1-
[1] Daniel, G., “Composite Materials: Design and Applications”, CRC press, 2014.
[2] Eungkee Lee, R. Hasanzadeh, R. Azdast, T., “A Multi-Criteria Decision Analysis on Injection Moulding of Polymeric Microcellular Nanocomposite Foams Containing Multi-Walled Carbon Nanotubes”, Plastics, Rubber and Composites, Vol. 46, No. 4, pp. 155-162, 2017.
[3] Mezghani, K. Farooqui, M. Furquan, S. Atieh, M., “Influence of Carbon Nanotube (CNT) on the Mechanical Properties of LLDPE/CNT Nanocomposite Fibers”, Materials Letters, Vol. 65, No. 23, pp. 3633-3635, 2011.
[4] Shishavan, S. Azdast, T. Ahmadi, S., “Investigation of the Effect of Nanoclay and Processing Parameters on the Tensile Strength and Hardness of Injection Molded Acrylonitrile Butadiene Styrene-Organoclay Nanocomposites”, Materials & Design, Vol. 58, pp. 527-534, 2014.
[5] Esmaili, P. Azdast, T. Doniavi, A. Hasanzadeh, R. Mamaghani, S. Lee, R., “Experimental Investigation of Mechanical Properties of Injection Polymeric Nanocomposites Containing Multi-Walled Carbon Nanotubes According to Design of Experiments”, Journal of Science and Technology of Composite, Vol. 2, No. 3, pp. 67-74, 2015. (In Persian)
[6] Gao, K. Dommelen, J. A. W. Geers, M. G. D., “Investigation of the Effects of the Microstructure on the Sound Absorption Performance of Polymer Foams Using a Computational Homogenization Approach”, European Journal of Mechanics-A/Solids, Vol. 61, pp. 330-344, 2017.
[7] Yetkin, S. Unal, H. Mimaroglu, A. Findik, F., “Influence of Process Parameters on the Mechanical and Foaming Properties of PP Polymer and PP/TALC/EPDM Composites”, Polymer-Plastics Technology and Engineering, Vol. 52, No. 5, pp. 433-439, 2013.
[8] Yetgin, S. Unal, H. Mimaroglu, A., “Influence of Foam Agent Content and Talc Filled Polypropylene Composite Foams”, Journal of Cellular Plastics, Vol. 50, No. 6, pp. 563-576, 2014.
[9] Mohammadian, Z. Rezaei, M. Azdast, T., “Microstructure, Physical, and Mechanical Properties of LDPE/UHMWPE Blend Foams: an Experimental Design Methodology”, Journal of Thermoplastic Composite Materials, Vol. 29, No. 9, pp. 1229-1260, 2016.
[10] Wee, D. Seong, DG. Youn, JR., “Processing of Microcellular Nanocomposite Foams by Using a Supercritical Fluid”, Fibers and Polymers, Vol. 5, No. 2, pp. 160-169, 2004.
[11] Dolomanova, V. Kumar, V. Pyrz, R. Madaleno, LAO. Jensen, AR. Rauhe, JCM., “Fabrication of Microcellular PP-MMT Nanocomposite Foams in a Sub-Critical CO2 Process”, Cellular Polymers, Vol. 31, No. 3, pp. 125-143, 2012.
[12] Chen, L. Goren, B. Ozisik, R. Schadler, L., “Controlling Bubble Density in MWNT/Polymer Nanocomposite Foams by MWNT Surface Modification”, Composites Science and Technology, Vol. 72, No. 2, pp. 190-196, 2012.
[13] Li, Q. Chen, L. Li, X. Zhang, J. Zhang, X. Zheng, K. Fang, F. Zhou, H. Tian, X., “Effect of Multi-Walled Carbon Nanotubes on Mechanical, Thermal and Electrical Properties of Phenolic Foam Via Insitu Polymerization”, Composites Part A: Applied Science and Manufacturing, Vol. 82, pp. 214-225, 2016.
