[1]
Tsai, Chon L. and Kim, Dong S., "Analysis Of Fatigue Crack Propagation Behavior In Fillet Welded T-Joint" Engineering Fracture Mechanics, Vol. 36, No. 4, pp. 653-660, 1990.
|
[2]
|
Shenoi, RA. and Violette, FLM., "A Study Of Structural Composite Tee Joints In Small Boats" Journal Of Composite Materials, Vol. 24, No. 6, pp. 644-666, 1990.
|
[3]
|
Guo, S. and Morishima, R., "Design, Analysis And Testing Of Sandwich T-Joint Structures" 50 th AIAA/ASME/ASCE /AHS/ASC Structures, Structural Dynamics, and Materials Conference 17th, California, Palm Springs, 2009.
|
[4]
|
May, M. Ganzenmüller, G. Wolfrum, J. Heimbs, S., "Analysis Of Composite T-Joint Designs For Enhanced Resistance To Hydrodynamic Ram" Composite Structures, Vol. 125, pp. 188-194, 2015.
|
[5]
|
Theotokoglou, E.E., "Analytical Determination Of The Ultimate Strength Of Sandwich Beams" Applied Composite Materials,Vol. 3, No. 5, pp. 345-353, 1996.
|
[6]
|
Adams, R.D. Comyn, J. Wake, W.C., "Structural Adhesive Joints In Engineering", Springer Science & Business Media, 1997.
|
[7]
|
Kesavan, A., John, S., Herszberg, I., "Strain-Based Structural Health Monitoring Of Complex Composite Structures" Structural Health Monitoring, Vol.75, No. 1, pp. 313-320, 2008.
|
[8]
|
Whittingham, B. Li, H. Herszberg, I. Chiu, W., "Disbond Detection In Adhesively Bonded Composite Structures Using Vibration Signatures" Composite Structures, Vol. 75, No. 1, pp. 351-363, 2006.
|
[9]
|
Davies, G.A.O. Ankersen, J., "Virtual Testing Of Realistic Aerospace Composite Structures" Journal of Materials Science, Vol 43, No. 20, pp. 6586-6592, 2008.
|
[10]
|
Panigrahi, S.K., Pradhan, B., "Delamination Damage Analyses Of FRP Composite Spar Wingskin Joints With Modified Elliptical Adhesive Load Coupler Profile" Applied Composite Materials, Vol. 15, pp. 189-205, 2008.
|
[11]
|
Khalili, S.M.R. Ghaznavi, A., "Numerical Analysis Of Adhesively Bonded T-Joints With Structural Sandwiches And Study Of Design Parameters" International Journal of Adhesion and Adhesives, Vol. 31, No. 5, pp. 347-356, 2011.
|
[12]
|
Akpinar, S. Aydin, M.D. Temiz, Ö., "Non-Linear Stress Analysis On The Adhesively Bonded T-Joints With Embedded Supports" Composites Part B: Engineering, Vol. 53, pp. 314-323, 2013.
|
[13]
|
Park, Y.B. Lee, B.H. Kweon, J.H. Choi, J.H. Choi, I.H., "The Strength Of Composite Bonded T-Joints Transversely Reinforced By Carbon Pins" Composite Structures, Vol. 94, No. 2, pp. 625-634, 2012.
|
[14]
|
Stickler, P.B. Ramulu, M., "Experimental Study Of Composite T-Joints Under Tensile And Shear Loading" Advanced Composite Materials, Vol. 15, No. 2, pp. 193-210, 2006.
|
[15]
|
Stickler, P.B. Ramulu, M. Johnson, P.S., "Experimental And Numerical Analysis Of Transverse Stitched T-Joints In Bending" Composite Structures, Vol. 50, No. 1, pp. 17-27, 2000.
|
[16]
|
Nimje, S.V. Panigrahi, S.K., "Design And Analysis Of Functionally Graded Adhesively Bonded Double Supported Tee Joint Of Laminated FRP Composite Plates Under Varied Loading" Journal of Adhesion Science and Technology, Vol. 29, pp. 1951-1970, 2015.
|
[17]
|
Nimje, S.V. Panigrahi, S.K., "Interfacial Failure Analysis Of Functionally Graded Adhesively Bonded Double Supported Tee Joint Of Laminated FRP Composite Plates" International Journal of Adhesion and Adhesives, Vol. 58, pp. 70-79, 2015.
|
[18]
|
Apalak, M.K. Gunes, R., "Investigation Of Elastic Stresses In An Adhesively Bonded Single Lap Joint With Functionally Graded Adherends In Tension" Composite structures, Vol. 40, No. 4, pp. 444-467, 2005.
|
[19]
|
Gunes, R. Apalak, M.K. Yildirim, M., "The Free Vibration Analysis And Optimal Design Of An Adhesively Bonded Functionally Graded Single Lap Joint" International Journal of Mechanical Sciences, Vol. 49,No. 4, pp. 479-499, 2007.
|
[20]
|
Andrés, L., "Functionally Graded Joints by Dielectric Heating" MSc Thesis, University of Porto , 2013.
|
[21]
|
Carbas, R.J.C., "Adhesively Bonded Functionally Graded Joints" Ph.D Thesis, Porto, PORTO University, 2013.
|
[22]
|
Carbas, R.J.C. da Silva, L.F.M. Critchlow, G.W., "Adhesively Bonded Functionally Graded Joints By Induction Heating" AB2013, Porto, 2014.
|
[23]
|
Khalili, S.M.R. Shariyat M. Mokhtari, M., "Static Tensile And Transient Dynamic Response Of Cracked Aluminum Plate Repaired With Composite Patch – Numerical Study" Applied Composite Materials, Vol. 21, pp. 441-455, 2014.
|
[24]
|
Khalili, S.M.R. Mokhtari, M., "Numerical Study of Adhesive Single-Lap Joints with Composite Adherends Subjected to Combined Tension–Torsion Loads,” The Journal of Adhesion, pp. 214-234 , 2013.
|
[25]
|
Hashin, Z., "Failure Criteria For Unidirectional Fiber Composites" Journal of applied mechanics, Vol. 7.2, pp. 329-334, 1980.
|
[26]
|
Olmedo, Á. Santiuste, C., "On The Prediction Of Bolted Single-Lap Composite Joints" Composite Structures, Vol. 94, pp. 2127-2110, 2012.
|
[27]
|
Pilipchuk, V. Grace, I. Ibrahim, R. Ayorinde, E., "Structural Health Monitoring of Composite T-Joints Based on Distributed Effects of Localized Damages" 11th International Conference on Fast Sea Transportation FAST 2011, Honolulu, Hawaii, USA, September 2011.
|
[28]
|
Mokhtari, M., Salari, M. Abdoli, H. "Design and Manufacturing of Engineering Model of GEO Satellite Ku Band Antenna-Structual Design Reportation" Technical Report, Shahid Ghandi Center of Research, Iran, 2014. (In Persian)
|