The effect of fluid column pressure on the natural frequencies of an annular sector plate made of functionally graded material

Nasrollah Barati, Amir Hossein; Jafari, Ali Asghar; Etemadi Haghighi, Shahram; Maghsoudpour, Adel

doi:10.22068/jstc.2021.531588.1731

Document Type : Research Paper

Authors

¹ Department of Mechanical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran.

² Department of Mechanical Engineering, K. N. Toosi University, Tehran, Iran.

³ Department of Mechanical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran

10.22068/jstc.2021.531588.1731

Abstract

In this study, the effect of fluid dynamic pressure on the linear vibrations of annular sector plate made of Functionally Graded Material (FGM) is investigated. Analysis of the plate is based on First-order Shear Deformation Plate Theory (FSDT) with consideration of rotational inertial effects and transverse shear stresses. The governing equations of motion of the plate are derived by considering the kinetic and potential energies and using the Hamilton’s principle. Also, the pressure applied from the fluid to the plate is determined by solving the velocity potential function of the fluid and the velocity equality at the contact surface of the fluid and the sector in terms of vertical displacement of the sector. The shape of the studied plate modes is based on satisfying the boundary conditions of the plate. By placing hypothetical modes, harmonic responses and using the Galerkin method, the governing equation have become the characteristic equation and by using the semi-analytical method that used for all boundary conditions, the natural frequencies are obtained. Furthermore, the numerical results are presented for a sample plate and the effect of different parameters such as sector angle, boundary conditions, fluid density, and fluid height is investigated. Finally, the obtained results are validated without considering the fluid with previous researches, and in case of contact with the fluid with finite element model (ANSYS software).

Keywords

References

[1] Amiri, J.V., Nikkhoo, A., Davoodi, M.R., Hassanabadi, M.E., “Vibration analysis of a Mindlin elastic plate under a moving mass excitation by eigenfunction expansion method,” Thin-Walled Structures, Vol.62, pp.53-64, 2013.

[2] Hasheminejad, S.M., Khaani, H.A., Shakeri, R., “Free vibration and dynamic response of a fluid-coupled double elliptical plate system using Mathieu functions,” International Journal of Mechanical Sciences, Vol.75, pp.66-79, 2013.

[3] Askari, E., Jeong, K.H., Amabili, M., “Hydroelastic vibration of circular plates immersed in a liquid-filled container with free surface,” Journal of sound and vibration, Vol.332, No.12, pp.3064-85, 2013.

[4] Tariverdilo, S., Shahmardani, M., Mirzapour, J., Shabani, R., “Asymmetric free vibration of circular plate in contact with incompressible fluid,” Applied Mathematical Modelling, Vol.37, No.1-2, pp.228-39, 2013.

[5] Kwak, MK., Kim, K.C., “Axisymmetric vibration of circular plates in contact with fluid. Journal of Sound and Vibration,” Vol.146, No.3, pp.381-9, 1991.

[6] Kerboua, Y., Lakis, A.A., Thomas, M., Marcouiller, L., “Vibration analysis of rectangular plates coupled with fluid,” Applied Mathematical Modelling, Vol.32, No.12, pp.2570-86, 2008.

[7] Khorshidi, K., Akbari, F., Ghadirian, H., “Experimental and analytical modal studies of vibrating rectangular plates in contact with a bounded fluid,” Ocean Engineering, Vol.140, pp. 146-54, 2017.

[8] Civalek, Ö. “Application of differential quadrature (DQ) and harmonic differential quadrature (HDQ) for buckling analysis of thin isotropic plates and elastic columns,” Engineering Structures, Vol.26, No.2, pp.171-186, 2004.

[9] Hosseini-Hashemi, S., Karimi, M., Rokni, H., “Natural frequencies of rectangular Mindlin plates coupled with stationary fluid,” Applied Mathematical Modelling, Vol.36, No.2, pp.764-778, 2012.

[10] Yousefzadeh, S., Akbari, A., Najafi, M., “Dynamic response of FG rectangular plate in contact with stationary fluid under moving load”, In Persian, Journal of Science and Technology of Composites, Vol. 6, No. 2, pp. 213-224, 2019.

[11] Yousefzadeh, Sh. Jafari, A. and Mohammadzadeh, A., “Free vibration of a thick FG circular plate in contact with an inviscid and incompressible fluid”, In Persian, Iranian Journal of Mechanical Engineering, No.1, pp. 73-96, 2019.

[12] Shafiee, A.A., Daneshmand, F., Askari, E., Mahzoon, M., “Dynamic behavior of a functionally graded plate resting on Winkler elastic foundation and in contact with fluid,” Struct Eng Mech.; Vol.50, No.1, pp.53-71, 2014.

[13] Amabili, M., “Effect of finite fluid depth on the hydroelastic vibrations of circular and annular plates,” Journal of Sound and Vibration, Vol.193, No.4, pp.909-25, 1996.

[14] Canales, F.G., Mantari, JL., “Laminated composite plates in contact with a bounded fluid: Free vibration analysis via unified formulation,” Composite Structures, Vol.162, pp.374-87, 2017.

[15] Yousefzadeh, S., Jafari, A.A., Mohammadzadeh, A., Najafi, M., “Dynamic response of functionally graded annular/circular plate in contact with bounded fluid under harmonic load,” Structural engineering and mechanics, An international journal, Vol. 65, No.5, pp.523-33, 2018.

[16]Yousefzadeh, Sh. Jafari, A. and Mohammadzadeh, A., “Hydroelastic vibration analysis of functionally graded circular plate in contact with bounded fluid by Ritz method”,In Persian, Journal of Science and Technology of Composites, Vol. 5, No. 4, pp. 529-538, 2019.

[17] Endo, H., “The behavior of a VLFS and an airplane during takeoff/landing run in wave condition,” Marine structures, Vol.13, No.4-5, pp.477-91, 2000.

[18] Saidi, AR., Baferani, A.H., Jomehzadeh, E., “Benchmark solution for free vibration of functionally graded moderately thick annular sector plates” Acta mechanica, Vol.219, No.3, pp.309-35, 2011.

[19] Leissa, A.W., “Vibration of plates,” Scientific and Technical Information Division, National Aeronautics and Space Administration, 1969.

[20] Hejripour, F., Saidi, AR., “Nonlinear free vibration analysis of annular sector plates using differential quadrature method,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol.226, No.2, pp.485-497, 2012.

[21] Nie, G.J., Zhong, Z., “Vibration analysis of functionally graded annular sectorial plates with simply supported radial edges,” Composite Structures, Vol. 84, No.2, pp.167-76, 2008.

The effect of fluid column pressure on the natural frequencies of an annular sector plate made of functionally graded material

References

Volume 8, Issue 2September 2021Pages 1522-1531

Volume 8, Issue 2
September 2021
Pages 1522-1531