[1] Arefazar, A. and Shokoohi, Sh., “Polymer blends and alloys” Amirkabir University of Technology Publications, Tehran, Iran, pp. 1-3, 2010.
[2] Kazemi khasrag, E., Siadati, M.H. and Eslami-Farsani, R., “Effect of surface modification of graphene nanoplatelets on the high velocity impact behavior of basalt fibers reinforced polymer-based composites” In Persian, Journal of Science and Technology of Composites, Vol. 5, No. 1, pp. 109-116, 2018.
[3] Esmizadeh, E., Irani, A., Naderi, G., Ghoreishy, M.H.R. and Dobious, C., “Effect of carbon nanotube on PA6/ECO composites: morphology development, rheological, and thermal properties” Journal of Applied Polymer Science, Vol. 135, No. 12, pp. 45977, 2018.
[4] Attari, M., Arefazar, A. and Bakhshandeh, G., “Mechanical and thermal properties of toughened PA6/HDPE/SEBs‐G‐Ma/Clay nanocomposite” Polymer Engineering & Science, Vol. 55, No. 1, pp. 29-33, 2015.
[5] Mohsenzadeh, R. and Shelesh-Nezhad, K., “Experimental studies on the durability of PA6/PP/CaCO3 nanocomposite gears” In Persian, Journal of Science and Technology of Composites, Vol. 3, No. 2, pp. 147-156, 2016.
[6] Nguyen, H.D., Hong, V., Do. V. and Chun, D., “Effect of multiwalled carbon nanotubes on the mechanical properties of carbon fibre-reinforced polyamide-6/polypropylene comosites for lightweight automotive parts” Materials, Vol. 11, No. 3, pp. 429, 2018.
[7] Paran, S.M.R., Naderi, G., Ghoreishy, M.R. and Dubois, C., “Essential work of fracture and failure mechanisms in dynamically vulcanized thermoplastic elastomer nanocomposites based on PA6/NBR/XNBR-grafted HNTs” Engineering Fracture Mechanics, Vol. 200, pp. 251-262, 2018.
[8] Ghorbankhan, A., Nakhaei, M.R. and Safarpour, P., “Modeling and optimization of mechanical properties of PA6/NBR nanocomposite reinforced with perlite nanoparticles” In Persian, Journal of Science and Technology of Composites, Vol. 8, No. 1, pp. 1421-1430, 2021.
[9] Malek-Mohammadi, H., Majzoobi, G.H. and Payandehpeyman, J., “Experimental and analytical study of the compression behavior of graphene oxide and nano-clay reinforced polycarbonate nanocomposites at low strain rates”, In Persian, Journal of Science and Technology of Composites, Vol. 6, No. 3, pp. 427-434, 2019.
[10] Zinati, R.F., “Experimental evaluation of ultrasonic-assisted friction stir process effect on in situ dispersion of multi-walled carbon nanotubes throughout polyamide 6” The International Journal of Advanced Manufacturing Technology, Vol. 81, No. 9-12, pp. 2087-2098, 2015.
[11] Naderi, G.h., Razavi‐Nouri, M., Taghizadeh, E., Lafleur, P.G. and Dubois, C., “Preparation of thermoplastic elastomer nanocomposites based on polyamide-6/polyepichlorohydrin-co-ethylene oxide” Polymer Engineering & Science, Vol. 51, No. 2, pp. 278-284, 2011.
[12] Paran, S.M.R., Naderi, G. and Ghoreishy, M.R., “Effect of halloysite nanotube on microstructure, rheological and mechanical properties of dynamically vulcanized PA6/NBR thermoplastic vulcanizates” Soft Materials, Vol. 14, No. 3, pp. 127-139, 2016.
[13] Fagundes, E. and Jacobi, M.A., “PA/NBR TPVs: crosslink system and properties” Polímeros, Vol. 22, No. 2, pp. 206-212, 2012.
[14] Nakhaei, M.R., Mohammadi, Sh. and Naderi, G., “Experimental study of microstructure, thermal and mechanical properties of PA6/NBR nanocomposites reinforced with graphene nanoparticle” In Persian, Journal of Science and Technology of Composites, Vol. 6, No. 3, pp. 419-426, 2019.
[15] Nakhaei, M.R. and Ghorbankhan, A., “Experimental investigation on mechanical properties of PA6/NBR/graphene nanocomposite by response surface methodology” In Persian, Karafan Quarterly Scientific Journal, Vol. 18, No. 3, pp. 327-341, 2021.
[16] Ghorbankhan, A. and Nakhaei, M.R., “Microstructure and mechanical properties of polyamid 6/acrylonitrile-butadiene rubber nanocomposites fabricated by friction stir process” In Persian, International Journal of Engineering, Vol. 34, No.10, pp. 2371-2378, 2021.
[17] Ghorbankhan, A., Nakhaei, M.R. and Naderi, G., “Prediction and optimization of mechanical properties of PA6/NBR/graphene nanocomposites fabricated by friction stir processing” Journal of Elastomers & Plastics, Vol. 54, No.1, pp. 67-85, 2022.
[18] Zinati, R.F. and Razfar, M.R., “Finite element simulation and experimental investigation of friction stir processing of polyamide 6” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 229, No.12, pp. 2205-2215, 2015.
[19] Mostafapour, A., Naderi, G. and Nakhaei, M.R., “Effect of process parameters on fracture toughness of PP/EPDM/nanoclay nanocomposite fabricated by novel method of heat assisted friction stir processing” Polymer Composites, Vol. 39, No. 7, pp. 2336-2346, 2018.
[20] Nakhaei, M. R., Mostafapour, A., Dubois, C., Naderi, G., & Reza Ghoreishy, M. H. “Study of morphology and mechanical properties of PP/EPDM/clay nanocomposites prepared using twin‐screw extruder and friction stir process. Polymer composites” 40(8), pp. 3306-3314, 2019.
[21] Ning, N., Li, S., Wu, H., Tian, H., Yao, P., Hu, Guo-Hua., Tian, M. and Zhang, L, “Preparation, microstructure, and microstructure-properties relationship of thermoplastic vulcanizates (TPVs): A review” Progress in Polymer Science, Vol. 79, pp. 61-97, 2018.