[1] Shenoy, R. A., Wellicome, J.F.,Composite Materials in maritime structures; Vol. 1: Fundamental Aspect,’’ .Cambridge University Press, UK, 1993.
[2] Chawla, K., Composite Materials: Science and engineering, Springer, 2013.
[3] Messager, T., Pyrz, M., Gineste, B., Chauchot, P., Optimal lamination of thin underwater composite cylindrical vessels, Composite Structures Journal. Vol. 58, pp. 529-537 ,2002.
[4] Moon, C. J., Kim, I. H., Choi, B. H., Kweon, J. H., Choi, J. H., Buckling of filament-wound composite cylinders subjected to hydrostatic pressure for underwater vehicle applications, Composite Structures Journal, Vol. 92, pp. 2241-2251, 2010.
[5] Hur, S., H., Son, H. J., Kweon, J. H., Choi, J. H., Postbuckling of composite cylinders under external hydrostatic pressure, Composite Structures Journal, Vol. 86, pp.114-12, 2008.
[6] Han, J. Y., Jung, H. Y., Cho, J. R., Choi, J. H.,Bae, W. B., Buckling analysis and test of composite shells under hydrostatic pressure, Journal of Materials Processing Technology, Vol. 201, pp.742–745, 2008.
[7] Alizadeh, E., Babaei, J., Batalebluie, R., Behrooz, H., Numerical and Experimental Study of Reinforced Composite Vessels with Hoop Stiffeners under External Hydrostatic Pressure,In Persian, Journal of Modelling in Engineering of Semnan University, 25, 16(54), pp: 24-34, 2018.
[8] Alizadeh, E., Babaei, J., Dehestani, P., Batalebluie, R., Behrooz, H., Study of The effect of thickness and initial geometric imperfection of cylindrical composite shell on the buckling behavior in axial pressure,In Persian, Journal of Modelling in Engineering of Semnan University, 11, 16(53), pp.:121-134, 2018.
[9] Ahmadi, I., Analysis of interlaminar stresses in cross-ply composite cylinders subjected to radial loads,’’ in Persian. Journal of science and technology of composites, Vol. 2, No. 3, pp 43-54, 2015.
[10] Khalili, S.M.R. Sedigh, Y. and HosseinAhari, S.M., Experimental and numerical study of the buckling of semi-cylindrical composite lattice, In Persian, Journal of Science and Technology of Composites, 3(3), pp. 269-276, 2016.
[11] Dadashi, A. and Rahimi, G.H., Experimental and numerical investigation of buckling and post-buckling behavior of filament wound composite cylinders under lateral compression loading by parallel rigid plates”, In Persian, Journal of Science and Technology of Composites, 6(1), pp. 151-165,2019.
[12] Elyasi, M., Yousefinezhad, G. H., Zabihpoor, M., Determination of mechanical response of composite cylinders including Circular cutout subjected to uniform external hydrostatic pressure, In Persian, Journal of Modarres Mechanical Engineering, Vol. 15, No. 9, pp 360-370, 2015.
[13] Tafreshi,A., Delamination buckling and post buckling in composite cylindrical shells under combined axial compression and external pressure, Composite StructuresJournal, Vol. 72, pp. 401-418, 2006.
[14] Taheri, B.,Omidi, F., Shokrieh, M., Experimental and Numerical investigation of buckling behavior of composite cylinders with cutout, journal of Thin-Walled Structures, Vol. 116, pp. 136-144, 2017.
[15] Herakovich, C. T., Mechanics of Fibrous Composites Materials, 2nd ed., University of Virginia, USA, 1998.
[16] Kaw, A.K.,Mechanics of Composite Materials, 2nd ed., CRC Press, USA, 2006.
[17] Mohsenishakib, M., Mechanics of Composite Structures, In Persian, Imam Hossein University Press, IRI, 2013.
[18] Harris,B.,Fatigue in composites, CRC Press, USA, 2003.
[19] Gibson, R.F.,Principles of Composite Material Mechanics, 4th ed., CRC Press, USA, 2015.
[20] ASM Handbook, Composites- Vol. 21, 2001.
[21] Budynas, R. G.,Nisbett, J. K., Shigley’s Mechanical Engineering Design, 10th ed., McGraw-HillEducation, 2015.
[22] ShenK., Pan G., Optimizing the buckling strength of filament winding composite cylinders under hydrostatic pressure, Journal of Reinforced plastics and composites, https://doi.org/10.1177/0731684418765989, 37(13), pp.892-904, 2018.
[23] Ghasemi A.R., Hajmohammad M.H., Mass and buckling criterion optimization of stiffened carbon/epoxy composite cylinder under external hydrostatic pressure, Lat. Am. j. solids struct.,http://dx.doi.org/10.1590/1679-78253881, 15(1), Rio de Janeiro, 2018.
[24] ShenK., Pan G., Jiang J., Huang Q., Shi y., Stability of Filament-Wound Composite Cylinders Subjected to Hydrostatic Pressure, Journal of Northwestern Polytechnical University, 36(5), 839-847, 2018, DOI:10.22075/JME.2017.10883.1042.
[25] Shen, K. & Pan, G. ,Journal of Shanghai Jiaotong Univ.(Sci.), 2019, https://doi.org/10.1007/s12204-019-2087-1.