[1] Yan, J. Clifton, K. Mecholsky, J. and Gower, L., “Effect of Temperature on the Fracture Toughness of Compact Bone,” Journal of Biomechanics, Vol. 40, no. 7, 2007.
[2] Lin, JT. Lane, JM., “Nonmedical management of osteoporosis,” Curr Opin Rheumatol. Vol. 14, pp. 441–6, 2002.
[3] Galibert, P. Deramond, H. Rosat, P. Le Gars, D., “Preliminary note on the treatment of vertebral angioma by percutaneous acrylic Vertebroplasty,” Neurochirurgie, pp. 33-166, 1987.
[4] Tam, LE. Pilliar, RM., “Fracture toughness of dentin/resin–composite adhesive interfaces,” J Dent Res, 1993.
[5] Khajotia, S. Dhuru, V. Fournelle, R. and Mckinney, M., “Fracture Toughness and Load Relaxation of Dentin Bonding Resin Systems,” Dental Materials Vol. 13, no. 3, 1997.
[6] Tan, H. Ao, H. Ma, R. and Tang, T., “Quaternised Chitosan-Loaded Polymethylmethacrylate Bone Cement: Biomechanical and Histological Evaluations,” Journal of Orthopaedic Translation Vol. 1, no. 1, pp. 57–66, 2013.
[7] Souza, M. DeMunck, J. Pongprueksa, P. VanEnde, A. and VanMeerbeek, B., “Correlative Analysis of Cement–Dentin Interfaces Using an Interfacial Fracture Toughness and Micro-Tensile Bond Strength Approach,” Dental Materials Vol. 32, no. 12, 1575–85, 2016.
[8] Tong, J., Wong, KY., and Lupton, C., “Determination of Interfacial Fracture Toughness of Bone–Cement Interface Using Sandwich Brazilian Disks,” Engineering Fracture Mechanics Vol. 74, no. 12, pp. 1904–16, 2007.
[9] MohammadAliha, M. Moosavi, A. MehriKhansari, N .and Safarabadi, M., “Effects of alumina and hydroxyapatite nanoparticles on fracture toughness of PMMA based dental composite,” In Persian, Journal of Science and Technology of Composites, Vol. 2, No. 2, pp. 9-16, 2015.
[10] Soares, JB. Tang, TX., “Bimaterial Brazilian specimen for determining interfacial fracture toughness,” Eng Fract Mech, 1998.
[11] Carrera, C.A. Chen, Y.C. Li, Y. Rudney, J. Aparicio, C. and Fok, A., “Dentin-Composite Bond Strength Measurement Using the Brazilian Disk Test,” Journal of Dentistry Vol. 52, pp. 37–44, 2016.
[12] Banks-Sills, L. and Schwartz, J., “Fracture testing of Brazilian disk sandwich specimens,” International journal of fracture, Vol. 118, No. 3, pp. 191-209, 2002.
[13] Pang, H.L.J. Bong, S.N. Shi, X.Q. and Wang, Z.P., “Mixed mode fracture toughness characterization for interface and interlayer cracks in adhesive bonded joints,” In International Symposium on Electronic Materials and Packaging, Cat. No. 00EX458, pp. 197-200, 2000.
[14] Ryoji, Y. JinQiao, L. Jin-Quan, X. Toshiaki, O. and Tomoyoshi, O. “Mixed mode fracture criteria for an interface crack,” Engineering Fracture Mechanics, Vol. 47, No. 3, pp. 367-377, 1994.
[15] Banks-Sills, L. Travitzky, N. and Ashkenazi, D., “Interface fracture properties of a bimaterial ceramic composite,” Mechanics of Materials, Vol. 32, No. 12, pp. 711-722, 2000.
[16] Asdollah-Tabar, M., Heidari-Rarani, M., & Aliha, M. R. M. “The effect of recycled PET bottles on the fracture toughness of polymer concrete,” Composites Communications, 100684, 2021.
[17] Kavanagh, J.L. and Pavier, M.J., “Rock interface strength influences fluid-filled fracture propagation pathways in the crust,” Journal of Structural Geology, Vol. 63, pp. 68-75, 2014.
[18] Aliha, M.R.M. and Mousavi, SS., “Sub-Sized Short Bend Beam Configuration for the Study of Mixed-Mode Fracture,” Engineering Fracture Mechanics Vol. 225, 2020.
[19] Mirsayar, M. and Park, P., “Modified maximum tangential stress criterion for fracture behavior of zirconia/veneer interfaces,” Journal of the mechanical behavior of biomedical materials, Vol. 59, pp. 236-240. 2016.
[20] Gladius, L., “Apparent Fracture Toughness of Acrylic Bone Cement: Effect of Test Specimen Configuration and Sterilization Method,” Biomaterials Vol. 20, pp. 69–78, 1999.
[21] Bokam, P. Germaneau, A. Rigoard, P. Vendeuvre, T. and Valle, V., “Evaluation of Fracture Properties of Cancellous Bone Tissues Using Digital Image Correlation/Wedge Splitting Test Method,” Journal of the Mechanical Behavior of Biomedical Materials Vol. 102, 2020.
[22] Mirsayar, M. Shi, X. and Zollinger, D. “Evaluation of interfacial bond strength between Portland cement concrete and asphalt concrete layers using bi-material SCB test specimen,” Engineering Solid Mechanics, Vol. 5, No. 4, pp. 293-306, 2017.
[23] Ajdani, A., Ayatollahi, M. R., Akhavan-Safar, A., & da Silva, L. F. M. “Mixed mode fracture characterization of brittle and semi-brittle adhesives using the SCB specimen,” International Journal of Adhesion and Adhesives, Vol. 101, 102629, 2020.
[24] Aliha, M. R. M., Kucheki, H. G., & Mirsayar, M. “Mixed Mode I/II Fracture Analysis of Bi-Material Adhesive Bonded Joints Using a Novel Short Beam Specimen,” Applied Sciences, Vol. 11, No. 11, pp. 5232, 2021.
[25] Mirsayar, M., “A modified maximum tangential stress criterion for determination of the fracture toughness in bi-material notches–Part 1: Theory,” Engineering Solid Mechanics, Vol. 2, No. 4, pp. 277-282, 2014.