[1] Wooster, W. A., “A Textbook in Crystal Physics,” First ed., Cambridge University Press, London, pp. 455, 1957.
[2] Nye, J. F., “Physical Properties of Crystals,” Second ed., Clarendon Press, London, pp. 309, 1985.
[3] Mulholland, G. P., “Diffusion through Laminated Orthotropic Cylinders,” Proceedings of The 5th International Heat Transfer Conference, Tokyo, Japon, pp. 250-254, 1974.
[4] Golovchan, V. T. and Artemenko, A. G., “Heat Conduction of Orthogonally Reinforced Composite Material, Journal of Engineering Physics and Thermophysics,” Vol. 51, No. 2, pp. 944-949, 2004.
[5] Shi-qiang, D. Jia-chan, L., “Homogenized Equations for Steady Heat Conduction in Composite Materials with Dilutely-Distributed Impurities,” Journal of Applied Mathematics and Mechanics, Vol. 4, No. 2, pp. 167-173, 2005.
[6] Greengard, L. Lee, J. Y., “Electrostatics and Heat Conduction in High Contrast Composite Materials,” Journal of Computational Physics, Vol. 211, No. 1, pp. 64-76, 2006.
[7] Hassan, N. Thompson, J. E. Batra, R. C. Hulcher, A.B. Song, X. and Loos, A. C., “A Heat Transfer Analysis of the Fiber Placement Composite Manufacturing Process,” Journal of Reinforced Plastics And Composites, Vol. 24, No. 8, pp. 869-888, 2005.
[8] Newnham, P. and Abrate, S., “Finite Element Analysis of Heat Transfer in Anisotropic Solids Application to Manufacturing Problems,” Journal of Reinforced Composites and Plastics, Vol. 12, No. 1, pp. 854-864, 1993.
[9] Sun, Y. Wichman, I. S., “On Transient Heat Conduction in a One-Dimensional Composite Slab,” International Journal of Heat and Mass Transfer, Vol. 47, No. 6-7, pp. 1555-1559, 2004.
[10] Oseloka, O., “Heat Conduction in Composite Media: A Boundary Integral Approach” Journal of Computers & Chemical Engineering, Vol. 26, No. 1, pp. 1621-1632, 2002.
[11] Lu, X. Tervola, P. and Viljanen, M., “Transient Analytical Solution to Heat Conduction in Composite Circular Cylinder” International Journal of Heat and Mass Transfer, Vol. 49, pp. 348-341, 2006.
[12] Lu, X., Tervola, P. and Viljanen, M., “Transient Analytical Solution to Heat Conduction in Multi-Dimensional Composite Cylinder Slab” International Journal of Heat and Mass Transfer, Vol. 49, pp. 1107-1114, 2006.
[13] Bahadur, R. and Bar-Cohen, A., “Orthotropic Thermal Conductivity Effect on Cylindrical Pin Fin Heat Transfer” International Journal of Heat and Mass Transfer, Vol. 50, No. 2, pp. 1155-1162, 2007.
[14] Kayhani, M. H. Shariati, M. Norouzi, M. Demneh, M. K., “Exact Solution of Conductive Heat Transfer in Cylindrical Composite Laminate” International Journal of Heat and Mass Transfer, Vol. 46, No. 83, pp. 83-94, 2009. Heat Mass Transfer
[15] Kayhani, M. H. Norouzi, A. Amiri Delouei, A., “A General Analytical Solution for Heat Conduction in Cylindrical Multilayer Composite Laminates” International Journal of Thermal Science, Vol. 52, No. 1, pp. 73-82, 2012.
[16] Amiri Delouei, A. Kayhani, M. H. Norouzi, M., “Exact Analytical Solution of Unsteady Axi-symmetric Conductive Heat Transfer in Orthotropic Cylindrical Composite Laminates” International Journal of Heat and Mass Transfer, Vol. 55, No. 15, pp. 4427-4436, 2012.
[17] Mohapatra, R. C. Mishrab, A. Choudhuryc, B. B., “Determination of Thermal Conductivity of Pine Wood Dust Filled Epoxy Composites” Thermal Scince, OnLine-First, 2016.
[18] Moosaie, A. and Panahi Kalus, H., “Exact solution of steady nonlinear heat conduction in exponentially graded cylindrical and spherical shells with temperature-dependent properties” Journal of Science and Technology of Composites, Vol. 3, No. 3, pp. 301-306, 2016. (In Persian)
[19] Ozisik, M. N., “Heat Conduction” Second ed., Wiley, New York, 1993.
