[1]
Lee, S. T. and Ramesh, N. S., “Polymeric Foams: Mechanisms and Materials” CRC Press, 2004.
|
[2]
|
Shen, J. Zeng, C. and Lee, L. J., “Synthesis of Polystyrene–Carbon Nanofibers Nanocomposite Foams” Journal of polymer, Vol. 46, No. 14, pp. 5218-5224, 2005.
|
[3]
|
Leung, S. N. Park, C. B. and Li, H., “Effects of Nucleating Agents’ Shapes and Interfacial Properties on Cell Nucleation” Journal of Cellular Plastics, Vol. 46, No. 5, pp. 441-460, 2010.
|
[4]
|
Bao, J. B. Liu, T. Zhao, L. Hu, G. H. Miao, X. and Li, X., “Oriented Foaming of Polystyrene with Supercritical Carbon dioxide for Toughening” Journal of Polymer, Vol. 53, No. 25, pp. 5982-5993, 2012.
|
[5]
|
Zakiyan, S. E. Famili, M. H. N. and Ako, M., “Heterogeneous Nucleation in Batch Foaming of Polystyrene in Presence of Nanosilica as a Nucleating Agent” Iranian Journal of Polymer Science and Technology, In Persian, Vol. 25, No. 3, pp. 231-240, 2012.
|
[6]
|
Chen, L. Rende, D. Schadler, L. S. and Ozisikb, R., “Polymer nanocomposite foams” Journal of Mater Chemistry A, Vol. 1, No. 12, pp. 3837–3850, 2013.
|
[7]
|
Zakiyan, S. E. Famili, M. H. N. and Ako, M., “Controlling Foam Morphology of Polystyrene via Surface Chemistry, Size and Concentration of Nanosilica Particles” Journal of Mater Science, Vol. 49, No. 18, pp. 6225-6239, 2014.
|
[8]
|
Liao, R. Yu, W. and Zhou, C., “Rheological Control in Foaming Polymeric Materials: I. Amorphous Polymers” Journal of Polymer, Vol. 51, No. 2, pp. 568-580, 2010.
|
[9]
|
Ershad-Langroudi, A. and Akkaf, M. H., “Improvement in the Mechanical Properties of Polyester Nanocomposite with Nano-silica Prepared by Sol-gel Method” Journal of Science and Technology of Composites, In Persian, Vol. 3, No. 4, pp. 419-428, 2017.
|
[10]
|
Zhai, W. Yu, J. Wu, L. Ma, W. and He, J., “Heterogeneous Nucleation Uniformizing Cell Size Distribution in Microcellular Nanocomposites Foams” Journal of Polymer, Vol. 47, No. 21, pp. 7580-7589, 2006.
|
[11]
|
Vaziri, H. S. Omaraei, I. A. Abadyan, M. R. Mortezaei, M. and Yousefi, N., “Thermophysical and Rheological Behavior of Polystyrene/silica Nanocomposites: Investigation of Nanoparticle Content” Journal of Materials and Design, Vol. 32, No. 8, pp. 4537-4542, 2011.
|
[12]
|
Mortezaei, M. Famili, M. H. N. and Kokabi, M., “The Role of Interfacial Interactions on the Glass-Transition and Viscoelastic Properties of Silica/Polystyrene Nanocomposite” Journal of Composites Science and Technology, Vol. 71, No. 8, pp. 1039-1045, 2011.
|
[13]
|
Doroudiani, S. and Kortschot, M. T., “Polystyrene Foams. I. Processing-Structure Relationships” Journal of Applied Polymer Science, Vol. 90, No. 5, PP. 1412-1420, 2003.
|
[14]
|
Pop-Iliev, R. Dong, N. Xu, D. and Park, C. B., “Visualization of the Foaming Mechanism of Polyethylene Blown by Chemical Blowing Agents under Ambient Pressure” Advances in Polymer Technology, Vol. 26, No. 4, PP. 213-222, 2007.
