[1] Jamaati, R., Toroghinejad, M. R. and Najafizadeh, A., “An Alternative Method of Processing Mmcs by Car Process“ Materials Science and Engineering: A, Vol. 527, No. 10, pp. 2720-2724, 2010.
[2] Lee, D. and Kim, B., “Nanostructured Cu–Al 2 O 3 Composite Produced by Thermochemical Process for Electrode Application“ Materials Letters, Vol. 58, No. 3, pp. 378-383, 2004.
[3] Alizadeh, M. and Salahinejad, E., “A Comparative Study on Metal–Matrix Composites Fabricated by Conventional and Cross Accumulative Roll-Bonding Processes“ Journal of Alloys and Compounds, Vol. 620, No. 1, pp. 180-184, 2015.
[4] Alizadeh, M., “Comparison of Nanostructured Al/B 4 C Composite Produced by Arb and Al/B 4 C Composite Produced by Rrb Process“ Materials Science and Engineering: A, Vol. 528, No. 2, pp. 578-582, 2010.
[5] Ruppert, M., Höppel, H. W. and Göken, M., “Influence of Cross-Rolling on the Mechanical Properties of an Accumulative Roll Bonded Aluminum Alloy Aa6014“ Materials Science and Engineering: A, Vol. 597, No. 1, pp. 122-127, 2014.
[6] Alizadeh, M., “Processing of Al/B4c Composites by Cross-Roll Accumulative Roll Bonding“ Materials Letters, Vol. 64, No. 23, pp. 2641-2643, 2010.
[7] Alizadeh, M. and Paydar, M. H., “High-Strength Nanostructured Al/B4c Composite Processed by Cross-Roll Accumulative Roll Bonding“ Materials Science and Engineering: A, Vol. 538, No. 1, pp. 14-19, 2012.
[8] Naseri, M., Hassani, A. and Tajally, M., “An Alternative Method for Manufacturing Al/B4c/Sic Hybrid Composite Strips by Cross Accumulative Roll Bonding (Carb) Process“ Ceramics International, Vol. 41, No. 10, pp. 13461-13469, 2015.
[9] Alizadeh, M. and Salahinejad, E., “Processing of Ultrafine-Grained Aluminum by Cross Accumulative Roll-Bonding“ Materials Science and Engineering: A, Vol. 595, No. 2, pp. 131-134, 2014.
[10] Verstraete, K., Helbert, A. L., Brisset, F., Benoit, A., Paillard, P. and Baudin, T., “Microstructure, Mechanical Properties and Texture of an Aa6061/Aa5754 Composite Fabricated by Cross Accumulative Roll Bonding“ Materials Science and Engineering: A, Vol. 640, No. 7, pp. 235-242, 2015.
[11] D. Rahmatabadi, M. Tayyebi, R. Hashemi, B. Eghbali, Investigation of mechanical properties and microstructure for Al/Cu/SiC composite produced by Cross Accumulative Roll Bonding process, Modares Mechanical Engineering, Vol. 17, No. 7, pp. 180-184, 2017.
[12] Alizadeh, M., “Comparison of Nanostructured Al/B4c Composite Produced by Arb and Al/B4c Composite Produced by Rrb Process“ Materials Science and Engineering: A, Vol. 528, No. 2, pp. 578-582, 2010.
[13] Rahmatabadi, D., Hashemi, R., Mohammadi, B. and Shojaee, T., “Experimental Evaluation of the Plane Stress Fracture Toughness for Ultra-Fine Grained Aluminum Specimens Prepared by Accumulative Roll Bonding Process“ Materials Science and Engineering: A, Vol. 708, No. 2, pp. 301-310, 2017.
[14] Rahmatabadi, D. and Hashemi, R., “Experimental Evaluation of Forming Limit Diagram and Mechanical Properties of Nano/Ultra-Fine Grained Aluminum Strips Fabricated by Accumulative Roll Bonding“ International Journal of Materials Research, 2017.
[15] Quadir, M., Wolz, A., Hoffman, M. and Ferry, M., “Influence of Processing Parameters on the Bond Toughness of Roll-Bonded Aluminium Strip“ Scripta Materialia, Vol. 58, No. 11, pp. 959-962, 2008.
