1-
[1] Jamaati, R. Toroghinejad, M. R. Najafizadeh, A., “An Alternative Method of Processing Mmcs by CAR Process“, Materials Science and Engineering: A, Vol. 527, No. 10, pp. 2720-2724, 2010.
[2] Lee, D. Kim, B., “Nanostructured Cu–Al2O3 Composite Produced By Thermochemical Process For Electrode Application“, Materials Letters, Vol. 58, No. 3, pp. 378-383, 2004.
[3] Estrada-Guel, I. Carreño-Gallardo, C. Mendoza-Ruiz, D. Miki-Yoshida, M. Rocha-Rangel, E. Martínez-Sánchez, R., “Graphite Nanoparticle Dispersion in 7075 Aluminum Alloy by Means of Mechanical Alloying“, Journal of Alloys and Compounds, Vol. 483, No. 1, pp. 173-177, 2009.
[4] Li, L. Nagai, K. Yin, F., “Progress in Cold Roll Bonding of Metals“, Science and Technology of Advanced Materials, 2016.
[5] Lee, J. Bae, D. Chung, W. Kim, K. Lee, J. Cho, Y., “Effects of Annealing on The Mechanical and Interface Properties of Stainless Steel/Aluminum/Copper Clad-Metal Sheets“, Journal of Materials Processing Technology, Vol. 187, pp. 546-549, 2007.
[6] Ouyang, J. Yarrapareddy, E. Kovacevic, R., “Microstructural Evolution in The Friction Stir Welded 6061 Aluminum Alloy (T6-Temper Condition) To Copper“, Journal of Materials Processing Technology, Vol. 172, No. 1, pp. 110-122, 2006.
[7] Milner, D. Vaidyanath, L., “Significance of Surface Preparation in Cold Pressure Welding“, MET CONSTR BR WELD J, Vol. 7, pp. 1-6, 1960.
[8] Yong, J. Dashu, P. Dong, L. Luoxing, L., “Analysis of Clad Sheet Bonding by Cold Rolling“, Journal of Materials Processing Technology, Vol. 105, No. 1, pp. 32-37, 2000.
[9] Yahiro, A. Masui, T. Yoshida, T. Doi, D., “Development Of Nonferrous Clad Plate And Sheet By Warm Rolling With Different Temperature Of Materials“, ISIJ international, Vol. 31, No. 6, pp. 647-654, 1991.
[10] Madaah-Hosseini, H. Kokabi, A., “Cold Roll Bonding of 5754-Aluminum Strips“, Materials Science and Engineering: A, Vol. 335, No. 1, pp. 186-190, 2002.
[11] Danesh Manesh, H. Karimi Taheri, A., “Study of Mechanisms of Cold Roll Welding of Aluminium Alloy To Steel Strip“, Materials science and technology, Vol. 20, No. 8, pp. 1064-1068, 2004.
[12] Jamaati, R. Toroghinejad, M. R., “Effect of Friction, Annealing Conditions and Hardness on The Bond Strength of Al/Al Strips Produced by Cold Roll Bonding Process“, Materials & Design, Vol. 31, No. 9, pp. 4508-4513, 2010.
[13] Karakazov, N., Diffusion bonding of metals, Pergamon Press Oxford, 1985.
[14] Jamaati, R. Toroghinejad, M. R., “Investigation of The Parameters of The Cold Roll Bonding (CRB) Process“, Materials Science and Engineering: A, Vol. 527, No. 9, pp. 2320-2326, 2010.
[15] Eizadjou, M. Manesh, H. D. Janghorban, K., “Investigation of Roll Bonding Between Aluminum Alloy Strips“, Materials & Design, Vol. 29, No. 4, pp. 909-913, 2008.
[16] Manesh, H. D. Taheri, A. K., “The Effect of Annealing Treatment on Mechanical Properties of Aluminum Clad Steel Sheet“, Materials & design, Vol. 24, No. 8, pp. 617-622, 2003.
[17] Movahedi, M. Madaah-Hosseini, H. Kokabi, A., “The Influence of Roll Bonding Parameters on The Bond Strength of Al-3003/Zn Soldering Sheets“, Materials Science and Engineering: A, Vol. 487, No. 1, pp. 417-423, 2008.
[18] Abbasi, M. Toroghinejad, M. R., “Effects of Processing Parameters on The Bond Strength of Cu/Cu Roll-Bonded Strips“, Journal of Materials Processing Technology, Vol. 210, No. 3, pp. 560-563, 2010.
[19] Alizadeh, M. Paydar, M., “Study on The Effect of Presence of Tih 2 Particles on The Roll Bonding Behavior of Aluminum Alloy Strips“, Materials & Design, Vol. 30, No. 1, pp. 82-86, 2009.
[20] Tsuji, N. Saito, Y. Utsunomiya, H. Tanigawa, S., “Ultra-Fine Grained Bulk Steel Produced by Accumulative Roll-Bonding (ARB) Process“, Scripta Materialia, Vol. 40, No. 7, pp. 795-800, 3/5/, 1999.
[21] Shaarbaf, M. Toroghinejad, M. R., “Nano-Grained Copper Strip Produced by Accumulative Roll Bonding Process“, Materials Science and Engineering: A, Vol. 473, No. 1, pp. 28-33, 2008.
[22] Eizadjou, M. Talachi, A. K. Manesh, H. D. Shahabi, H. S. Janghorban, K., “Investigation of Structure and Mechanical Properties of Multi-Layered Al/Cu Composite Produced by Accumulative Roll Bonding (ARB) Process“, Composites Science and Technology, Vol. 68, No. 9, pp. 2003-2009, 2008.
[23] Yang, D. Cizek, P. Hodgson, P. Wen, C. E., “Ultrafine Equiaxed-Grain Ti/Al Composite Produced by Accumulative Roll Bonding“, Scripta materialia, Vol. 62, No. 5, pp. 321-324, 2010.
[24] Wu, K. Chang, H. Maawad, E. Gan, W. Brokmeier, H. Zheng, M., “Microstructure and Mechanical Properties of The Mg/Al Laminated Composite Fabricated By Accumulative Roll Bonding (Arb)“, Materials Science and Engineering: A, Vol. 527, No. 13, pp. 3073-3078, 2010.
[25] Jamaati, R. Toroghinejad, M., “Cold Roll Bonding Bond Strengths: Review“, Materials Science and Technology, Vol. 27, No. 7, pp. 1101-1108, 2011.
[26] Rahmatabadi, D. Hashemi, R., “Experimental Investigation of Fracture Surfaces and Mechanical Properties of AA1050 Aluminum Produced by Accumulative Roll Bonding Process“, Modares Mechanical Engineering, Vol. 16, No. 10, pp. 305-312, 2016. (in Persian )
[27] Pineau, A. Benzerga, A. A. Pardoen, T., “Failure of Metals III. Fracture and Fatigue of Nanostructured Metallic Materials“, Acta Materialia, 2015.