[14] Azerag, B. Azdast, T. Doniavi, A. Shishavan, S. Lee, R., “Structural Properties of Batch Foamed Acrylonitrile Butadiene Styrene/Nanoclay Nanocomposites”, International Journal of Mechanical and Materials Engineering, Vol. 10, No. 1, p. 19, 2015.
[15] Hasanzadeh, R. Azdast, T. Doniavi, A. Esmaili, P. Mamaghani, S. Eungkee, L., “Experimental Investigation of Properties of Polymeric Nanocomposite Foams Containing Multi-Walled Carbon Nanotubes Using Taguchi Method”, Journal of Science and Technology of Composites, Vol. 2, No. 4, pp. 37-44, 2016. (In Persian)
[16] Doniavi, A. Babazadeh, S. Azdast, T. Hasanzadeh, R., “An Investigation on the Mechanical Properties of Friction Stir Welded Polycarbonate/Aluminium Oxide Nanocomposite Sheets”, Journal of Elastomers & Plastics, DOI: 0095244316674352, 2016.
[17] Modanloo, V. Hasanzadeh, R. Esmaili, R., “The Study of Deep Drawing of Brass-Steel Laminated Sheet Composite Using Taguchi Method”, International Journal of Engineering (IJE) TRANSACTIONS A: Basics, Vol. 29, No.1, pp. 103-108, 2016.
[18] Aghaie, A. Z. Rahimi, A. B. Akbarzadeh, A., “A General Optimized Geometry of Angled Ribs For Enhancing The Thermo-Hydraulic Behavior of a Solar Air Heater Channel–A Taguchi Approach”, Renewable Energy, Vol. 83, pp. 47-54, 2015.
[19] Lee, L. Zeng, C. Cao, X. Han, X. Shen, J. Xu, G., “Polymer Nanocomposite Foams”, Composites Science and Technology, Vol. 65, No. 15, pp. 2344-2363, 2005.
[20] Kong, W. Bao, J. Wang, J. Hu, G. Xu, Y. Zhao, L., “Preparation of Open-Cell Polymer Foams by CO2 Assisted Foaming of Polymer Blends”, Polymer, Vol. 90, pp. 331-341, 2016.
[21] Huang, H. Wang, J. Sun, X., “Improving of Cell Structure of Microcellular Foames Based on Polypropylene/High-Density Polyethylene Blends”, Journal of Cellular Plastics, Vol. 44, No. 1, pp. 69-85, 2008.
[22] Naguib, H. E. Park, C. B. Reichelt, N., “Fundamental Foaming Mechanisms Governing the Volume Expansion of Extruded Polypropylene Foams”, Journal of applied polymer science, Vol. 91, No. 4, pp. 2661-2668, 2004.
[23] Grignard, B. Thomassin, J. M. Gennen, S. Poussard, L. Bonnaud, L. Raquez, J. M. Dubois, P. Tran, M. P. Park, C. B. Jerome, C. Detrembleur, C., “CO2-Blown Microcellular Non-Isocyanate Polyurethane (NIPU) Foams: From Bio-And CO2-Sourced Monomers to Potentially Thermal Insulating Materials”, Green Chemistry, Vol. 18, No. 7, pp. 2206-2215, 2016.
[24] Xu, X., Park, C.B., Xu, D. and Pop‐Iliev, R., “Effects of Die Geometry on Cell Nucleation of PS Foams Blown with CO2”, Polymer Engineering & Science, Vol. 43, No. 7, pp.1378-1390, 2003.
[25] Zheng, W. G. Lee, Y. H. Park, C. B., “Use of Nanoparticles For Improving the Foaming Behaviors of Linear PP”, Journal of applied polymer science, Vol. 117, No. 5, pp. 2972-2979, 2010.
[26] Park, C. B. Behravesh, A. H. Venter, R. D., “Low Density Microcellular Foam Processing in Extrusion using CO2”, Polymer Engineering & Science, Vol. 38, No. 11, pp. 1812-1823, 1998.
[27] Naguib, H. E. Park, C. B. Panzer, U. Reichelt, N., “Strategies For Achieving Ultra Low‐Density Polypropylene Foams”, Polymer Engineering & Science, Vol. 42, No. 7, pp. 1481-1492, 2002.