[16] Mehr, V. Y., Rezaeian, A. and Toroghinejad, M. R., “Application of Accumulative Roll Bonding and Anodizing Process to Produce Al–Cu–Al 2 O 3 Composite“ Materials & Design, Vol. 70, No. 2, pp. 53-59, 2015.
[17] Xing, Z., Kang, S. and Kim, H., “Structure and Properties of Aa3003 Alloy Produced by Accumulative Roll Bonding Process“ Journal of materials science, Vol. 37, No. 4, pp. 717-722, 2002.
[18] Motevalli, P. D. and Eghbali, B., “Microstructure and Mechanical Properties of Tri-Metal Al/Ti/Mg Laminated Composite Processed by Accumulative Roll Bonding“ Materials Science and Engineering: A, Vol. 628, No. 3, pp. 135-142, 2015.
[19] Dehsorkhi, R. N., Qods, F. and Tajally, M., “Investigation on Microstructure and Mechanical Properties of Al–Zn Composite During Accumulative Roll Bonding (Arb) Process“ Materials Science and Engineering: A, Vol. 530, No. 1, pp. 63-72, 2011.
[20] Shabani, A., Toroghinejad, M. R. and Shafyei, A., “Fabrication of Al/Ni/Cu Composite by Accumulative Roll Bonding and Electroplating Processes and Investigation of Its Microstructure and Mechanical Properties“ Materials Science and Engineering: A, Vol. 558, No. 1, pp. 386-393, 2012.
[21] Eizadjou, M., Talachi, A. K., Manesh, H. D., Shahabi, H. S. and Janghorban, K., “Investigation of Structure and Mechanical Properties of Multi-Layered Al/Cu Composite Produced by Accumulative Roll Bonding (Arb) Process“ Composites Science and Technology, Vol. 68, No. 9, pp. 2003-2009, 2008.
[22] Mozaffari, A., Manesh, H. D. and Janghorban, K., “Evaluation of Mechanical Properties and Structure of Multilayered Al/Ni Composites Produced by Accumulative Roll Bonding (Arb) Process“ Journal of Alloys and Compounds, Vol. 489, No. 1, pp. 103-109, 2010.
[23] Alizadeh, M. and Samiei, M., “Fabrication of Nanostructured Al/Cu/Mn Metallic Multilayer Composites by Accumulative Roll Bonding Process and Investigation of Their Mechanical Properties“ Materials & Design, Vol. 56, No. 1, pp. 680-684, 2014.
[24] D. Rahmatabadi, R. Hashemi, Experimental investigation of fracture surfaces and mechanical properties of AA1050 aluminum produced by accumulative roll bonding process, Modares Mechanical Engineering, Vol. 16, No. 10, pp. 305-312, 2016.
[25] Alizadeh, M. and Paydar, M., “Fabrication of Nanostructure Al/Sic P Composite by Accumulative Roll-Bonding (Arb) Process“ Journal of Alloys and Compounds, Vol. 492, No. 1, pp. 231-235, 2010.
[26] Jamaati, R., Naseri, M. and Toroghinejad, M. R., “Wear Behavior of Nanostructured Al/Al2o3 Composite Fabricated Via Accumulative Roll Bonding (Arb) Process“ Materials & Design, Vol. 59, No.1, pp. 540-549, 2014.
[27] Ardakani, M. R. K., Amirkhanlou, S. and Khorsand, S., “Cross Accumulative Roll Bonding—a Novel Mechanical Technique for Significant Improvement of Stir-Cast Al/Al2o3 Nanocomposite Properties“ Materials Science and Engineering: A, Vol. 591, No. 1, pp. 144-149, 2014.
[28] Kamali Ardakani, M. R., Khorsand, S., Amirkhanlou, S. and Javad Nayyeri, M., “Application of Compocasting and Cross Accumulative Roll Bonding Processes for Manufacturing High-Strength, Highly Uniform and Ultra-Fine Structured Al/Sicp Nanocomposite“ Materials Science and Engineering: A, Vol. 592, No. 1, pp. 121-127, 2014.