[1] Zhang, D. and Zheng, L., "The Quench Sensitivity of Cast Al-7 Wtpct Si-0.4 Wtpct Mg Alloy" Metallurical Materials Transactiona A, Vol. 27, No. 12, pp. 3983-3994, 1996.
[2] Elshalakany, A. B. Osman, T. A. Khattab, A. and Azzam, B., "Microstructure and Mechanical Properties of MWCNTs Reinforced A356 Aluminum Alloys Cast Nanocomposites Fabricated by Using a Combination of Rheocasting and Squeeze Casting Techniques" Journal of Nanomaterials, Vol. 20, No. 1, pp 1-14, 2014.
[3] Mishra, R. S. and Ma, Z. Y., "Friction Stir Welding and Processing" Materials Science and Engineering R, Vol. 50, No. 1-2, pp. 1-78, 2005.
[4] Meng, C. Cui, H. C. Lu, G. and Tang, X. H., "Evolution Behavior of TiB2 Particles During Laser Welding on Aluminum Metal Matrix Composites Reinforced with Particles" Transactions of Nonferrous Metals Society of China, Vol. 23, No. 6, pp. 1543-1548, 2013.
[5] Liu, Q. Ke, L. Liu, F. Huang, C. and Xing, L., "Microstructure and Mechanical Property of Multiwalled Carbon Nanotubes Reinforced Aluminum Matrix Composites Fabricated by Friction Stir Processing" Materials and Design, Vol. 45, No. 1, pp. 343–348, 2013.
[6] Yousefpour, H. and Akbari Mousavi, S. A. A., "Investigations on Microstructure, Wear Behavior and Corrosion Resistance of Brass/Graphite Composite Produced by Friction Stir Processing" Journal of Science and Technology of Composites, Vol. 3, No. 3, pp. 253-260, 2016. (in Persianفارسی )
[7] Soleymani, S. Abdollah-zadeh, A. and Alidokht, S. A., "Microstructural and Tribological Properties of Al5083 Based Surface Hybrid Composite Produced by Friction Stir Processing" Wear, Vol. 278– 279, No. 1, pp. 41– 47, 2012.
[8] Shafiei-Zarghani, A. Kashani-Bozorg, A. F. and Zarei- Hanzaki, A., "Wear Assessment of Al/Al2O3 Nano-composite Surface Layer Produced Using Friction Stir Processing" Wear, Vol. 270, No. 5-6, pp. 403–412, 2011.
[9] Kapoor, R. Kandasamy, K. Mishra, R. S. Baumann, J. A. and Grant, G., "Effect of Friction Stir Processing on the Tensile and Fatigue Behavior of a Cast A206 Alloy" Materials Science and Engineering A, Vol. 561, No. 1, pp. 159–166, 2013.
[10] Khodabakhshi, F. Simchi, A. Kokabi, A. H. Sadeghahmadi, M. and Gerlich, A. P., "Reactive Friction Stir Processing of AA 5052–TiO2 Nanocomposite: Process Microstructure" mechanical characteristics, Materials Science and Technology, Vol. 31, No. 4, pp. 426-436, 2015.
[11] Mishra, R. S. Mahoney, M. W. McFadden, S. X. Mara, N. A. and Mukherjee, A. K., "High Strain Rate Superplasticity in a Friction Stir Processed 7075 Al Alloy" Scripta Materialia, Vol. 42, No. 2, pp. 163-168, 1999.
[12] Mishra, R. S. Ma, Z. Y., and Charit, I., "Friction Stir processing: a Novel Technique for Fabrication of Surface Composite" Materials Science and Engineering A, Vol. 341, No. 1-2, pp. 307-310, 2003.
[13] Ni, D. R. Wang, J. J. Zhou, Z. N. and Ma, Z. Y., "Fabrication and Mechanical Properties of Bulk NiTip/Al Composites Prepared by Friction Stir Processing" Journal of Alloys and Compounds, Vol. 586, No. 1, pp. 368-374, 2014.
[14] Asadi, P. Faraji, G. and Besharati, M. K., "Producing of AZ91/SiC Composite by Friction Stir Processing (FSP) " The InternationalJournal of Advanced Manufacturing Technology, Vol. 51, No. 1, pp. 247-260, 2010.
[15] Akramifard, H. R. Shamanian, M. Sabbaghian, M. and Esmailzadeh, M., "Microstructure and Mechanical Properties of Cu/SiC Metal Matrix Composite Fabricated via Friction Stir Processing" Materials and Design, Vol. 54, No. 1, pp. 838-844, 2014.
