[1] Lee, C. Wei, X. Kysar, J. W. and Hone, J., “Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene“ science, Vol. 321, No. 5887, pp. 385-388, 2008.
[2] Paul, D. and Robeson, L. M., “Polymer Nanotechnology: Nanocomposites“ Polymer, Vol. 49, No. 15, pp. 3187-3204, 2008.
[3] Goettler, L., Lee, K. and Thakkar, H., “Polym Rev 2007, 47, 291“ CrossRef| CAS| Web of Science® Times Cited, Vol. 13.
[4] Gao, L. Zhou, X. and Ding, Y., “Effective Thermal and Electrical Conductivity of Carbon Nanotube Composites“ Chemical Physics Letters, Vol. 434, No. 4, pp. 297-300, 2007.
[5] Liu, W. Hoa, S. V. and Pugh, M., “Fracture Toughness and Water Uptake of High-Performance Epoxy/Nanoclay Nanocomposites“ Composites Science and Technology, Vol. 65, No. 15, pp. 2364-2373, 2005.
[6] Boo, W. Sun, L. Liu, J. Clearfield, A. Sue, H. J. Mullins, M. and Pham, H., “Morphology and Mechanical Behavior of Exfoliated Epoxy/Α-Zirconium Phosphate Nanocomposites“ Composites science and technology, Vol. 67, No. 2, pp. 262-269, 2007.
[7] Ma, P. C. Siddiqui, N. A. Marom, G. and Kim, J. K., “Dispersion and Functionalization of Carbon Nanotubes for Polymer-Based Nanocomposites: A Review“ Composites Part A: Applied Science and Manufacturing, Vol. 41, No. 10, pp. 1345-1367, 2010.
[8] Wang, Z. Colorad, H. A. Guo, Z. H. Kim, H. Park, C. L. Hahn, H. T. Lee, S. G. Lee, K. H. and Shang, Y. Q., “Effective Functionalization of Carbon Nanotubes for Bisphenol F Epoxy Matrix Composites“ Materials Research, Vol. 15, No. 4, pp. 510-516, 2012.
[9] Cui, L. J. Wang, Y. B. Xiu, W. J. Wang, W. Y. Xu, L. H. Xu, X. B. Meng, Y. Li, L. Y. Gao, J. and Chen, L.-T., “Effect of Functionalization of Multi-Walled Carbon Nanotube on the Curing Behavior and Mechanical Property of Multi-Walled Carbon Nanotube/Epoxy Composites“ Materials & Design, Vol. 49, pp. 279-284, 2013.
[10] Yasmin, A. and Daniel, I. M., “Mechanical and Thermal Properties of Graphite Platelet/Epoxy Composites“ Polymer, Vol. 45, No. 24, pp. 8211-8219, 2004.
[11] Madhukar, M. S. and Drzal, L. T., “Fiber-Matrix Adhesion and Its Effect on Composite Mechanical Properties: I. Inplane and Interlaminar Shear Behavior of Graphite/Epoxy Composites“ Journal of Composite Materials, Vol. 25, No. 8, pp. 932-957, 1991.
[12] Rafiee, M. A. Rafiee, J. Wang, Z. Song, H. Yu, Z. Z. and Koratkar, N., “Enhanced Mechanical Properties of Nanocomposites at Low Graphene Content“ ACS nano, Vol. 3, No. 12, pp. 3884-3890, 2009.
[13] Miller, S. G. Bauer, J. L. Maryanski, M. J. Heimann, P. J. Barlow, J. P. Gosau, J. M. and Allred, R. E., “Characterization of Epoxy Functionalized Graphite Nanoparticles and the Physical Properties of Epoxy Matrix Nanocomposites“ Composites Science and Technology, Vol. 70, No. 7, pp. 1120-1125, 2010.
[14] Chiang, C. L. and Hsu, S. W., “Synthesis, Characterization and Thermal Properties of Novel Epoxy/Expandable Graphite Composites“ Polymer International, Vol. 59, No. 1, pp. 119-126, 2010.
