[1]Nassar, M. M., Arunachalam, R. and Alzebdeh, K. I., “Machinability of Natural Fiber Reinforced Composites: A Review“ The International Journal of Advanced Manufacturing Technology, Vol. 88, No. 9-12, pp. 2985-3004, 2017.
[2]Patil, A. and Shende, M., “Experimental and Analytical Investigation of Drilling of Sandwich Composites: A Review“ methodology, Vol. 27, No. 3, 2013.
[3]Jones, R. M., “Mechanics of Composite Materials“, CRC press, 2014.
[4]Kaw, A. K., “Mechanics of Composite Materials“, CRC press, 2005.
[5]Mohan, N., Kulkarni, S. and Ramachandra, A., “Delamination Analysis in Drilling Process of Glass Fiber Reinforced Plastic (Gfrp) Composite Materials“ Journal of Materials Processing Technology, Vol. 186, No. 1-3, pp. 265-271, 2007.
[6]Saeed Amini, M. B., “Statistical Study of the Effect of Various Machining Parameters on Delamination in Drilling of Carbon Fiber Reinforced Composites, in Persian“, Vol. 5, No. 1, pp. 41-50, 2018.
[7]Babu, J., Paul, L. and Davim, J. P., “High Speed Machining of Composite Materials“ in: High Speed Machining, Eds., pp. 63-96 Elsevier, 2020.
[8]Jain, A. K., Narasaiah, K. and Gopinath, S., “Machining of Thin Walls and Thin Floor Aerospace Components Made of Aluminum Alloy with High Aspect Ratio“ in Proceeding of Trans Tech Publ, pp. 112-115, 2015..
[9]Mane, I., Gagnol, V., Bouzgarrou, B. and Ray, P., “Stability-Based Spindle Speed Control During Flexible Workpiece High-Speed Milling“ International Journal of Machine Tools and Manufacture, Vol. 48, No. 2, pp. 184-194, 2008.
[10]Jain, A. and Bajpai, V., “Introduction to High-Speed Machining (Hsm)“ in: High Speed Machining, pp. 1-25, 2020.
[11]Hamlaoui, N., Azzouz, S., Chaoui, K., Azari, Z. and Yallese, M.-A., “Machining of Tough Polyethylene Pipe Material: Surface Roughness and Cutting Temperature Optimization“ The International Journal of Advanced Manufacturing Technology, Vol. 92, No. 5-8, pp. 2231-2245, 2017.
[12]celik, Y. H., Kilickap, E. and Kilickap, A. İ., “An Experimental Study on Milling of Natural Fiber (Jute)-Reinforced Polymer Composites“ Journal of Composite Materials, 2019.
[13]Prasanth, I., Ravishankar, D., Hussain, M. M., Badiganti, C. M., Sharma, V. K. and Pathak, S., “Investigations on Performance Characteristics of Gfrp Composites in Milling“ The International Journal of Advanced Manufacturing Technology, Vol. 99, No. 5-8, pp. 1351-1360, 2018.
[14]Nurullah, F. P., Pramujati, B., Suhardjono, Effendi, M. K., Soepangkat, B. O. P. and Norcahyo, R., “Multi Response Prediction of End-Milling Cfrp with Backpropagation Neural Network“ in Proceeding of AIP Publishing LLC, pp. 1-13, 2019.
[15]Adeniji, D., Schoop, J., Gunawardena, S., Hanson, C. and Jahan, M., “Characterization and Modeling of Surface Roughness and Burr Formation in Slot Milling of Polycarbonate“ Journal of Manufacturing and Materials Processing, Vol. 4, No. 2, pp. 59, 2020.
[16]www. and afzir.com, Specification Sheet, December 2018.
[17]Izamshah, R., Mo, J. and Ding, S.,“Hybrid Deflection Prediction on Machining Thin-Wall Monolithic Aerospace Components“ Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 226, No. 4, pp. 592-605, 2012.
[18]Manikandan, H., Sreejith, S., Vivek, K., Jayaram, C. S. and Azeemhafiz, P., “Error Compensation Strategies for Workpiece Deflection During End Milling of Thin-Walled Straight and Curved Geometries“ in: Recent Trends in Mechanical Engineering, Eds., pp. 249-258, 2020.
[19] Yosefitabar, M., matipour, M., “Study of surface roughness in high speed milling of 1.7765 hard alloyed steel“ in Persian, Modares Mechanical Engineering, Proceedings of the Advanced Machining and Machine Tools Conference, Vol. 15, No. 20, pp. 86-89, 2016.
[20] Seguy, S., Dessein, G. and Arnaud, L., “Surface Roughness Variation of Thin Wall Milling, Related to Modal Interactions“ International Journal of Machine Tools and Manufacture, Vol. 48, No. 3-4, pp. 261-274, 2008.
[21] Ghoreishi, R., Roohi, A. H. and Ghadikolaei, A. D., “Analysis of the Influence of Cutting Parameters on Surface Roughness and Cutting Forces in High Speed Face Milling of Al/Sic Mmc“ in Persian, Materials Research Express, Vol. 5, No. 8, 2018.
[22] Imani, L., Rahmani Henzaki, A., Hamzeloo, R. and Davoodi, B., “Modeling and Optimizing of Cutting Force and Surface Roughness in Milling Process of Inconel 738 Using Hybrid Ann and Ga“ in Persian Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 234, No. 5, pp, 920-932, 2020.
[23] Pal, P., Prabhu, R. and Sakthimurugan, K., “Surface Error Compensation in Hsm of Thin Wall Structures“ International Journal of Engineering Science Invention, Vol. 2, No. 2, pp. 2319-6734, 2013.
[24] Boothroyd, G., “Fundamentals of Metal Machining and Machine Tools“, Crc Press, 1988.
[25] Arnaud, L., Gonzalo, O., Seguy, S., Jauregi, H. and Peigné, G., “Simulation of Low Rigidity Part Machining Applied to Thin-Walled Structures“ The International Journal of Advanced Manufacturing Technology, Vol. 54, No. 5-8, pp. 479-488, 2011.
[26] Sonawane, S. A. and Pawar, A. P., “Effect of Cutting Variables of End Milling Process on Surface Roughness and Machining Vibrations“ in: Techno-Societal 2018, Eds., pp. 661-670: Springer, 2020.