|
[15]
|
Mohebbi, A. Mehrabani-Zeinabad, A. and Famili, M. H. N., “Dynamic Behavior of Nucleation in Supercritical N2 Foaming of Polystyrene-Aluminum Oxide Nanocomposite” Journal of Polymer Science A, Vol. 53, No. 11, pp. 1076-1085, 2011.
|
[16]
|
Gendron, R., “Thermoplastic Foam Processing: Principles and Development” CRC Press, 2004.
|
[17]
|
Kim, S. G. Leung, S. N. Park, C. B. and Sain, M., “The effect of Dispersed Elastomer Particle Size on Heterogeneous Nucleation of TPO with N2 Foaming” Journal of Chemical Engineering Science, Vol. 66, No. 16, pp. 3675-3686, 2011.
|
[18]
|
Azimi, H. R. Rezaei M. and Abbasi, F., “The Effect of Expansion Conditions on the Batch Foaming Dynamics of St-MMA Copolymer” Journal of Cellular Plastics, Vol. 48, No. 2, pp. 125-140, 2011.
|
[19]
|
Taki, K. Yanagimoto, T. Funami, E. Okamoto, M. and Ohshima, M., “Visual Observation of CO2 Foaming of Polypropylene-Clay Nanocomposites” Polymer Engineering and Science, Vol. 44, No. 6, pp. 1004-1011, 2007.
|
[20]
|
Azimi, H. R. Rezaei, M. and Salehi, M., “The Effect of Copolymer Composition on the Batch Foaming Dynamics of Styrene/Methylmethacrylate Copolymers” Journal of Thermolastic Composite Materials, Vol. 30, No. 1, pp. 47-66, 2015.
|
[21]
|
Emami, M. Thompson, M. R. and Vlachopoulos, J., “Experimental and Numerical Studies on Bubble Dynamics in Nonpressurized Foaming Systems” Journal of Polymer Engineering and Science, Vol. 54, No. 8, pp. 1948-1952, 2014.
|
[22]
|
Salehi, M. Hosseini, M. S. and Rezaei, M., “Modeling of bubble growth behavior in the PS/CO2 batch foaming system using finite element method” Modares Mechanical Engineering, Vol. 16, No. 5, pp. 321-328, 2016. (in Persian فارسی)
|
[23]
|
Taki, K. Tabata, K. Kihara, S. I. and Ohshima, M., “Bubble Coalescence in Foaming Process of Polymers” Journal of Polymer Engineering and Science, Vol. 46, No. 5, pp. 680-690, 2006.
|
[24]
|
Enayati, M. S. Famili, M. H. N. and Janani, H., “Open-celled microcellular foaming and the formation of cellular structure by a theoretical pattern in polystyrene” Iranian Polymer Journal, Vol. 22, No. 5, pp. 417-428, 2013.
|
[25]
|
Tsivintzelis, I. Angelopoulou, A. G. and Panayiotou, C., “Foaming of polymers with supercritical CO2: An experimental and theoretical study” Journal of Polymer, Vol. 48, No. 20, pp. 5928-5939, 2007.
|
[26]
|
Salejova, G. and Kosek, J., “Dynamics of Foaming of Polystyrene Particles” Macromolecular Symposia, Vol. 243, No. 1, pp. 233-246, 2006.
|
[27]
|
Famili, M. H. N. Janani, H. and Enayati, M. S., “Foaming of a Polymer-Nanoparticle System: Effect of the Particle Properties” Journal of Applied Polymer Science, Vol. 119, No. 5, pp. 2847-2856, 2010.
|
[28]
|
Salehi, M. Rezaei, M. and Hosseini, M. S., “Experimental and theoretical investigation on polystyrene/n-pentane foaming process” International Journal of Material Forming, Vol. 10, No. 3, pp. 421-434, 2016.
|
[29]
|
Park, S. J. and Jin, J. S., “Effect of corona discharge treatment on the dyeability of low-density polyethylene film” Journal of Colloid and Interface Science, Vol. 236, No. 1, pp. 155-160, 2001.
|