[1] Jafari, S.S., and Feli, S., “Analytical investigation of impact of blunt projectile with different ended into sandwich panels,” in Persian, Journal of Modeling in Engineering, Vol. 3, No. 42, pp. 65-77, 2015.
[2] Gustin, J., Joneson, A., Mahinfalah, M., Stone, J., “Low velocity impact of combination Kevlar/carbon fiber sandwich composites,” Composite structures, Vol. 69, No. 4, pp. 396-406, 2005.
[3] Mahdian, M., and Ebrahimi, H., “Analytical and numerical analysis of low speed impact on sandwich panel with metal and polyurethane foam core,” in Persian, The International Conference on New Research in Industry and Mechanical Engineering.
[4] Fan, J., Cantwell, W., Guan, Z., “The low-velocity impact response of fiber-metal laminates,” Reinforced Plastics and Composites, Vol. 30, No. 1, pp. 26-35, 2011.
[5] Chen, C., Justice, R. S., Schaefer, D. W., Baur, J. W., “Highly dispersed nanosilica–epoxy resins with enhanced mechanical properties,” Polymer, Vol. 49, pp. 3805-3815, 2008.
[6] Ghofrani, M., Pishan, S., Talaei, A., “The effect of core type and skin on the mechanical properties of lightweight sandwich Panels,” in Persian, Iranian Journal of Wood and Paper Science Research, Vol. 28, No. 4, pp.720-731, 2014.
[7] Azarafza, R., Davar, A., and Mahmoodi, A., “Three-point bending test of metal and composite sandwich panels with grid stiffened core,” in Persian, Journal of Science and Technology of Composites, Vol. 3, No. 4, pp. 377-388, 2017.
[8] Khoshgoftar, M., Liaghat, G., “Experimental and Numerical Investigation of Perforation Behavior of Composite Laminates Reinforced with Carbon Nanotubes,” in Persian, Tarbiat Modares University, Mechanical Engineering Department, 2010.
[9] Payganeh, Gh., Malekzade Fard K., Rashed Saghavaz, F., and Asgari, M., “Analysis of laminated composite sandwich plates with magnetorheological fluid core under low velocity impact,” in Persian, Modares Mechanical Engineering, Vol. 16, No. 12, pp. 114-124, 2016.
[10] Alavi Nia, A., and Kazemi, M., “Analytical study of high velocity impact on sandwich panels with foam core and aluminum face-sheets,” in Persian, Modares Mechanical Engineering, Vol. 15, No. 6, pp.231-239, 2015.
[11] Malekzadeh Fard, K., Ebrahimi, M., Nazari, A., and Irani, S., “Buckling Analysis of Composite Sandwich Panel with Symmetric FGM Core,” in Persian, Using Improved High-order Theory, Aerospace Mechanics Journal, Vol. 8, No. 1, pp. 55-70, 2012.
[12] Pirmohammadi, N., Liaghat, Gh. H., Pol, M. H., and Sabouri, H., “Analytical, experimental and numerical investigation of sandwich panels made of honeycomb core subjected projectile impact,” in Persian, Modares Mechanical Engineering, Vol. 14, No. 5, pp. 153-164, 2014
[13] Hassanpour Roudbeneh, F., Liaghat, Gh., Sabouri, H., Hadavinia, H., “Investigation of Interaction between Aluminum Facing and Honeycomb Structure in Quasi-static and Impact Loading,” in Persian, Modares Mechanical Engineering, Vol. 16, No. 7, pp. 23-31, 2016
[14] Jabbari, M., Tatari, A. A., and Ghafari, M., “Effect of Faces Type and Thickness on Mechanical Properties of Sandwich Panels,” in Persian, Iranian Journal of Wood and Paper Industries, Vol. 5, No. 1, pp. 85-92, 2014.
[15] Reis, P., Santos, P., J.A.M. Ferreira, M. Richardson, “Impact response of sandwich composites with nano-enhanced epoxy resin,” in Persian, Journal of Reinforced Plastics and Composites, Vol. 32, No. 12, pp. 898-906, 2018.
[16] Khansari, M., Khodarahmi H., Vaziri, A., “Experimental study of ballistic properties of hybrid aluminum and epoxy matrix composite reinforced with carbon nanotube,” in Persian, Modares Mechanical Engineering, Vol. 17, No. 8, pp. 126-132, 2017.
[17] Hassanpour Roudbeneh, F., Liaghat, Gh., Sabouri, H., “Experimental Investigation of foam filled Sandwich Panels in Concentrated and Distributed Compressive loading,” in Persian, Modares Mechanical Engineering, Vol. 16, No. 12, pp. 648-656, 2016.
[18] Payganeh, Gh., Ghasemi, I., Rahmani, M., Kazemnejad, A., “An investigation on the impact properties of nanocomposite based on polypropylene/graphene nanosheets/ nano clay using response surface methodology,” in Persian, Modares Mechanical Engineering, Vol. 15, No. 9, pp. 271-279, 2015.
[19] Pramanik, B., Raju Mantena, P., “Energy Absorption of Nano-Reinforced and Sandwich Composites in Ballistic and Low-Velocity Punch-Shear,” Open Journal of Composite Materials, Vol. 2, No. 3, pp. 87-96, 2012.
[20] Hoo Fatt, M. S., Park, K. S., “Dynamic model for low-velocity impact damage of composite sandwich panels – part A: Deformation,” Composite Structures, Vol. 52, pp. 335-351, 2001.
[21] Haque, A., Shamsuzzoha, M., Hussain, F., Dean, D., “S2-Glass/Epoxy polymer nanocomposites: manufacturing, structures, thermal and mechanical properties,” Journal of Composite Materials, Vol. 37, pp. 1821-1837, 2003.
[22] Khodaei, M., Haghighi-Yazdi, M., Safarabadi, M., “Numerical modeling of high velocity impact in sandwich panels with honeycomb core and composite skin including composite progressive damage model,” Journal of Sandwich Structures & Materials, doi.org/10.1177/1099636218817894
[23] Vishwas, M., Joladarashi, sh.,Kulkarani SM., “Investigation on effect of using rubber as core material in sandwich composite plate subjected to low velocity normal and oblique impact loading,”Scientia Iranica, Vol. 26, No. 2, pp897-907.
[24] Khondabi, R., Khodarahmi, H., Hosseini, R., Zia Shamami, M., “Experimental and numerical investigation into the effect of core density on the energy absorption of sandwich panels with Aluminum face sheets and Polyurethane foam core,” in Persian, Amirkabir Journal of Mechanical Engineering, Vol. 52, No. 10, pp. 131-140, 2019.