[1] Sadeghi, M. and Pol, M. H., “Experimental Investigation of the Effect Effective Of Factors and Parameters on the Punch on the Properties of Quasi-Static Punching Shear the Glass/Epoxy Composite” Journal of Science and Technology of Composites, Vol. 2, No. 4, pp. 13-22, 2016. (In Persian )
[2] Rahimi-Sharbaf, H. Rahimi, G. H. and Liaghat, G. H., “Experimental Study of Behavior of Filament Winding Composite Pipes With Liner Using Glass Fibers and Silica Nanoparticles Under Impact Loading” Journal of Science and Technology of Composites, Vol. 3, No. 4, pp. 311-320, 2017. (In Persian)
[3] Pol, M. H. and Liaghat, G. H., "Studies on the Mechanical Properties of Composites Reinforced with Nanoparticles" Polymer Composites 38.1: 205-212, 2017. (in Persian)
[4] Kakogiannis, D. Chung Kim Yuen, S. Palanivelu, S. Van Hemelrijck, D. Van Paepegem, W. Wastiels, J. Vantomme, J. and Nurick, G. N., “Response of Pultruded Composite Tubes Subjected to Dynamic and Impulsive Axial Loading”, In Composites Part B: Engineering, Volume 55, Pages 537-547, ISSN 8368-1395, 2013.
[5] Jiancheng, H. and Xinwei, W., “Numerical and Experimental Investigations on the Axial Crushing Response of Composite Tubes” Composite Structures, Vol. 91, Issue 2, Pages 222-228, ISSN 0263-8223, 2009.
[6] Hull, D., “A Unified Approach to Progressive Crushing of Fiber-Reinforced Composite Tubes” Composites Science and Technology, Volume 40, Issue 4, Pages 377-421, ISSN 0266-3538, 1991.
[7] Song, H. W. Wan, Z. M. Xie, Z. M. and Du, X. W., “Axial Impact Behavior and Energy Absorption Efficiency of Composite Wrapped Metal Tubes” International Journal of Impact Engineering, 24(4), 385-401, 2000.
[8] Okano, M. Sugimoto, K. Saito, H. Nakai, A. Hamada, H., “Effect of the Braiding Angle on the Energy Absorption Properties of a Hybrid Braided FRP Tube”. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 219(1), 59-66. 2005
[9] Karagiozova, M. Alves, N. Jones, “Inertia Effects in Axisymmetrically Deformed Cylindrical Shells under Axial Impact”, International Journal of Impact Engineering, Vol. 24, pp. 1083-1115, 2000.
[10] Mirzaei, M. Shakeri, M. Sadighi, M. and Akbarshahi, H., “Experimental and Analytical Assessment of Axial Crushing of Circular Hybrid Tubes Under Quasi-Static Load, Composite Structures”, Volume 94, Issue 6, Pages 1959-1966, ISSN 0263-8223, 2012.
[11] Matthew David, Alastair F. and Johnson, “Effect of Strain Rate on the Failure Mechanisms and Energy Absorption in Polymer Composite Elements under Axial Loading” Composite Structures, Volume 122, Pages 430-439, ISSN 0263-8223, 2015.
[12] Sadeghi, M. and Pol, M. H., “Investigation of Behaviors of Glass/epoxy Laminate Composites Reinforced with Carbon Nanotubes under Quasi-static Punch Shear Loading” Journal of Sandwich Structures & Materials: 1099636217719223, 2017.
[13] Sadeghi, Mohammad, and Mohammad Hossein Pol. "Experimental Studies on the Punch Shear Characterization of Glass/epoxy/CNTs Laminate Nanocomposites." Polymer Composites.
[14] Yeganeh, E. M. Liaghat, G. H. and Pol, M. H., “Laminate Composites Behavior under Quasi-static and High Velocity Perforation” STEEL AND COMPOSITE STRUCTURES, 22(4), 777-796, 2016.
[15] Han, Haipeng, Taheri, Farid, Pegg, Neil and Lu, You, “A Numerical Study on the Axial Crushing Response of Hybrid Pultruded and ±45° Braided Tubes” Composite Structures, Volume 80, Issue 2, Pages 253-264, ISSN 0263-8223, 2017.
[16] Huang, Jiancheng and Wang, Xinwei, “Numerical and Experimental Investigations on the Axial Crushing Response of Composite Tubes” Composite Structures, Volume 91, Issue2, Pages222-228, ISSN0263-8223, 2009.
[17] Chiu, L. N. Falzon, B. G. Ruan, D. Xu, S. Thomson, R. S. Chen, B. and Yan, W., “Crush Responses of Composite Cylinder under Quasi-static and Dynamic Loading” Composite Structures, 131, 90-98, 2016.
[18] Deniz, M. E. Ozen, M. Ozdemir, O. Karakuzu, R. and Icten, B. M., “Environmental Effect on Fatigue Life of Glass–epoxy Composite Pipes Subjected to Impact Loading” Composites Part B: Engineering, 44(1), 304-312, 2013.
[19] Kim, J. S. Yoon, H. J. and Shin, K. B., “A Study on Crushing Behaviors of Composite Circular Tubes with Different Reinforcing Fibers” International Journal of Impact Engineering, 38(4), 198-207, 2011.
[20] Abdewi, E. F. Sulaiman, S. Hamouda, A. M. S. and Mahdi, E., “Effect of Geometry on the Crushing Behaviour of Laminated Corrugated Composite Tubes” Journal of materials processing technology, 172(3), 394-399, 2006.