[1] Esmizadeh, E., Irani, A., Naderi, G., Ghoreishy, M. H. R. and Dobious, C., “Effect of Carbon Nanotube on Pa6/Eco Composites: Morphology Development, Rheological, and Thermal Properties“ Journal of Applied Polymer Science, Vol. 135, No. 12, pp. 45977, 2018.
[2] Nakhaei, M.R. Mohammadi, Sh. Naderi, Gh. and Ghoreishy, M.H.R. “Experimental Study of Microstructure, Thermal and Mechanical Properties of PA6/NBR Nanocomposites Reinforced with Graphene Nanoparticle”, In Persian, Journal of Science and Technology of Composites, Vol. 6, No.3, pp. 419-426, 2019.
[3] Malek-Mohammadi, H. Majzoobi, G.H. and Payandehpeyman, J., “Experimental and Analytical Study of the Compression Behavior of Graphene Oxide and Nano-clay Reinforced Polycarbonate Nanocomposites at Low Strain Rates ”, In Persian, Journal of Science and Technology of Composites, Vol. 6, No. 3, pp. 427-434, 2019
[4] Mohsenzadeh, R. and Shelesh-Nezhad, K., “Experimental Studies on the Durability of PA6-PP-CaCO3 Nanocomposite Gears,” In Persian, Journal of Science and Technology of Composites, Vol. 3, No. 2, pp. 147-156, 2016.
[5] Jiri, G., Handbook of Thermoplastic Elastomer, William Andrew Publishing, New York, 2007.
[6] Taghizadeh, E., Naderi, G. and Dubois, C., “Rheological and Morphological Properties of Pa6/Eco Nanocomposites“ Rheologica acta, Vol. 49, No. 10, pp. 1015-1027, 2010.
[7] Paran, S., Naderi, G., Ghoreishy, M. and Dubois, C., “Essential Work of Fracture and Failure Mechanisms in Dynamically Vulcanized Thermoplastic Elastomer Nanocomposites Based on Pa6/Nbr/Xnbr-Grafted Hnts“ Engineering Fracture Mechanics, Vol. 200, pp. 251-262, 2018.
[8] Nakhaei, M.-R., Mohammadi, S., Naderi, G. and Ghoreishy, M.-H., “Experimental Study of Microstructure, Thermal and Mechanical Properties of Pa6/Nbr Nanocomposites Reinforced with Graphene Nanoparticle“ Journal of Science and Technology of Composites, Vol. 6, No. 3, pp. 419-426, 2019.
[9] Haghgoo, M. Ansari Khalkhali, R. and Hassanzadeh-Aghdam, M. K., “Micromechanical Analysis of Electro-Elastic Response of Polymer Composites Reinforced With Fuzzy Fiber Containing CNTs”, In Persian, Journal of Science and Technology of Composites, Vol. 5, No. 4, pp. 485-498, 2019.
[10] Fagundes, E. and Jacobi, M. A., “Pa/Nbr Tpvs: Cross Link System and Properties“ POLIMEROS-CIENCIA E TECNOLOGIA, Vol. 22, No. 2, pp. 212-216, 2012.
[11] Mehrabzadeh, M. and Delfan, N., “Thermoplastic Elastomers of Butadiene‐Acrylonitrile Copolymer and Polyamide. Vi. Dynamic Crosslinking by Different Systems“ Journal of applied polymer science, Vol. 77, No. 9, pp. 2057-2066, 2000.
[12] Paran, S. R., Naderi, G. and Ghoreishy, M. R., “Effect of Halloysite Nanotube on Microstructure, Rheological and Mechanical Properties of Dynamically Vulcanized Pa6/Nbr Thermoplastic Vulcanizates“ Soft Materials, Vol. 14, No. 3, pp. 127-139, 2016.
[13] Sahraeian, R. and Esfandeh, M., “Mechanical and Morphological Properties of Ldpe/Perlite Nanocomposite Films“ Polymer Bulletin, Vol. 74, No. 4, pp. 1327-1341, 2017.
[14] Sahraeian, R., Hashemi, S., Esfandeh, M. and Ghasemi, I., “Preparation of Nanocomposites Based on Ldpe/Perlite: Mechanical and Morphological Studies“ Polymers and Polymer Composites, Vol. 20, No. 7, pp. 639-646, 2012.
[15] Haghnegahdar, M., Naderi, G. and Ghoreishy, M., “Fracture Toughness and Deformation Mechanism of Un-Vulcanized and Dynamically Vulcanized Polypropylene/Ethylene Propylene Diene Monomer/Graphene Nanocomposites“ Composites Science and Technology, Vol. 141, pp. 83-98, 2017.
[16] Nakhaei, M., Naderi, G. and Mostafapour, A., “Effect of Processing Parameters on Morphology and Tensile Properties of Pp/Epdm/Organoclay Nanocomposites Fabricated by Friction Stir Processing“ Iranian Polymer Journal, Vol. 25, No. 2, pp. 179-191, 2016.
[17] Nakhaei, M. R., Mostafapour, A. and Naderi, G., “Optimization of Mechanical Properties of Pp/Epdm/Clay Nanocomposite Fabricated by Friction Stir Processing with Response Surface Methodology and Neural Networks“ Polymer Composites, Vol. 38, pp. E421-E432, 2017.
[18] Naderi, G., Lafleur, P. G. and Dubois, C., “The Influence of Matrix Viscosity and Composition on the Morphology, Rheology, and Mechanical Properties of Thermoplastic Elastomer Nanocomposites Based on Epdm/Pp“ Polymer composites, Vol. 29, No. 12, pp. 1301-1309, 2008.
[19] Khodabandelou, M., Aghjeh, M. K. R. and Mazidi, M. M., “Fracture Toughness and Failure Mechanisms in Un-Vulcanized and Dynamically Vulcanized PP/EPDM/MWCNT Blend-Nanocomposites“ RSC Advances, Vol. 5, No. 87, pp. 70817-70831, 2015 .
[20] Jalilian, H. Naderi, G. and Shokoohi, S., “Investigation on the Microstructure and Properties of PVC Toughened with DOP/PMMA/Nano-Graphene”, In Persian, Journal of Science and Technology of Composites, Vol. 5, No. 3, pp. 451-456, 2018.
[21] Nakhaei, M., Arab, N.B, Naderi, G and Gollo, H., “Experimental study on optimization of CO2 laser welding parameters for polypropylene-clay nanocomposite welds”, Journal of Mechanical Science and Technology, Vol. 27, No. 3, pp. 843-848, 2013.