[1] Rahmatabadi, D., Hashemi, R., Mohammadi, B. and Shojaee, T., “Experimental Evaluation of the Plane Stress Fracture Toughness for Ultra-Fine Grained Aluminum Specimens Prepared by Accumulative Roll Bonding Process“ Materials Science and Engineering A, Vol. 708, pp. 301-310, 2017.
[2] Abdollah-Zadeh, A., Saeid, T., Sazgari, B., “Microstructural and mechanical properties of friction stir welded aluminum/copper lap joints“, Journal of Alloys and Compounds, Vol. 460, No. 1, pp. 535-538, 2008.
[3]Mondolfo, L. F., “Aluminum Alloys: Structure and Properties“, Elsevier, 2013.
[4]Keles, O. and Dundar, M., “Aluminum Foil: Its Typical Quality Problems and Their Causes“ Journal of Materials Processing Technology, Vol. 186, No. 1-3, pp. 125-137, 2007.
[5]Rahmatabadi, D., Shahmirzaloo, A., Hashemi, R. and Farahani, M., “Using Digital Image Correlation for Characterizing the Elastic and Plastic Parameters of Ultrafine-Grained Al 1050 Strips Fabricated Via Accumulative Roll Bonding Process“ Materials Research Express, Vol. 6, No. 8, pp. 086542, 2019.
[6]Valiev, R. Z. and Langdon, T. G., “Principles of Equal-Channel Angular Pressing as a Processing Tool for Grain Refinement“ Progress in Materials Science, Vol. 51, No. 7, pp. 881-981, 2006.
[7]Rahmatabadi, D., Tayyebi, M., Hashemi, R. and Faraji, G., “Microstructure and Mechanical Properties of Al/Cu/Mg Laminated Composite Sheets Produced by the Arb Proces“ International Journal of Minerals, Metallurgy and Materials, Vol. 25, No. 5, pp. 564-572, 2018.
[8]Ouyang, J., Yarrapareddy, E., Kovacevic, R., “Microstructural evolution in the friction stir welded 6061 aluminum alloy (T6-temper condition) to copper“, Journal of Materials Processing Technology, Vol. 172, No. 1, pp. 110-122, 2006.
[9]Rahmatabadi, D., Tayyebi, M., Sheikhi, A. and Hashemi, R., “Fracture Toughness Investigation of Al1050/Cu/Mgaz31zb Multi-Layered Composite Produced by Accumulative Roll Bonding Process“ Materials Science and Engineering A, Vol. 734, pp. 427-436, 2018.
[10]Rahmatabadi, D., Mohammadi, B., Hashemi, R. and Shojaee, T., “An Experimental Study of Fracture Toughness for Nano/Ultrafine Grained Al5052/Cu Multilayered Composite Processed by Accumulative Roll Bonding“ Journal of Manufacturing Science and Engineering, Transactions of the ASME, Vol. 140, No. 10, 2018.
[11]Rahmatabadi, D. and Hashemi, R., “Experimental Investigation of Fracture Surfaces and Mechanical Properties of Aa1050 Aluminum Produced by Accumulative Roll Bonding Process“ Modares Mechanical Engineering, Vol. 16, No. 10, pp. 305-312, 2016.
[12]Rahmatabadi, D., Tayyebi, M., Hashemi, R. and Faraji, G., “Evaluation of Microstructure and Mechanical Properties of Multilayer Al5052–Cu Composite Produced by Accmulative Roll Bonding“ Powder Metallurgy and Metal Ceramics, Vol. 57, No. 3-4, pp. 144-153, 2018.
[13]Saito, Y., “Ultra-Fine Grained Bulk Aluminum Produced by Accumulative Roll-Bonding (Arb) Process“ Scripta Mater., Vol. 39, No. 9, pp. 1221-1227, 1998.
[14]Lee, S., Saito, Y., Sakai, T. and Utsunomiya, H., “Microstructures and Mechanical Properties of 6061 Aluminum Alloy Processed by Accumulative Roll-Bonding“ Materials Science and Engineering: A, Vol. 325, No. 1-2, pp. 228-235, 2002.
