[1] Puppo, AH. and Evensen, HA., "Interlaminar Shear in Laminated Composites Under Generalized Plane Stress" Journal of Composite Materials, Vol. 4, pp. 204-220, 1970.
[2] Becker, W., "Closed-Form Solution for the Free-Edge Effect in Cross-Ply Laminates" Composite Structures, Vol. 26, pp. 39-45, 1993.
[3] Wang, ASD. and Crossman, FW., "Calculation of Edge Stresses in Multi-Layer Laminates by Sub-Structuring" Journal of Composite Materials, Vol. 12, pp. 76-83, 1978.
[4] Lessard, LB., Schmidt, AS. and Shokrieh, MM., "Three-Dimensional Stress Analysis of Free-Edge Effects in a Simple Composite Cross-Ply Laminate" International Journal of Solids and Structures, Vol. 33, pp. 2243-2259, 1996.
[5] Chung, S., “Effects of Interlaminar Stress Gradients on Free Edge Delamination in Composite Laminates,” Ph.D Thesis, Drexel University, USA, 2003.
[6] Diaz, AD., Caron, JF. and Carreira, RP., "Software Application for Evaluating Interfacial Stresses in Inelastic Symmetrical Laminates With Free Edges" Composite Structures, Vol. 58, pp. 195-208, 2002.
[7] Lorriot, T., Marion, G., Harry, R. and Wargnier, H., "Onset of Free-Edge Delamination in Composite Laminates Under Tensile Loading" Composites Part B: Engineering, Vol. 34, pp. 459-471, 2003.
[8] Rice, JR., "A Path Independent Integral and the Approximate Analysis of Strain Concentration by Notches and Crack" Journal of Applied Mechanics, Vol 35, pp. 379-386, 1968.
[9] Hutchinson, J., "Singular Behaviour at the End of a Tensile Crack in a Hardening Material" Journal of the Mechanics and Physics of Solids, Vol. 16, pp. 13-31, 1968.
[10] Rice, JR. and Rosengren, GF., "Plane Strain Deformation Near a Crack Tip in a Power-Law Hardening Material" Journal of the Mechanics and Physics of Solids, Vol. 16, pp. 1-12, 1968.
[11] Shih, C. and Hutchinson, J., "Fully Plastic Solutions and Large Scale Yielding Estimates for Plane Stress Crack Problems" Journal of Engineering Materials and Technology, Vol. 98, pp. 289-295, 1976.
[12] Amestoy, M., Bui, H. and Labbens, R., "On the Definition of Local Path Independent Integrals in Three-Dimensional Crack Problems" Mechanics Research Communications, Vol. 8, pp. 231-236, 1981.
[13] Hakimelahi, B. and Soltani, N., "3D J‐Integral Evaluation Using the Computation of Line and Surface Integrals" Fatigue & Fracture of Engineering Materials & Structures, Vol. 33, pp. 661-672, 2010.
[14] Mollón, V., Bonhomme, J., Viña, J. and Argüelles, A., "Theoretical and Experimental Analysis of Carbon Epoxy Asymmetric DCB Specimens to Characterize Mixed Mode Fracture Toughness" Polymer Testing, Vol. 29, pp. 766-770, 2010.
[15] Gong, X., Hurez, A. and Verchery, G., "On the Determination of Delamination Toughness by Using Multidirectional DCB Specimens" Polymer Testing, Vol. 29, pp. 658-666, 2010.
[16] Shokrieh, MM. and Zeinedini, A., “Analytical prediction of mode I strain energy release rate at crack growth initiation of polymeric nanocomposites” Journal of Science and Technology of Composites, Vol. 3, No. 1, pp. 1-10, 2016. (in Persianفارسی )
[17] Schön, J., Nyman, T., Blom, A. and Ansell, H. "A Numerical and Experimental Investigation of Delamination Behaviour in the DCB Specimen" Composites Science and Technology, Vol. 60, pp. 173-184, 2000.
[18] Naghipour, P., Bartsch, M., Chernova, L., Hausmann, J. and Voggenreiter, H., "Effect of Fiber Angle Orientation and Stacking Sequence on Mixed Mode Fracture Toughness of Carbon Fiber Reinforced Plastics: Numerical and Experimental Investigations" Materials Science and Engineering: A, Vol. 527, pp. 509-517, 2010.
[19] Avidson, BD. and Gharibian SJ., "Evaluation of Energy Release Rate-Based Approaches for Predicting Delamination Growth in Laminated Composites" International Journal of Fracture, Vol. 105, pp. 343–365, 2000.
[20] Pereira, A., Morais, AD., Moura, MD. and Magalhães, A., "Mode I Interlaminar Fracture of Woven Glass/Epoxy Multidirectional Laminates" Composites Part A: Applied Science and Manufacturing, Vol. 36, pp. 1119-1127, 2005.
[21] Rehan, MM., Rousseau, J., Gong, X., Guillaumat, L. and Ali, J., "Effects of Fiber Orientation of Adjacent Plies on the Mode I Crack Propagation in a Carbon-Epoxy Laminates" Procedia Engineering, Vol. 10, pp. 3179-3184, 2011.
[22] Reddy, JN., “Mechanics of Laminated Composite Plates and Shells: Theory and Analysis” Second ed., CRC Press, Florida, pp. 740-742, 2004.
[23] Krueger, R., "Virtual Crack Closure Technique: History, Approach and Applications" Applied Mechanics Reviews, Vol. 57, pp. 109-143, 2004.
[24] Zou, Z., Reid, S., Li, S. and Soden, P., "Application of a Delamination Model to Laminated Composite Structures" Composite Structures, Vol. 56, pp. 375-389, 2002.
[25] Morais, AD., Moura, MD., Gonçalves, J. and Camanho, P., "Analysis of Crack Propagation in Double Cantilever Beam Tests of Multidirectional Laminates" Mechanics of Materials, Vol. 35, pp. 641-652, 2003.
[26] Kanninen, M., "A Dynamic Analysis of Unstable Crack Propagation and Arrest in The DCB Test Specimen" International Journal of Fracture, Vol. 10, pp. 415-430, 1974.
[27] Kondo, K., "Analysis of Double Cantilever Beam Specimen" Advanced Composite Materials, Vol. 4, pp. 355-366, 1995.
[28] Ozdil, F. and Carlsson, L., "Beam Analysis of Angle-Ply Laminate DCB Specimens" Composites Science and Technology, Vol. 59, pp. 305-315, 1999.
[29] Shokrieh, MM., Rarani, MH. and Ayatollahi, M., "Calculation of GI for a Multidirectional Composite Double Cantilever Beam on Two-Parametric Elastic Foundation" Aerospace Science and Technology, Vol. 15, pp. 534-543, 2011.