21] Elahi, M. R., Heydarzadeh Sohi, M. and Safaei, A., ''Liquid Phase Surface Alloying of AZ91D Magnesium Alloy with Al and Ni Powders'', Applied Surface Science, Vol. 258, No. 15, pp. 5876– 5880, 2012.
[22] Lotfi, B., Rostami, M. and Sadeghian, Z., ''Effect of Silicon Content on Microstructure of Al−Si/SiCp Composite Layer Cladded on A380 Al Alloy by TIG Welding Process'', Transactions of Nonferrous Metals Society of China, Vol. 24, No. 9, pp. 2824−2830, 2014.
[23] Mazaheri, H., Fazel Najafabadi, M. and Alaei. A., “Study of Microstructure and Tribological Behavior of the Composite Layer Produced of Silicon Carbide Particles on a Steel ASTM A106 GTAW Welding Method” Journal of Science and Technology of Composites, Vol. 2, No. 1, pp. 65−72, 2015. (In Persian)
[24] Schneider, C. and Enzinger, N., ''Characterisation of Interface of Steel/Magnesium FSW'', Science and Technology of Welding & Joining, Vol. 16, No. 1, pp. 100-107, 2013.
[25] Mohammadi, S., Jabbari, A. H. and Sedighi, M., “Mechanical Properties and Microstructure of Mg-SiCp Composite Sheets Fabricated by Sintering and Warm Rolling”, Journal of Materials Engineering and Performance, Vol. 26, No. 7, pp. 3410-3419, 2017.
[26]Archard, J. F., ''Contact and Rubbing of Flat Surfaces", Journal of Applied Physics, Vol 24, No 8, pp. 981-988, 1953.
[27] Srinivasan, M., Loganathan, C., Kamaraj, M., Nguyen, Q. B., Gupta, M. and Narayanasamy, R., ''Sliding wear Behaviour of AZ31B Magnesium Alloy and Nano-Composite'', Transactions of Nonferrous Metals Society of China, Vol. 22, No. 1, pp. 60-65, 2012.