[1] Xia M., Takayanagi H., and Kemmochi K. “Analysis of multi-layered filament-wound composite pipes under internal pressure,” Composite Structures, 2001. 53(4): p. 483-491.
[2] Wakayama S., et al., “Evaluation of burst strength of FW-FRP composite pipes after impact using pitch-based low-modulus carbon fiber,” Composites Part A: Applied Science and Manufacturing, 2006. 37(11): p. 2002-2010.
[3] Onder A., et al., “Burst failure load of composite pressure vessels,” Composite structures, 2009. 89(1): p. 159-166
[4] Kaynak C. and Mat O. “Uniaxial fatigue behavior of filament-wound glass-fiber/epoxy composite tubes,” Composites Science and Technology, 2001. 61(13): p. 1833-1840.
[5] Rousseau J., Perreux D. and Verdiere N. “The influence of winding patterns on the damage behaviour of filament-wound pipes,” Composites Science and Technology, 1999. 59(9): p. 1439-1449.
[6] Parashar A. and Mertiny P. “Impact of scaling on fracture strength of adhesively bonded fibre-reinforced polymer piping,” Procedia Engineering, 2011. 10: p. 455-459.
[7] Das R. and Baishya N. “Failure analysis of bonded composite pipe joints subjected to internal pressure and axial loading,” Procedia Engineering, 2016. 144: p. 1047-1054.
[8] Kumar S. and Khan M. “An elastic solution for adhesive stresses in multi-material cylindrical joints,” International Journal of Adhesion and Adhesives, 2016. 64: p. 142-152.
[9] Sulu I.Y. and Temiz S. “Failure and stress analysis of internal pressurized composite pipes joined with sleeves,” Journal of Adhesion Science and Technology, 2018. 32(8): p. 816-832.
[10] Kachanov L.M., “Time of the rupture process under creep conditions,” Izy Akad. Nank SSR Otd Tech Nauk, 1958. 8: p. 26-31.
[11] Chaboche J-L., “Continuous damage mechanics—a tool to describe phenomena before crack initiation,” Nuclear Engineering and Design, 1981. 64(2): p. 233-247.
[12] Murakami S., “Notion of continuum damage mechanics and its application to anisotropic creep damage theory,” Journal of Engineering Materials and Technology, 1983. 105(2): p. 99-105.
[13] Ladeveze P. and Lemaitre J. “Damage effective stress in quasi unilateral conditions,” in 16th International congress of theoretical and applied mechanics, Lyngby, Denmark. 1984.
[14] Matzenmiller A., Lubliner J. and Taylor R. “A constitutive model for anisotropic damage in fiber-composites,” Mechanics of materials, 1995. 20(2): p. 125-152.
[15] Hashin Z., “Failure criteria for unidirectional fiber composites,” Journal of applied mechanics, 1980. 47(2): p. 329-334.
[16] Maimí P., et al., “A thermodynamically consistent damage model for advanced composites,” 2006.
[17] Ochoa O.O. and Engblom J.J. “Analysis of progressive failure in composites,” Composites Science and Technology, 1987. 28(2): p. 87-102.
[18] Gotsis P., Chamis C. and Minnetyan L. “Application of progressive fracture analysis for predicting failure envelopes and stress-strain behaviors of composite laminates,” a comparison with experimental results, in Failure Criteria in Fibre-Reinforced-Polymer Composites. 2004, Elsevier. p. 703-725.
[19] Tang X., et al., “Progressive failure analysis of 2× 2 braided composites exhibiting multiscale heterogeneity,” Composites Science and Technology, 2006. 66(14): p. 2580-2590.
[20] Chapelle D. and Perreux D. “Optimal design of a Type 3 hydrogen vessel: Part I—Analytic modelling of the cylindrical section,” International Journal of Hydrogen Energy, 2006. 31(5): p. 627-638.
[21] Cohen D., “Influence of filament winding parameters on composite vessel quality and strength,” Composites Part A: Applied Science and Manufacturing, 1997. 28(12): p. 1035-1047.
[22] Cohen D., Mantell S.C. and Zhao L. “the effect of fiber volume fraction on filament wound composite pressure vessel strength,” Composites Part B: Engineering, 2001. 32(5): p. 413-429.
[23] Perreux D., Robinet P. and Chapelle D. “The effect of internal stress on the identification of the mechanical behaviour of composite pipes,” Composites Part A: Applied Science and Manufacturing, 2006. 37(4): p. 630-635.
[24] Ferry L., et al., “Interaction between plasticity and damage in the behaviour of [+ φ, − φ] n fibre reinforced composite pipes in biaxial loading (internal pressure and tension),” Composites Part B: Engineering, 1998. 29(6): p. 715-723.
[25] Liu P.F. and Zheng J. “Progressive failure analysis of carbon fiber/epoxy composite laminates using continuum damage mechanics,” Materials Science and Engineering: A, 2008. 485(1-2): p. 711-717.
[26] Xu P., Zheng J. and Liu P. “Finite element analysis of burst pressure of composite hydrogen storage vessels,” Materials & Design, 2009. 30(7): p. 2295-2301.
[27] Doh Y. and Hong C. “Progressive failure analysis for filament wound pressure vessel,” Journal of reinforced plastics and composites, 1995. 14(12): p. 1278-1306.
[28] Tzeng J.T. “Dynamic fracture of composite overwrap cylinders,” Journal of reinforced plastics and composites, 2000. 19(1): p. 2-14.
[29] Minnetyan L., Gotsis P.K. and Chamis C.C. “Progressive damage and fracture of unstiffened and stiffened composite pressure vessels,” Journal of reinforced plastics and composites, 1997. 16(18): p. 1711-1724.
[30] Lapczyk I. and Hurtado J.A. “Progressive damage modeling in fiber-reinforced materials,” Composites Part A: Applied Science and Manufacturing, 2007. 38(11): p. 2333-2341.
[31] Liu P., et al., “Numerical simulation and optimal design for composite high-pressure hydrogen storage vessel,” A review. Renewable and Sustainable Energy Reviews, 2012. 16(4): p. 1817-1827.
)