[1] Hassanpoor, F., Liaghat, G., Sabouri, H., Hadavi, H., “Experimental Study of the interaction of surfaces with aluminum honeycomb core in sandwich panels in the quasi-static and dynamic penetration“, In Persain, Journal of Science and Technology of Composites,Vol. 16, pp. 23-31, 2016.
[2] Hedayatian, M., Liaghat, G. H., Rahimi, G. H., Pol, M. H., “Numerical and Experimental Study of penetration of the projectile at high speed cylindrical honeycomb composites“, In Persian, Journal of Science and Technology of Composites, Vol. 14, pp. 17-26, 2014.
[3] Pirmohammadi, N., Liaghat, G., Pol, M. H., “Experimental Study on ballistic behavior of honeycomb core sandwich plates“, In Persian, Journal of Science and Technology of Composites, Vol. 14, pp. 17-26, 2014.
[4] S. Morye, P. Hine, R. Duckett, D. Carr, and I. Ward, "Modelling of the energy absorption by polymer composites upon ballistic impact," Composites Science and Technology, vol. 60, pp. 2631-2642, 2000.
[5] N. Naik and P. Shrirao, "Composite structures under ballistic impact," Composite structures, vol. 66, pp. 579-590, 2004.
[6] J. López-Puente, R. Zaera, and C. Navarro, "Experimental and numerical analysis of normal and oblique ballistic impacts on thin carbon/epoxy woven laminates," Composites Part A: applied science and manufacturing, vol. 39, pp. 374-387, 2008.
[7] W. Cantwell and J. Morton, "Comparison of the low and high velocity impact response of CFRP," Composites, vol. 20, pp. 545-551, 1989.
[8] D. Feng and F. Aymerich, "Finite element modelling of damage induced by low-velocity impact on composite laminates," Composite Structures, vol. 108, pp. 161-171, 2014.
[9] M. V. Donadon, L. Iannucci, B. G. Falzon, J. M. Hodgkinson, and S. F. M. de Almeida, "A progressive failure model for composite laminates subjected to low velocity impact damage," Computers & Structures, vol. 86, pp. 1232-1252, 2008.
[10] M. Donadon, #237, c. V., S. de Almeida, #233, r. F. M., M. A. Arbelo, and A. R. de Faria, "A Three-Dimensional Ply Failure Model for Composite Structures," International Journal of Aerospace Engineering, vol. 2009, 2009.
[11] Cervera, M., Chiumenti, M., “Mesh objective tensile cracking via a local continuum damage model and a crack tracking technique“, Computer Methods in Applied Mechanics and Engineering, Vol. 196, No. 1, pp. 304-320, 2006.
[12] Soutis, C., Beaumont, P. W., “Multi-scale modelling of composite material systems: The art of predictive damage modelling“, Elsevier, 2005.
[13] De Vree, J., Brekelmans, W., Van Gils, M., “Comparison of nonlocal approaches in continuum damage mechanics“, Computers & Structures, Vol. 55, No. 4, pp. 581-588, 1995.
[14] Kachanov, L., “Introduction to continuum damage mechanics“, Springer Science & Business Media, 1986.
[15] Kachanov, L. M., “on the creep rupture time (in russia)“, Izv. Akad Nauk, Vol. 8, pp. 26-31, 1958.
[16] Kondo, D., Welemane, H., Cormery, F., “Basic concepts and models in continuum damage mechanics“, Revue Européenne de Génie Civil, Vol. 11, No. 7-8, pp. 927-943, 2007.
[17] Rots, J., Nauta, P., Kuster, G., Blaauwendraad, J., “Smeared crack approach and fracture localization in concrete“, 1985.
[18] Kim, E.-H., Lee, I., Hwang, T.-K., “Low-Velocity Impact and Residual Burst-Pressure Analysis of Cylindrical Composite Pressure Vessels“, AIAA Journal, Vol. 50, No. 10, pp. 2180-2193, 2012.
[19] Matzenmiller, A., Lubliner, J., Taylor, R., “A constitutive model for anisotropic damage in fiber-composites“, Mechanics of materials, Vol. 20, No. 2, pp. 125-152, 1995.
[20] Kim, S. J., Goo, N. S., Kim, T. W., “Low-Velocity Impact and Residual Burst-Pressure Analysis of Cylindrical Composite Pressure Vessels “, Composites Science and Technology, Vol. 51, 1997.
[21] Turon Travesa, A., “Simulation of delamination in composites under quasi-static and fatigue loading using cohesive zone models“, Universitat de Girona, 2006.
[22] Camanho, P. P., Davila, C., De Moura, M., “Numerical simulation of mixed-mode progressive delamination in composite materials“, Journal of Composite Materials, Vol. 37, No. 16, pp. 1415-1438, 2003.
[23] Alimoradi, “Evaluation of damage caused by low-speed impact loads on composite sandwich plates“, In Persian, Master Thesis, Malek Ashtar University of Technology, 2007
[24] ABAQUS Analysis User Manual.
[25] Guo, W., Xue, P., Yang, J., “Nonlinear progressive damage model for composite laminates used for low-velocity impact“, Applied Mathematics and Mechanics, Vol. 34, pp. 1145-1154, 2013.
[26] Benzeggagh, M. L., Kenane, M., “Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus“, Composites Science and Technology, Vol. 56, No. 4, pp. 439-449, 1996.
[27] Chen, J.-F., Morozov, E. V., Shankar, K., “Simulating progressive failure of composite laminates including in-ply and delamination damage effects“, Composites Part A: Applied Science and Manufacturing, Vol. 61, pp. 185-200, 2014.
[28] Pandya, K. S., Pothnis, J. R., Ravikumar, G., Naik, N., “Ballistic impact behavior of hybrid composites“, Materials & Design, Vol. 44, pp. 128-135, 2013.