[16] Li, B. Shen, Y. Luo, L. and Hu, W., "Fabrication of TiCp/Ti-6Al-4V Surface Composite via Friction Stir Processing (FSP): Process Optimization, Particle Dispersion-Refinement Behavior and Hardening Mechanism" Materials Science and Engineering A, Vol. 574, No. 1, pp. 75-85, 2013.
[17] Mazaheri, Y. Karimzadeh, F. and Enayati, M. H., "A Novel Technique for Development of A356/Al2O3 Surface Nanocomposite by Friction Stir Processing" Journal of Materials Processing Technology, Vol. 211, No. 10, pp. 1614-1619, 2011.
[18] Alidokht, S. A. Abdollah-zadeh, A. Soleymani, S. and Assadi, H., "Microstructure and Tribological Performance of an Aluminium Alloy Based Hybrid Composite Produced by Friction Stir Processing" Materials and Design, Vol. 32, No. 5, pp. 2727-2733, 2011.
[19] Ahmadifard, S. Kazemi, Sh. and Heidarpour, A., "Fabrication of Al5083/TiO2 Surface Composite by Friction Stir Process and Investigating its Microstructural, Mechanical and Wear Properties" Modares Mechanical Engineering, Vol. 15, No. 12, pp. 55-62, 2015. (in Persianفارسی )
[20] Bauri, R. Yadav, D. and Suhas, G., "Effect of Friction Stir Processing (FSP) on Microstructure and Properties of Al-TiC in Situ Composite" Materials Science and Engineering A, Vol. 528, No. 13-14, pp. 4732-4739, 2011.
[21] Ahmadifard, S. Shahin, N. Kazemi, Sh. Heidarpour, A. and Shirazi, A., "Fabrication of A5083/SiC Surface Composite by Friction stir Processing and its Characterization" Journal of Science and Technology of Composites", Vol. 2, No. 4, pp. 31-36, 2016. (in Persianفارسی )
[22] Srinivasu, R. Sambasiva, R. A. Madhusudhan, R. G. and Srinivasa, R. K., "Friction Stir Surfacing of Cast A356 Aluminium-Silicon Alloy with Boro Carbide and Molybdenum Disulphide Powders" Defence Technology, Vol. 10, No. 2, pp. 1-7, 2014.
[23] Hossieni, S. A. Ranjbar, K. Dehmolaei, R. and Amirani, A. R., "Fabrication of Al5083 Surface Composites Reinforced by CNTs and Cerium Oxide Nano Particles via Friction Stir Processing" Journal ofAlloys and Compounds, Vol. 662, No. 1, pp. 725-733, 2014.
[24] Shinoda, T. and Kawai, M., "Surface Modification by Novel Friction Thermomechanical Process of Aluminium Alloy Castings" Surface and coating Technology, Vol. 456, No. 9, pp. 170-179. 2003.
[25] Amouri, K. Amouri, J. Ahmadifard, S. Kazazi, M. and Kazemi, S., "Preparation and Characterization of A356 Composite Reinforced with SiC Nano and Microparticles by Stir Casting Method" Modares Mechanical Engineering, Vol. 16, No. 10, pp. 335-342, 2016. (in Persianفارسی )
[26] Tjong, S. C., "Novel Nanoparticle-Reinforced Metal Matrix Composites with Enhanced Mechanical Properties" Advanced Engineering Materials, Vol. 8, No. 1, pp. 639–652, 2007.
[27] Bauri, R. and Surapa, M. K., "Sliding Wear Behavior of Al-Li-SiCp Composites" Journal of Materials Engineering and Performance", Vol. 265, No. 11-12, pp. 1756-1766, 2008.
[28] Mostafapour, A. and Khandani, S. T., "Role of Hybrid Ratio in Microstructural, Mechanical and Sliding Wear Properties of the Al5083/Graphitep/Al2O3p a Surface Hybrid Nanocomposite Fabricated via Friction Stir Processing Method" Materials Science and Engineering A, Vol. 559, No. 1, pp. 549-557, 2013.
[29] Lashgari, H. R. Zangeneh, Sh. Shahmir, H. Saghafi, M. Emamy, M., "Heat Treatment Effect on the Microstructure, Tensile Properties and Dry Sliding Wear Behavior of A356–10%B4C Cast Composites" Materials and Design, Vol. 31, No. 9, pp. 4414–4422, 2010.