[20] Barbero, E. J. Reddy, J. N., “Modeling of Delamination in Composite Laminates Using a Layer-Wise Plate Theory” International Journal of Solids and Structures, Vol. 28, No. 3, pp. 373-388, 1991.
[21] Robbins, D. H. Reddy, J. N., “Modeling of Thick Composites Using a Layerwise Laminate Theory” International Journal for Numerical Methods in Engineering, Vol. 36, No. 3, pp. 655-677, 1993
[22] Reddy, J. N., “Mechanics of Laminated Composite Plates and Shells Theory and Analysis” Second ed., CRC PRESS, New York, 2003.
[23] Noack, J. Rolfes, R. Tessmer, J., “New Layerwise Theories and Finite Elements for Efficient Thermal Analysis of Hybrid Structures” Composite and Structures, Vol. 81, No. 3, pp. 2525-2538, 2003.
[24] Nosier, A. Kapania, R. K. and Reddy, J. N., “Free Vibration Analysis of Laminated Plates Using a Layerwise Theory” The American Institute of Aeronautics and Astronautics Journals, Vol. 31, No. 12, pp. 2335—2346, 1993.
[25] Reddy, J. N., “Energy Principles and Variational Methods in Applied Mechanics” Second ed., .John Wiley, New York, 2002.
[26] Oden, J. T. and Reddy, J. N., “Variational Methods in Theoretical Mechanics” Second Edition, Springer- Verlag, Berlin, 1982.
[27] Lanczos, C., “The Variational Principles of Mechanics” The University of Toronto Press, Toronto, 1964.
[28] Shu, C., “Differential Quadrature and Its Application in Engineering” London, Springer-Verlag, pp. 10-150, 2000.
[29] Bert, C. W., and Malik, M., “Differential Quadrature Method in Computational Mechanics: a review” Applied Mechanic Review, Vol. 49, No. 1, pp. 1-28, 1996.
[30] AISI Alloy , http://www.azom.com/article.aspx, available in 20, March 2016.
[32] Touloukian, Y. S. Ho, C. Y., “Thermophysical Properties of Matter, Plenumpress” New York, pp. 740, 1972.
[33] All the Materials you need for Scientific and Industrial Research and Manufacturing, http://www.goodfellow.com/E/Carbon-EpoxyComposite-Tube.html. available in 20, March 2016.
[34] Johnson, R. R. Kural, M. H. Mackey, G. B., “Thermal expansion properties of composite materials” NASA Contractor Report 165632, 1981.
[35] Wei, W. Rongjin, H. Chuanjun, H. Zhao, Y. Li, S. Laifeng, L., “Cryogenic Performances of T700 and T800 Carbon Fibre–Epoxy Laminates” Proceedings of the School of Materials Science and Engineering, Tianjin University, China, 2015.
[36] Nelson, C. W. Ward, J. R., “Calcculation of Heat Tranfer to The Gun Barrel Wall” Ballistic Research Laboratory Aberdeen Proving Ground, Maryland, March 1981.
[37] Ian, J., “Understanding and Predicting Gun Barrel Erosion” Weapons Systems Division, August, 2005.
[38] Qu, P. Qiang, L. Zhen Y., “Thermal Analyses of Midwall Cooling Gun Tubes Based on Liquid-solid Coupled Method” Journal of Information & Computational Science, Vol. 11, No. 9, pp. 3241–3250, 2014.
[39] Qu, P. Qiang, Li. Shufang, Yang., “Thermal Analyses and Experimental Validation of External Cooling Method for a Gun Barrel” Journal of Information & Computational Science Vol. 11, No. 13, pp. 4759-4767, 2014.
[40] Masoumi, A. A. Rahimi, G. H. and Leyaghat, G. H., “ Experimental and Numeral Analysis of Composite metal Vessel under Dynamic Loading ” Modares Mechanical Engineering, Vol. 16, No. 5, pp. 51-62, 2016. (In Persian)
[41] Mikhail, M. D. Ozisiki, M. N. Vulchakov, N. L., “Diffusion in Composite Layers with Automatic Solution of the Eigenvalue Problem” International Journal of Heat and Mass Transfer. Vol. 26, No.8, pp. 1131-1141, 1983.
[42] Johnston, P. R., “Diffusion in Composite Media: Solution with Simple Eigenvalues and Eigenfunctions” Mathl. Comput. Modelling Vol. 15, No. 10, pp. 115-123, 1991.