1-
[1] Kuo, C.M., Takahashi, H. and Chou, T.W., “Effect of Fiber Waviness on the Nonlinear Elastic Behavior of Flexible Composites”, Composite Materials, Vol. 22, pp. 1004-1022, 1988.
[2] Charette, R.F. and Hyer, M.W., “Innovative Design of Composite Structure: The Use of Curvilinear Fiber Format in Structural Design of Composites”, MSc Thesis, University of Maryland, USA, 1990.
[3] Hyer, M.W. and Charette, R.F., “Use of Curvilinear Fiber Format in Composite Structure Design”, AIAA Journal, Vol. 29, pp. 1011-1015, 1991.
[4] Hyer, M.W. and Lee, H.H., “The Use of Curvilinear Fiber Format to Improve Buckling Resistance of Composite Plates with Central Holes”, Composite Structures, Vol. 18, No. 3, pp. 239-261, 1991.
[5] Olmedo, R. and Gurdal, Z., “Buckling Response of Laminates with Spatially Varying Fiber Orientations”, 34th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, La Jolla, CA, pp. 2261-2269, 1993.
[6] Gurdal, Z., Tatting, B.F., and Wu, C.K., “Variable Stiffness Composite Panels: Effects of Stiffness Variation on the In-plane and Buckling Response”, Composites: Part A, Vol. 39, pp. 911–922, 2008.
[7] Lopes, C.S., Gurdal, Z. and Camanho P.P., “Tailoring for Strength of Composite Steered-Fibre Panels with Cutouts”, Composites: Part A, Vol. 41, pp. 1760–1767, 2010.
[8] Waldhart, C., Gurdal, Z. and C., Ribbens, “Analysis of Tow Placed, Parallel Fiber, Variable Stiffness Laminates”, Collection of technical papers—AIAA/ASME/ASCE/AHS/ASC structures, 20th structural dynamics and materials conference, Salt Lake City, UT, pp. 2210–2220, 1996.
[9] Tatting, B.F. and Gurdal, Z., “Design and Manufacture of Elastically Tailored Tow Placed Plates”, NASA/CR 2002-211919, pp. 1–14, 2002.
[10] Wu, Z., Weaver, P.M., Raju, G. and Kim, B.C., “Buckling Analysis and Optimization of Variable Angle Tow Composite Plates”, Thin-Walled Structures, Vol. 60, pp. 163–172, 2012.
[11] Wu, Z., Raju, G. and Weaver, P.M., “Buckling of VAT Plates Using Energy Methods”, 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, Hawaii, 2012.
[12] Arian Nik, M., Fayazbakhsh, K., Pasini, D. and L., Lessard, “Optimization of variable stiffness composites with embedded defects induced by Automated Fiber Placement”, Composite Structures, Vol. 107, pp. 160–166, 2014.
[13] Fayazbakhsh, K., “The Impact of Gaps and Overlaps on Variable Stiffness Composites Manufactured by Automated Fiber Placement”, PhD Thesis, McGill University, Canada, 2013.
[14] Fayazbakhsh, K., Arian Nik, M., Pasini, D. and Lessard, L., “Defect Layer Method to Capture Effect of Gaps and Overlaps in Variable Stiffness Laminates Made by Automated Fiber Placement”, Composite Structures, Vol. 97, PP. 245–251, 2013.
[15] Waldhart, C., “Analysis of Tow-Placed, Variable-Stiffness Laminates”, MSc Thesis, Virginia Polytechnic Institute and State University, USA, 1996.
[16] Arian Nik, M., Fayazbakhsh K., Pasini, D. and Lessard L., “Surrogate-based Multi-objective Optimization of a Composite Laminate with Curvilinear Fibers”, Composite Structures, Vol. 94, pp. 2306–2313, 2012.
[17] Gurdal, Z. and Olmedo, R., “In-plane Response of Laminates with Spatially Varying Fiber Orientations: Variable Stiffness Concept.”, AIAA Journal, Vol. 31, pp. 751–758, 1993.
[18] Blom, A.W., Lopes, C.S., Kromwijk, P.J., Gurdal, Z. and Camanho, P.P., “A Theoretical Model to Study the Influence of Tow-drop Areas on the Stiffness and Strength of Variable-stiffness Laminates”, Composite Materials, Vol. 43, pp. 403-425, 2009.
[19] Tatting, B.F., “Analysis and Design of Variable Stiffness Composite Cylinders”, PhD Thesis, Virginia Polytechnic Institute and State University, USA, 1998.
[20] Marouene, A., Boukhili, R., Chen, J. and Yousefpour, A., “Buckling behavior of variable-stiffness composite laminates manufactured by the tow-drop method”, Composite Structures, Vol. 139, pp. 243-253, 2016.
[21] Lopes, C.S., Camanho, P.P., Gurdal, Z. and Tatting, B.F., “Progressive failure analysis of tow-placed,variable-stiffness composite panels”, Vol. 44, pp. 8493-8516, 2007.
[22] Zamani, Z., Rahimi Sherbaf, GH. H. and Ghazavi, M., “Analysis of Composite Laminate with Curvilinear Fiber under Axial Compression”, In Persian, 17th Mechanic Conference, ISME, Tehran, Iran, 2009.
[23] Campen, V., “Optimum Lay-up Design of Variable Stiffness Composite Structures”, PhD Thesis, Delft University of Technology, Netherland, 2011.
[24] IJsselmuiden, S.T., “Optimal Design of Variable Stiffness Composite Structure Using Lamination Parameters”, PhD Thesis, Delft University of Technology, Netherland, 2011.