[15]Huang, X., Tsuji, N., Hansen, N. and Minamino, Y., “Microstructural Evolution During Accumulative Roll-Bonding of Commercial Purity Aluminum“ Materials Science and Engineering: A, Vol. 340, No. 1-2, pp. 265-271, 2003.
[16]Park, K.-T., Kwon, H.-J., Kim, W.-J. and Kim, Y.-S., “Microstructural Characteristics and Thermal Stability of Ultrafine Grained 6061 Al Alloy Fabricated by Accumulative Roll Bonding Process“ Materials Science and Engineering: A, Vol. 316, No. 1-2, pp. 145-152, 2001.
[17]Mozaffari, A., Manesh, H. and Janghorban, K., “Evaluation of Mechanical Properties and Structure of Multilayered Al/Ni Composites Produced by Accumulative Roll Bonding (Arb) Process“ Journal of Alloys and Compounds, Vol. 489, No. 1, pp. 103-109, 2010.
[18]Zhang, R. and Acoff, V. L., “Processing Sheet Materials by Accumulative Roll Bonding and Reaction Annealing from Ti/Al/Nb Elemental Foils“ Materials Science and Engineering: A, Vol. 463, No. 1, pp. 67-73, 2007.
[19] Jamaati, R., Toroghinejad, M. R., Najafizadeh, A., “An alternative method of processing MMCs by CAR process“, Materials Science and Engineering: A, Vol. 527, No. 10, pp. 2720-2724, 2010.
[20] ASTM, E., “Standard Test Methods for Tension Testing of Metallic Materials“ Annual book of ASTM standards. ASTM, 2001.
[21] Naseri, M., Hassani, A. and Tajally, M., “Fabrication and Characterization of Hybrid Composite Strips with Homogeneously Dispersed Ceramic Particles by Severe Plastic Deformation“ Ceramics International, Vol. 41, No. 3, pp. 3952-3960, 2015.
[22] Barsoum, I. and Faleskog, J., “Rupture Mechanisms in Combined Tension and Shear—Experiments“ International Journal of Solids and Structures, Vol. 44, No. 6, pp. 1768-1786, 2007.
[23] Ceschini, L., Minak, G. and Morri, A., “Tensile and Fatigue Properties of the Aa6061/20 Vol% Al2o3p and Aa7005/10 Vol% Al2o3p Composites“ Composites Science and Technology, Vol. 66, No. 2, pp. 333-342, 2006.
[24] Yan, H. and Lenard, J. G., “A Study of Warm and Cold Roll-Bonding of an Aluminium Alloy“ Materials Science and Engineering: A, Vol. 385, No. 1-2, pp. 419-428, 2004.
[25] Rahmatabadi, D., Shahmirzaloo, A., Farahani, M., Tayyebi, M. and Hashemi, R., “Characterizing the Elastic and Plastic Properties of the Multilayered Al/Brass Composite Produced by Arb Using Dic“ Materials Science and Engineering A, Vol. 753, pp. 70-78, 2019.
[26] Azushima, A., Kopp, R., Korhonen, A., Yang, D., Micari, F., Lahoti, G., Groche, P., Yanagimoto, J., Tsuji, N. and Rosochowski, A., “Severe Plastic Deformation (Spd) Processes for Metals“ CIRP Annals, Vol. 57, No. 2, pp. 716-735, 2008.
[27] Alizadeh, M. and Samiei, M., “Fabrication of Nanostructured Al/Cu/Mn Metallic Multilayer Composites by Accumulative Roll Bonding Process and Investigation of Their Mechanical Properties“ Materials & Design, Vol. 56, pp. 680-684, 2014.
[28] Saito, Y., Tsuji, N., Utsunomiya, H., Sakai, T. and Hong, R., “Ultra-Fine Grained Bulk Aluminum Produced by Accumulative Roll-Bonding (Arb) Process“ Scripta materialia, Vol. 39, No. 9, pp. 1221-1227, 1998.
[29] Lee, S., Saito, Y., Tsuji, N., Utsunomiya, H. and Sakai, T., “Role of Shear Strain in Ultragrain Refinement by Accumulative Roll-Bonding (Arb) Process“ Scripta Materialia, Vol. 46, No. 4, pp. 281-285, 2002.