[1] Eizadjou, M., Manesh, H.D. and Janghorban, K., "Microstructure and mechanical properties of ultra-fine grains (UFGs) aluminum strips produced by ARB process" Journal of Alloys and Compounds, Vol. 474, No. 1, pp. 406-415, 2009.
[2] Pirgazi, H., Akbarzadeh, A., Petrov, R. and Kestens, L., "Microstructure evolution and mechanical properties of AA1100 aluminum sheet processed by accumulative roll bonding" Materials Science and Engineering: Vol. 497, No. 1, pp. 132-138, 2008.
[3] Lee, S.H., Saito, Y., Sakai, T. and Utsunomiya, H., "Microstructures and mechanical properties of 6061 aluminum alloy processed by accumulative roll-bonding" Materials Science and Engineering: A, Vol. 325, No. 1, pp.228-235, 2002.
[4] Chung, Y.H., Park, J.W. and Lee, K.H., "An analysis of accumulated deformation in the equal channel angular rolling (ECAR) process" Metals and Materials International, Vol. 12, No. 4, pp.289-292, 2006.
[5] Tsuji, N., Saito, Y., Lee, S.H. and Minamino, Y., "ARB (Accumulative Roll‐Bonding) and other new techniques to produce bulk ultrafine grained materials" Advanced Engineering Materials, Vol. 5, No. 5, pp.338-344, 2003.
[6] Shaarbaf, M. and Toroghinejad, M.R., "Nano-grained copper strip produced by accumulative roll bonding process" Materials Science and Engineering: A, Vol. 473, No. 1, pp.28-33, 2008.
[7] Shamanian, M., Mohammadnezhad, M., Asgari, H., & Szpunar, J. "Fabrication and characterization of Al–Al 2 O 3–ZrC composite produced by accumulative roll bonding (ARB) process". Journal of Alloys and Compounds,Vol. 618, NO. 1, pp 19-26,2015.
[8] Salimi, S., H. Izadi, and A. P. Gerlich. "Fabrication of an aluminum–carbon nanotube metal matrix composite by accumulative roll-bonding." Journal of materials science, Vol. 46, No. 2, pp. 409-415,2001.
[9] Jamaati, R., Toroghinejad, M.R. and Najafizadeh, A., 2010. "Application of anodizing and CAR processes for manufacturing Al/Al 2 O 3 composite". Materials Science and Engineering, Vol. 527, No. 16, pp. 3857-3863, 2010.
[10] Amirkhanlou, S., Jamaati, R., Niroumand, B. and Toroghinejad, M.R., "Fabrication and characterization of Al/SiC p composites by CAR process" Materials Science and Engineering: A, Vol. 528, No. 13, pp.4462-4467, 2011.
[11] Ruppert, M., Höppel, H.W. and Göken, M., "Influence of cross-rolling on the mechanical properties of an accumulative roll bonded aluminum alloy AA6014", Materials Science and Engineering,Vol. 597, No. 1, pp.122-127, 2014.
[12] Alizadeh, M. and Paydar, M.H., "High-strength nanostructured Al/B 4 C composite processed by cross-roll accumulative roll bonding" Materials Science and Engineering: A, Vol. 538, No. 1, pp.14-19, 2012.
[13] Hashemi, M.,Jamaati, R. and Toroghinejad, M.R.,"Microstructure and mechanical properties of Al/SiO 2 composite produced by CAR process" Materials Science and Engineering: A, Vol. 532, No. 1, pp.275-281, 2012.
[14] Alizadeh, M., "Comparison of nanostructured Al/B 4 C composite produced by ARB and Al/B 4 C composite produced by RRB process" Materials Science and Engineering: A,Vol. 528, No.2, pp.578-582, 2010.
[15] Alizadeh M, Salahinejad E. "A comparative study on metal–matrix composites fabricated by conventional and cross accumulative roll-bonding processes". Journal of Alloys and Compounds. Vol. 620, No. 1, pp.180-184,2015.
[16] Kwan, C., Wang, Z. and Kang, S.B., "Mechanical behavior and microstructural evolution upon annealing of the accumulative roll-bonding (ARB) processed Al alloy 1100" Materials Science and Engineering: A, Vol. 480, No. 1, pp.148-159, 2008.
[17] El Mahallawy, N., Fathy, A., Abdelaziem, W. and Hassan, M.. "Microstructure evolution and mechanical properties of Al/Al–12% Si multilayer processed by accumulative roll bonding (ARB) ". Materials Science and Engineering: A, Vol 647, No. 1, pp.127-135, 2015.
[18] Alizadeh, M., "Comparison of nanostructured Al/B 4 C composite produced by ARB and Al/B 4 C composite produced by RRB process" Materials Science and Engineering: A, Vol. 528, No. 2, pp.578-582, 2010.
[19] Xing, J., Yang, X., Miura, H. and Sakai, T., "Mechanical properties of magnesium alloy AZ31 after severe plastic deformation" Materials transactions, Vol.49, No.1, pp.69-75, 2008.
[20] Yu HL, Lu C, Tieu AK, Li HJ, Godbole A, Zhang SH. "Special Rolling Techniques for Improvement of Mechanical Properties of Ultrafine‐Grained Metal Sheets" a Review. Advanced Engineering Materials. Vol. 18, No. 5, pp.754-69,2016.
[21] Zhang, Z., and D. L. Chen. "Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: a model for predicting their yield strength." Scripta Materialia, Vol. 54, No. 7, pp. 1321-1326,2006.
[22] Jamaati, R., Amirkhanlou, S., Toroghinejad, M.R. and Niroumand, B., "Effect of particle size on microstructure and mechanical properties of composites produced by ARB process" Materials Science and Engineering: A, Vol. 528, No.4 , pp.2143-2148, 2011.
[23] Naseri, M., Hassani, A. and Tajally, M., "An alternative method for manufacturing Al/B 4 C/SiC hybrid composite strips by cross accumulative roll bonding (CARB) process". Ceramics International,Vol. 41, No. 10 , pp.13461-13469, 2015.
[24] Schmidt, C.W., Knieke, C., Maier, V., Höppel, H.W., Peukert, W. and Göken, M., "Accelerated grain refinement during accumulative roll bonding by nanoparticle reinforcement". Scripta Materialia, Vol. 64, No. 3, pp. 245-248, 2011.
[25] Naseri, M., Hassani, A. and Tajally, M., "Fabrication and characterization of hybrid composite strips with homogeneously dispersed ceramic particles by severe plastic deformation" Ceramics International, Vol. 41, No. 3, pp.3952-3960, 2015.
[26] Jamaati, R., Amirkhanlou, S., Toroghinejad, M. R., & Niroumand, B, "Effect of particle size on microstructure and mechanical properties of composites produced by ARB process". Materials Science and Engineering, Vol. 528, No. 4, pp. 2143-2148, 2011.
[27] Saito, Y., Utsunomiya, H., Tsuji, N. and Sakai, T., "Novel ultra-high straining process for bulk materials—development of the accumulative roll-bonding (ARB) process" Acta materialia, Vol. 47, No. 2, pp.579-583, 1999.