[1] Abrate, S., “Impact on Composite Structures“, Cambridge University Press, 2005.
[2] Ashby, M. F. Evans, A.; Fleck, N.A.; Gibson, L.J.; Hutchinson, J.W.; Wadley, H.N.G., “Metal Foams: A Design Guide“, Butterworth Heinemann: Burlington, 2000.
[3] Gibson, L. J. A., M.F., “Cellular Solids“ 2 ed., Cambridge University Press, 1997.
[4] Banhart, J. S., C.; Neumann, U. , “Light-Weight Aluminum Foam Structures for Ships“ in Proceeding of 55-63, 2011.
[5] Baumeister, J. B., J.; Weber, M, “Aluminum Foams for Transport Industry“ Material Design Vol. 18, pp. 217-220, 1997.
[6] Hazizan, M. A. C., W.J., “The Low Velocity Impact Response of Foam-Based Sandwich Structures“ Composites: Part B Vol. 33, pp. 193-204, 2002.
[7] Crupi, V. E., G.; Guglielmino, E., “Low Velocity Impact Strength of Sandwich Materials“ Journal of Sandwich Structure Material, Vol. 13, pp. 409-426, 2011.
[8] Crupi, V. E., G.; Guglielmino, E., “Computed Tomography Analysis of Damage in Composites Subjected to Impact Loading“ Fracture and Structure Integrity, Vol. 17, pp. 32-41, 2011.
[9] Olurin, O. B. A., M.; Körner, C.; Singer, R.F. , “The Investigation of Morphometric Parameters of Aluminum Foams Using Micro-Computed Tomography“ Material Science Engineering, Vol. 328, pp. 334-343, 2002.
[10] Wicklein, M. T., K, “Numerical Investigations of the Elastic and Plastic Behavior of an Open-Cell Aluminum Foam“ Material Science Engineering, Vol. 397, pp. 391-399, 2005.
[11] Hossein Farahat, S. Y. A. B., “Effect of Heat Treatment on the Impact Response of Aluminum Foam with Consideration of Statistical Analysis“ Modares Mechanical Engineering, Vol. 16, No. 10, pp. 199-206, 2016. (in Persian)
[12] Chengjun Liu a, Y. X. Z., L. YebHigh, “Velocity Impact Responses of Sandwich Panels with Metal fibre Laminate Skins and Aluminum Foam Core“ International Journal of Impact Engineering Vol. 100, pp. 139-153, 2017.
[13] Pengfei Wang a, b., Songlin Xu a,n, Zhibin Li a, Jinglei Yang b, Hang Zheng a, Shisheng Hu, “Temperature Effects on the Mechanical Behavior of Aluminum Foam under Dynamic Loading“ Materials Science & Engineering A Vol. 599, pp. 174-179, 2014.
[14] Kavei, G., “Mechanical Properties of Aluminum Foam Fabricated by Aluminum Powders with Na or Carbamide Replica“ AASCIT Journal of Material, Vol. 1, No. 2, pp. 22-30, 2015.
[15] Lorenzo Peroni, M. A., Marco Peroni, “The Mechanical Behavior of Aluminum Foam Structures in Different Loading Conditions“ international Journal of Impact Engineering Vol. 35, pp. 644-658, 2008.
[16] S. Feli, S. S. J., “An Analytical Investigation of Perforation of Aluminum-Foam Sandwich Panels under Ballistic Impacts“ Modares Mechanical Engineering, Vol. 13, No. 6, pp. 52-59, 2013. (in Persian)
[17] Golestanipoor, M., Babakhani, A, Zebarjad, M, “Simulation of Absorbed Impact Energy in Aluminum Sandwich Panels with Foam-Core under High Rate Impact Test“ Journal of Advanced Design and Manufacturing Technology, Vol. 9, No. 2, pp. 17-27, 2014. (in Persian)
[18] Golestanipoor, M., Babakhani, A, Zebarjad, M, Tavakoli, M, Naderi, B, “Investigation of Absorbed Energy in Sandwich Panels with Foam-Core under Drilling“ Journal of Modern Materials, Vol. 3, No. 2, pp. 10-15, 2012. (in Persian)
[19] Golestanipoor, M., Babakhani, A, Zebarjad, M, “Investigation and Simulation of Quasi Static Drilling in Sandwich Panels with Foam-Core“ Journal of Modern Materials, Vol. 6, No. 2, pp. 23-28, 2015. (in Persian)
)