[1] Omodi, M. J. and Shokrieh, M. M., "Investigation on the Impact Resistanve of Polymeric Fibers Reinforced Composites" Journal of Science and Technology of Composites, No. 4, pp. 255-277, 2011. (In Persian)
[2] Abrate, S., "Impact on Composite Structures" ambridge: Cambridge university press, 1998.
[3] Sjoblom, P. Hartness, J. and T. Cordell, "On Low-Velocity Impact Testing of Composite Materials" Journal of composites material, Vol. 22, pp. 30-52, 1988.
[4] Shivakumar, K. Elber, W. and Illg, W., "Prediction of Low-Velocity Impact Damage in Thin Circular Laminates" Journal of Applied Mechanics, Vol. 52, pp. 674-680, 1985.
[5] Cantwell, W. and Morton, J., "The Impact Resistance of Composite Materials-a Review" Composites, Vol. 22, pp. 347-362, 1991.
[6] Liu, D. and Malvern, L., "Matrix Cracking in Impacted Glass/Epoxy Plates," Journal of composites, Vol. 21, pp. 594-609, 1987.
[7] Joshi, S. and Sun, C., "Impact-Induced Fracture Initiation and Detailed Dynamic Stress Field in the Vicinity of Impact," in American Society of Composites 2nd Tech.conf, 1987.
[8] Hesami, R. Hassani, H. Ajeli, S. and Zadhoosh, A., “Investigation Into the Energy Absorption Capacity of Reinforced Composite by 3D weft-knitted Fabrics” Journal of Textile Science and Technology, No. 2, pp. 65-70, 2012. (In Persian )
[9] Wang, X. Hu, B. Feng, Y. Liang, F. J. Mo, Xiong, J. and Y. Qiu., "Low Velocity Impact Properties of 3D Woven Basalt/Aramid Hybrid Composites" Composites science and technology, Vol. 68, pp. 444-450, 2008.
[10] Zhao, N. Rodel, H. Herzberg, C. Gao, S. L. and Krzywinski, S., "Stitched Glass/PP Composite. Part I: Tensile and Impact Properties," Composites, pp. 635-643, 2009.
[11] Sadighi, Alderliesten, R.C. and Benedictus, R., "Impact Resistance of Fiber-Metal Laminates: A Review"International Journal of Impact Engineering, Vol .49, pp. 77-90, 2012.
[12] Kiani, Y. Sadighi, Jedari Salami, M. and M. R. Eslami., "Low Velocity Impact Response of Thick FGM Beams with General Boundary Conditions in Thermal Field" Composite Structures, Vol. 104, pp. 293-303, 2013.
[13] ZareiMahmoudabadi, M. and Sadighi, M., "A Theoretical and Experimental Study on Metal Hexagonal Honeycomb Crushingunder Quasi-Static and Low Velocity Impact Loading"Materials Science and Engineering, Vol. 528, pp. 4958-4966, 2011.
[14] Sadighi, M. and Pouriayevali, H., "Quasi-Static and Low-Velocity Impact Response of Fully Backed or Simply Supported Sandwich Beams" Journal of sandwichstructures and materials, Vol. 10, 2008.
[15] Sadighi, M. Parnanen, T. Alderliesten, R. C. Sayeaftabi, M. and Benedictus, R., "Experimental and Numerical Investigation of MetalType and Thickness Effects on the Impact Resistanceof Fiber Metal Laminates"
Applied Composite Materials, Vol. 19, pp. 545-559, 2012.
[16] Ghane, M. and Zarezadeh Lari, V., "Estimating the Deflection of Weft Yarn in Plain Woven Fabric Using Yarn Pull Out Test" Indian Journal of Fiber & Textile Research, Vol. 39, pp. 394-400, 2014.
[17] Varshney, R. K. Kothari, V. K. and Dhamija, S., "Influence of Polyester Fiber Shape and Sizae on the Hairiness and Some Mechanical Properties of Yarns" Indian Journal of Fiber & Textile Research, Vol. 39, pp. 24-32, 2014.
[18] Dayari, M. Shaikhzadeh Najar, S. and Shamsi, M., "A New Theoretical Approach to Cut-Pile Carpet Compression Based on Elastic-Stored Bending Energy" The Journal of The Textile Institute, pp. 688-694, 2009.
[19] Dayari, M., "Study on Compressional Energy Contribution Into Total Energy of Pile Deformation in Cut-Pile Carpet," The Journal of The Textile Institute, pp. 1315-1321, 2014.
[20] Liu, Y. Hu, H. Long, H. and Zhao, L., "Impact Compressive Behavior of Warp-Knitted Spacer Fabrics for Protective Applications", Textile Research Journal, 82(8) 773–788, 2012.
[21] Guo, X. Long, H. and Zhao, L., "Investigation on the Impact and Compression-After-Impact Properties of Warp-Knitted Spacer Fabrics", Textile Research Journal, 83(9) 904–916, 2013.