[15] Rafiee, M. A. Rafiee, J. Srivastava, I. Wang, Z. Song, H. Yu, Z. Z. and Koratkar, N., “Fracture and Fatigue in Graphene Nanocomposites“ small, Vol. 6, No. 2, pp. 179-183, 2010.
[16] Ahmadi-Moghadam, B. Sharafimasooleh, M. Shadlou, S. and Taheri, F., “Effect of Functionalization of Graphene Nanoplatelets on the Mechanical Response of Graphene/Epoxy Composites“ Materials & Design, Vol. 66, pp. 142-149, 2015.
[17] Dhand, V. Mittal, G. Rhee, K. Y. Park, S. J. and Hui, D., “A Short Review on Basalt Fiber Reinforced Polymer Composites“ Composites Part B: Engineering, Vol. 73, pp. 166-180, 2015.
[18] Eslami-Farsani, R. Reza Khalili, S. M. and Najafi, M., “Effect of Thermal Cycling on Hardness and Impact Properties of Polymer Composites Reinforced by Basalt and Carbon Fibers“ Journal of Thermal Stresses, Vol. 36, No. 7, pp. 684-698, 2013.
[19] Daghigh, V. Khalili, S. and Farsani, R. E., “Creep Behavior of Basalt Fiber-Metal Laminate Composites“ Composites Part B: Engineering, Vol. 91, pp. 275-282, 2016.
[20] Lopresto, V. Leone, C. and De Iorio, I., “Mechanical Characterisation of Basalt Fibre Reinforced Plastic“ Composites Part B: Engineering, Vol. 42, No. 4, pp. 717-723, 2011.
[21] Kamar, N. T. Hossain, M. M. Khomenko, A. Haq, M. Drzal, L. T. Loos, A., “Interlaminar reinforcement of glass fiber/epoxy composites with graphene nanoplatelets, Composites Part A“ Applied Science and Manufacturing, Vol. 70, pp. 82-92, 2015.
[22] Bulut, M., “Mechanical Characterization of Basalt/Epoxy Composite Laminates Containing Graphene Nanopellets“ Composites Part B: Engineering, Vol. 122, pp. 71-78, 2017.
[23] Khosravi, H. Eslami-Farsani, R. and Ebrahimnezhad-Khaljiri, H., “An Experimental Study on Mechanical Properties of Epoxy/Basalt/Carbon Nanotube Composites under Tensile and Flexural Loadings“, Journal of Science and Technology of Composites, Vol. 3, No. 2, pp. 187-194, 2016. (In Persian)
[24] Coates, J., “Interpretation of Infrared Spectra, a Practical Approach“ Encyclopedia of analytical chemistry, 2000.
[25] Pathak, A. K., Borah, M., Gupta, A., Yokozeki, T. and Dhakate, S. R., “Improved Mechanical Properties of Carbon Fiber/Graphene Oxide-Epoxy Hybrid Composites“ Composites Science and Technology, Vol. 135, pp. 28-38, 2016.
[26] Davim, J. P. and Reis, P., “Study of Delamination in Drilling Carbon Fiber Reinforced Plastics (Cfrp) Using Design Experiments“ Composite structures, Vol. 59, No. 4, pp. 481-487, 2003.
[27] Choi, N., Kinloch, A. and Williams, J., “Delamination Fracture of Multidirectional Carbon-Fiber/Epoxy Composites under Mode I, Mode Ii and Mixed-Mode I/Ii Loading“ Journal of Composite Materials, Vol. 33, No. 1, pp. 73-100, 1999.
[28] Quaresimin, M., Schulte, K., Zappalorto, M. and Chandrasekaran, S., “Toughening Mechanisms in Polymer Nanocomposites: From Experiments to Modelling“ Composites Science and Technology, Vol. 123, pp. 187-204, 2016.